Call for Price

Shure SLX24/SM86 Wireless System

The Shure SLX24/SM86 SLX Series wireless microphone systems provide the performance and reliability needed for use in venues, sound reinforcement, etc. The UHF system is available in up to 8 different bands, over a 24 MHz spectrum. This system includes the SLX4 receiver and SLX2 handheld transmitter with a SM586 microphone head. The SLX4 receiver is rack or desktop mountable and features a diversity antenna design. The diversity design allows dual antennas to compete for the strongest possible reception. An XLR microphone level and 1/4" phone line level outputs are featured. A comprehensive LCD display provides frequency, group and channel information as well as transmitter battery status, audio level and more. The SLX2 Handheld Transmitter features the Shure SM86 cardioid capsule. The condenser transducer provides higher sensitivity response than dynamic microphones, enhancing detail and dynamic range. The SLX2 is completely frequency agile featuring a choice of over 960 user selectable frequencies.

SLX24/SM86 Features and Specifications:

  • Sync Between Transmitter & Receiver: The SLX series transmitters and receivers feature an infrared sync feature which allows settings such as frequency and channel to be transferred remotely
  • UHF Diversity: The SLX4 receiver features UHF diversity reception. Dual receivers compete for the strongest possible reception, reducing noise and dropout due to RF interference
  • Mic & Line Level Output: The SLX4 receiver features an XLR mic level and 1/4" phone line level output
  • Extended Battery Life: The SLX2 handheld transmitter operates up to 8 hours on 2 AA size batteries
System: Type Rack/Table Top Mountable UHF Diversity Wireless Handheld System
System: Approx. Working Range 300 Feet (100m)
System: Overall Frequency Response 45Hz - 15kHz, /-2dB
System: Signal-to-Noise Ratio > 100dB A-weighted
System: Number Of Channels 960 Selectable Frequencies
System: Number Of Simultaneous Systems 12 (20 in regions where additional frequency bands are available)
Transmitter: Audio Input Level 2 dBV maximum at -10dB position -8 dBV maximum at 0dB position
Transmitter: Gain Adjustment Range 10dB
Transmitter: RF Transmitter Output 30 mW maximum (dependent on applicable country regulations)
Transmitter: Housing Molded PC/ABS handle and battery cup
Transmitter: Power Requirements 2 "AA" size alkaline or rechargeable batteries
Transmitter: Battery Life >8 hours (alkaline)
Receiver: Housing Galvanized steel
Receiver: Audio Input Level XLR connector (into 600 Ohms load): -13 dBV 1/4 inch connector (into 3000 Ohms load): -2 dBV (ref. /- 38 kHz deviation with 1 kHz tone)
Receiver: Output Impedance XLR connector: 200 Ohms 1/4 inch connector: 1k Ohms
Receiver: XLR output Impedance balanced Pin 1: Ground Pin 2: Audio Pin 3: No signal
Receiver: Sensitivity -105 dBm for 12 dB SINAD, typical
Receiver: Image Rejection >70 dB, typical
Receiver: Power Requirements 12-18 Vdc at 150 mA, supplied by external power supply
Dimensions (H x W x D) Transmitter: 254 x 51mm (10 x 2 in.) Receiver: 42 x 197 x 134mm(1.65 x 7.76 x 5.28")
Weight Transmitter: 290 g (10.2 oz) Receiver: 816 g (28.78 oz)