AtlasIED FAP8CXT 8" Compression Driver Coaxial In-Ceiling Speaker

The AtlasIED FAP8CXT is a premium 8-inch compression driver coaxial in-ceiling speaker designed for high-output sound reproduction in commercial spaces with elevated ceilings. Featuring a true 1-inch exit compression driver, controlled 90° conical dispersion, and a factory-installed 60W 70.7V/100V transformer, the FAP8CXT delivers clear speech intelligibility and powerful music reproduction for demanding installed sound applications.

Part of the AtlasIED Strategy Series II, the FAP8CXT combines a curvilinear polypropylene woofer with a horn-loaded compression driver to provide efficient, controlled sound coverage. Its integrated crossover network ensures proper frequency distribution between the low-frequency and high-frequency drivers.

The speaker is factory-assembled in a tuned and ported 937 cubic inch galvanized steel enclosure designed to extend low-frequency performance.

With a front-mounted transformer tap selector, 8Ω bypass option, and included C-ring/V-rail mounting hardware, the FAP8CXT provides flexible installation options for professional commercial audio systems.

True Compression Driver for High-Output Performance

Unlike conventional coaxial ceiling speakers that use small dome tweeters, the AtlasIED FAP8CXT incorporates a true 1-inch exit compression driver.

The compression driver is coupled to a specially designed conical waveguide horn that provides controlled high-frequency dispersion.

This configuration supports efficient high-frequency reproduction and helps maintain speech clarity at greater listening distances.

The FAP8CXT is particularly useful in large commercial spaces where elevated mounting heights demand greater output and tighter coverage control.

Compression Driver Advantages

• Efficient high-frequency reproduction
• Controlled sound dispersion
• Improved coverage consistency in high-ceiling applications
• Clear speech reproduction at greater listening distances
• Suitable for commercial paging and music systems

Controlled 90° Dispersion for High Ceilings

The FAP8CXT features a 90-degree conical dispersion pattern, specified in the 2kHz octave band.

This controlled coverage pattern is one of the speaker's most important performance characteristics.

In high-ceiling installations, excessively wide speaker dispersion can produce uneven sound levels between the center and edges of the listening area.

The FAP8CXT's tighter pattern helps installers direct sound toward the intended listening area.

This makes it particularly useful for airports, convention centers, large retail spaces, and other commercial environments with elevated ceilings.

Proper speaker placement remains important and should account for mounting height, room acoustics, and required sound pressure levels.

Premium 8-Inch Polypropylene Woofer

The AtlasIED FAP8CXT incorporates an 8-inch low-frequency driver with a curvilinear polypropylene cone.

The curved cone profile is designed to reduce harmonic distortion while supporting clean low-frequency and midrange reproduction.

The woofer operates alongside the compression driver through an integrated crossover network.

This combination provides balanced reproduction for speech and music applications.

Integrated 2kHz Crossover Network

The FAP8CXT features a built-in crossover network with a 2kHz crossover frequency.

The crossover directs lower frequencies to the 8-inch woofer and higher frequencies to the compression driver.

This arrangement helps maintain proper frequency transition between the two drivers.

The result is a coordinated two-way loudspeaker system designed for commercial sound reinforcement, paging, and background music.

Tuned and Ported Galvanized Steel Enclosure

The FAP8CXT includes a factory-assembled, deep-drawn galvanized steel enclosure.

With an internal volume of approximately 937 cubic inches, the enclosure is acoustically tuned and ported to enhance low-frequency reproduction.

This integrated design eliminates the need to select a separate backbox for standard compatible installations.

The steel enclosure provides durable construction suitable for commercial ceiling applications.

Enclosure Features

• Deep-drawn galvanized steel construction
• 937 in³ internal enclosure volume
• Tuned and ported acoustic design
• Extended low-frequency performance
• Factory-assembled speaker and enclosure system
• Suitable for supported commercial ceiling installations

60W 70.7V/100V Transformer

The AtlasIED FAP8CXT includes a high-performance 60-watt 70.7V/100V transformer.

The transformer is designed to minimize insertion loss and maintain low-frequency performance while supporting distributed audio applications.

For 70.7V operation, the speaker provides the following selectable power taps:

• 1.9 watts
• 3.8 watts
• 7.5 watts
• 15 watts
• 30 watts
• 60 watts

These settings allow installers to adjust individual speaker output levels according to room size, ceiling height, and system requirements.

Lower taps can be used in quieter areas, while higher taps provide additional output for larger commercial spaces.

Front-Mounted Tap Selector with 8Ω Bypass

The FAP8CXT features a convenient front-mounted transformer tap selector.

This allows installers to adjust power settings without removing the speaker assembly from the ceiling.

The selector also includes an 8-ohm transformer bypass for direct connection to a compatible low-impedance amplifier.

This flexibility allows the speaker to operate in either a compatible distributed audio system or a low-impedance configuration.

Important: Do not use the 8Ω bypass setting when connected to a 70.7V or 100V amplifier output.

For direct 8Ω operation, AtlasIED's installation instructions specify that amplifier output should not exceed 70W RMS per speaker.

