Audix GS1 Flush-Mount Wall or Ceiling Mic
The GS1 is an innovative flush-mount wall or ceiling microphone designed for distance miking. Features include a fully integrated preamp, an extremely high sensitivity rating of 38 millivolts, and complete immunity from RF interference caused by cell phones and GSM devices.
The GS1 capsule is housed within a patented cradle that enables the microphone to be aimed up to an angle of 45 degrees towards the sound source. Its small footprint and flush-mount configuration allow the microphone to be unobtrusive without sacrificing sound quality.
The GS1 terminates in a terminal block connector and is easy to install into a standard single gang box. A 2.75″ by 4.5″ mounting plate is included. The GS1 comes in a stock satin nickel finish and is also available in white.
Features
High output for distance miking
Immunity from RF interference
Miniaturized integrated preamp circuitry
Includes x 2.75″ by 4.5″ metal mounting plate · No external power adapter
Point and shoot directivity
Designed, assembled & tested in the USA
3-year warranty
Audix GS1 Specs
| Transducer Type | Condenser |
| Frequency Response | 60 Hz – 10 kHz |
| Polar Pattern | Cardioid |
| Output Impedance | 150 ohms |
| Sensitivity | 38 mV / Pascal @ 1k |
| Equivalent Noise Level | 22 dB |
| Signal to Noise Ratio | 72 dB |
| Maximum SPL | ≥130 dB |
| Dynamic Range | 108 dB |
| Power Requirements | 18 – 52 V phantom |
| Connector | 3-pin Phoenix fe |
| Polarity | Positive pressure on diaphragm produces positive voltage on blue (center) Phoenix conductor |
| Materials / Finish | Brass aluminum and steel White or Nickel |
| Weight | Belden 9451 P or 82761 |
| Length | 176 mm / 6.9 in |
