Furman M-8X2 POWER CONDITIONER
A Merit Series Power Conditioner is the perfect low-cost AC power solution for any rack mount system. Install an M-8x2 in to the top slot of your rack, and the eight switched outlets in the rear panel will power up and protect all your equipment up to a 15-amp load. The M-8x2 is designed for applications where lights are not required. Noise Filtration AC noise filtering to reduce radio frequency and electromagnetic interference (RFI/EMI) Surge Protection Spike & surge protection ensures equipment stays safe and your power stays clean 9 Total Outlets 8 rear panel outlets and 1 front panel outlet 15 Amp Rating 15 amp rating, with circuit breaker "Protection OK" Indicator Front panel indicator LED lets you know that your equipment is being protected Wall Wart Spacing Indicator Rear outlets have been spaced to accommodate even the bulkiest of wall warts and adapters Maximum Output Current: 15 amps Line Cord: 6 ft., captive, 14 AWG, with 3-conductor Edison plug Operating Voltage: 120VAC 60Hz Spike Protection Mode: Line to neutral Energy Dissipation: 170 joules Peak Impulse Current: 12,000 amps Maximum Continuous Opterating Voltage: 130 VAC RMS Let Through Voltage (@ 125 amps, 8/20uS waveform) 400 volts Noise Attenuation: Transverse mode: Greater than 23dB, 200Khz to 10 Mhz Dimensions: 1.75??