JBL JRX212 12" Two-Way Stage Monitor
The JBL JRX212 12" Two-Way Stage Monitor is a portable loudspeaker designed with a low frequency driver and a 2.5 inch diameter ribbon voice coil. This monitor delivers even more cross sectional wire area in the voice coil than the basic round wire designs. This allows the highest level of efficiency and power handling. The JBL JRX212 12" Two-Way Stage Monitor was designed with high voltage capacitors and inductors. This loudspeaker has been engineered with massive cores and heavy gauge wire allowing the crossover network to handle super high power while eliminating saturation. The Progressive Transition high frequency waveguide brings industry topping line coverage control along with reduced distortion and a much smoother frequency response. The rugged and acoustically remarkable enclosure on this high end loudspeaker is built from a .75 inch Medium Density Fiberboard. JBL engineers used super advanced adhesives and a mechanical fastener technology for the ultimate durability and hugely improved low frequency performance. The JBL JRX212 12" Two-Way Stage Monitor is a truly excellent choice for large stages and venues.
JBL JRX212 12" Two-Way Stage Monitor Features:
- JBL 12 inch low frequency driver with a 64 mm (2.5 in) diameter edgewound ribbon voice coil which provides more cross-sectional wire area in the voice coil gap than round wire designs, for greater efficiency and power handling.
- JBL 2414H-C 25 mm (1 in) polymer diaphragm compression driver improves high frequency performance as well as system reliability.
- The advanced network topology crossover design shapes frequency response and delivers "coherent summation" in the crossover region.
- High-voltage capacitors and inductors with massive cores and heavy gauge wire enable the crossover network to handle high power without saturating.
- Progressive Transition™ high frequency waveguide provides superior coverage control, reduced distortion, and smoother frequency response.
- The rugged, acoustically superior enclosure is constructed from 19 mm (.75 in) MDF (Medium Density Fiberboard) using advanced adhesives and mechanical fastener technology for extreme durability and improved low-frequency performance.
- SonicGuard™ protects the high frequency driver from excess power without interrupting the performance.
- Non-resonant, all-steel handles are used.
- Attractive 18-gauge hexagon perforated, steel grille protects components from damage.
- Dual-angle pole-mount socket allows the speaker to tilt 10°for more uniform audience coverage.
JBL JRX212 12" Two-Way Stage Monitor Specs:
|Power Rating||250 W / 1000 W|
|Frequency Range (-10 dB)||60 Hz - 20 kHz|
|Frequency Response (±3 dB)||80 Hz - 18 kHz|
|Sensitivity (@1m)||98 dB SPL (1w/1m)|
|Nominal Impedance||8 ohms|
|Recommended Amplifier Power||250 W to 500 W into 8 ohms|
|Maximum SPL||128 dB|
|Nominal Dispersion||90º x 50º|
|Crossover Frequency||2.1 kHz|
|Dimensions (H x W x D)||584 mm x 399 mm x 325 mm (23 in x 15.7 in x 12.8 in)|
|Weight||19.5 kg (43 lb)|
|High Frequency Driver||JBL 2414H-C , 1" exit compression driver mounted on Progressive Transition™ Waveguide|
|Low Frequency Driver||JBL M112-8|
|Input Connectors||Neutrik® Speakon® NL-4 (x1); .25 in TS phone jack (x1); parallel|