Detachable Phoenix-Style Connector

The FAP8CXT includes a detachable four-pole Phoenix-style locking connector.

This connection arrangement allows installers to prepare wiring before positioning the speaker in the ceiling.

The connector also supports pass-through wiring for compatible distributed audio installations.

Benefits include convenient pre-wiring, simplified installation, and easier access for servicing.

Trap-Door Wiring Access

The speaker enclosure incorporates a trap-door input section designed to accommodate wiring connections.

This arrangement supports installations using compatible rigid or flexible conduit.

The accessible wiring compartment simplifies installation and helps organize connections within the enclosure.

Installers should follow the manufacturer's instructions and applicable electrical codes.

Included Ceiling Mounting Hardware

The AtlasIED FAP8CXT includes a C-ring and V-rail tile bridge mounting system.

This hardware supports installation in compatible suspended ceiling and drywall applications.

The speaker uses a conventional dogleg mounting mechanism that is secured using a screwdriver.

The included mounting system helps installers position and secure the speaker assembly during installation.

The manufacturer specifies a 14-inch ceiling cutout.

For additional safety, AtlasIED recommends using the enclosure's auxiliary suspension point with a suitable overhead anchor.

Press-Fit Architectural Grille

The FAP8CXT features a press-fit grille designed to complement contemporary commercial interiors.

The grille provides a clean appearance without visible front mounting screws.

Its paintable finish allows the speaker to blend with selected ceiling designs.

The press-fit design also provides convenient access to the front-mounted transformer selector.

Ideal Applications for the AtlasIED FAP8CXT

The FAP8CXT is designed for commercial environments requiring high-output audio and controlled speaker coverage.

Common applications include:

• Airports and transportation facilities
• Convention centers
• Large retail stores
• High-ceiling commercial spaces
• Conference facilities
• Educational institutions
• Commercial paging systems
• Public address systems
• Background music installations
• Large open commercial areas
• Professional distributed audio systems

Its compression driver, 90° dispersion, and 60W transformer make it particularly suitable for installations where conventional wide-dispersion ceiling speakers may not provide the desired coverage control.

AtlasIED FAP8CXT Key Features

• Premium 8-inch compression driver coaxial ceiling speaker
• AtlasIED Strategy Series II
• True 1-inch exit compression driver
• Conical waveguide horn
• 90° conical dispersion at the 2kHz octave band
• Curvilinear polypropylene woofer cone
• Integrated 2kHz crossover network
• 60Hz–15kHz frequency response
• 92dB average sensitivity
• Factory-installed 60W 70.7V/100V transformer
• Selectable 1.9W, 3.8W, 7.5W, 15W, 30W, and 60W taps
• 8Ω transformer bypass
• Front-mounted tap selector
• Tuned and ported 937 in³ enclosure
• Deep-drawn galvanized steel construction
• Detachable four-pole Phoenix-style connector
• Trap-door wiring access
• Included C-ring/V-rail mounting hardware
• Press-fit architectural grille
• Suitable for high-ceiling commercial installations
• UL 1480 safety listed
• 60-month manufacturer warranty

AtlasIED FAP8CXT Technical Specifications

Specification	Details
Manufacturer	AtlasIED
Model	FAP8CXT
Product Series	Strategy Series II
Product Type	Compression Driver Coaxial In-Ceiling Speaker
Woofer Size	8" (203mm)
Woofer Cone	Curvilinear Polypropylene
High-Frequency Driver	1" Exit Compression Driver
High-Frequency Horn	Conical Waveguide
Speaker Type	Coaxial
Frequency Response	60Hz–15kHz (±5dB)
Sensitivity	92dB Average
Dispersion	90° Conical (2kHz Octave Band)
Crossover Frequency	2kHz
Transformer	60W, 70.7V/100V
70.7V Transformer Taps	1.9W, 3.8W, 7.5W, 15W, 30W, 60W
Low-Impedance Operation	8Ω Transformer Bypass
Maximum Amplifier Output at 8Ω	70W RMS per Speaker
Enclosure	Tuned and Ported
Enclosure Material	Galvanized Steel
Enclosure Volume	937 in³
Input Connector	Detachable Four-Pole Phoenix-Style
Wiring Access	Trap-Door Input Section
Mounting Hardware	C-Ring/V-Rail Tile Bridge Included
Grille	Press-Fit
Diameter	15¾" (40.005 cm)
Overall Height	12¾" (32.4 cm)
Ceiling Cutout	14" (35.6 cm)
Shipping Weight	23 lbs (10.43 kg)
Safety Listing	UL 1480
Manufacturer Warranty	60 Months from Date of Purchase

Why Buy the AtlasIED FAP8CXT from Audio Supply?

At Audio Supply, we specialize in professional audio equipment for commercial paging, public address, and distributed sound systems.

The AtlasIED FAP8CXT combines high-output compression driver performance, controlled 90° coverage, and a factory-installed 60W transformer, making it a practical choice for demanding commercial installations with elevated ceilings.

Whether you're upgrading an existing paging system or designing a new high-ceiling sound system, Audio Supply can help you select professional audio equipment suited to your installation requirements.