DBX DriveRack 220i System Processor with AFS™ Advanced Feedback Suppression

DBX DriveRack 220i System Processor with AFS

The DBX DriveRack 220i System Processor with AFS was specifically designed to provide state-of-the-art signal processing. The DriveRack 220i is ideal option for virtually any fixed-install application. With a full complement of processing features and Mic/Line inputs the DriveRack 220i can give you both system and microphone processing. Featuring the new, patent-pending Advanced Feedback Suppression (AFS) algorithm, equalization, dynamics processing, delay, matrix mixing, and bandpass filters, the DriveRack 220i will exceed your expectations.

The  DBX DriveRack 220i System Processor with AFS is piloted from the intuitive DriveWare GUI. This offers both Configuration and Control of the processing modules. Modules can be accessed, edited and saved as part of programs. Processing modules can be linked between the channels to give you true stereo processing. If you need independent processing, parameters can be copied from one channel to the next to ensure that setup is quick and easy. Stored programs can be loaded from either the front panel or from wall mounted  Zone Controllers. Zone Controllers can also be used for output muting or adjusting output volumes.

DBX DriveRack 220i System Processor with AFS Features:

  • Advanced Feedback Suppression (AFS).
  • Graphic and Parametric EQ.
  • Compressor.
  • Limiter.
  • Auto Gain Control.
  • Noise Gating.
  • De-Esser.
  • Ducker.
  • Bandpass Filters.
  • 2x2 Matrix Mixer.
  • 1.3 Seconds of Delay.
  • RS-232 PC GUI control.
  • Mic/Line Inputs.
  • Wall Panel Control.
  • Security Lockout.
  • DOWNLOAD DBX DriveRack 220i System Processor with AFS User Manual.

DBX DriveRack 220i System Processor with AFS Specifications:

Input (2) Switchable line or mic inputs.
Input Connectors Female XLR line inputs and Euroblock.
Input Type Electronically balanced/RF filtered.
Input Impedance >50k ohm.
Max Input 20dBu.
CMRR > 40dB, typically >55db @ 1kHz.
Mic Preamp gain 30 to 60dB.
Mic Preamp Equivalent Input Noise (EIN) < -110dB, 22Hz-22kHz, 150 ohm.
Mic Preamp Phantom Power 15VDC.
Output 2 total.
Output Connectors Male XLR and Euroblock.
Output Type Electronically balanced, RF filtered.
Output Impedance 120ohm balanced, 60ohm unbalanced.
Max Output 20dBu.
A/D Converter dbx Type IV™ Conversion System.
A/D Dynamic Range (line) >113 dB, A-weighted, >110 dB unweighted.
Type IV Dynamic Range >119 dB, A-weighted, 22kHz BW; >117 dB, A-weighted, 22kHz BW.
Sample Rate 48kHz.
D/A Dynamic Range 112 dB A-weighted, 109dB unweighted.
Dynamic Range >110 dB A-weighted, >107dB unweighted.
THD Noise 0.003% typical at 4dBu, 1kHz, 0dB gain.
Frequency Response 20Hz – 20kHz, /- 0.5dB.
Interchannel Crosstalk >110dB, 120dB typical, (input-to-output: >780dB).
Operating Voltage 100 VAC, 50/60Hz, 120 VAC, 60Hz, 230VAC 50/60Hz.
DBX DriveRack 220i System Processor with AFS Dimensions 19” Wide, 1.75”High, 7.7” Deep.
Safety Agency Certifications UL 6500, IEC 60065, EN 55013, E 60065.