Introducing the Crown CDi 2000, a powerful 2-channel 70V power amplifier that delivers premium audio quality. This amplifier boasts an impressive 800W power output, making it the ideal choice for professional audio applications. Equipped with a range of features, including USB interface, EQ, and balanced and unbalanced inputs, this amplifier provides a customizable audio experience. Its sleek black design and rack-mountable construction make it the perfect addition to any pro audio setup.
The Crown CDi 2000 2-Channel Amplifier was designed as a professional solid state power amplifier. It was engineered for installed sound applications. The series is super durable and lightweight. The Crown CDi 2000 2-Channel Amplifier deleivers an amazing value in its class. The Crown CDi series amplifiers were created with a front-panel LCD screen to assist installers through configurations. CDi amplifiers are built with an onboard DSP for loudspeaker signal processing. The Crown CDi 2000 2-Channel Amplifier also includes a switch-mode universal power supply, highly useful function indicators, proportional-speed fan-assisted cooling, removable Phoenix-style inputs, barrier strip outputs for low-Z or 70V/100V/140V loads, short-circuit protection and more. This power amplifier gives you top of the line protection circuitry guards against shorted outputs, open circuits, DC, mismatched loads, general overheating, high-frequency overloads and internal faults. The Crown CDi 2000 Amplifier also comes stacked with integrated DSP presets for crossover frequencies, EQ, limiting, compression, delay, and a subharmonic synthesizer. A backlit LCD also displays important system status updates and other information.
Crown CDi 2000 FEATURES:
-
-Rugged and lightweight steel construction.
-
-Operates in dual or bridge-mono modes.
-
-Rack mountable.
-
-Excellent sound reproduction with low distortion.
-
-Advanced protection circuitry protects against overheating, overloads, and shorts.
-
-Switch-mode universal power supply.
-
-Wide range of speaker impedances and outputs
-
-Backlit LCD.
-
-Integrated DSP.
Crown CDi 2000 SPECIFICATIONS:
|
Frequency Response
|
20Hz - 20kHz (@ 1W into 4 Ohms).
|
|
Sensitivity
|
1.4V @ 8 Ohms.
|
|
Signal to Noise Ratio
|
100dB.
|
|
Voltage Gain
|
30.5dB (@ 1kHz, 8 Ohm Rate Output).
|
|
Load Impedance
|
Rated for 2-8 Ohms in Stereo Mode. Rated for 4-16 Ohms in Bridge-Mono Mode.
|
|
Input Impedance
|
20 kOhms (Nominal).
|
|
Output Power
|
1000W @ 2 Ohm Dual (Per Channel). 800W @ 4 Ohm Dual (Per Channel). 475W @ 8 Ohm Dual (Per Channel). 2000W @ 4 Ohm Bridge-Mono. 800W @ 70V Dual (Per Channel). 1600W @ 140V Bridge-Mono.
|
|
Damping Factor
|
Better than 500 from 20 to 400Hz.
|
|
Crosstalk
|
>70dB Below Rated Power, 20Hz to 1kHz.
|
|
Max Input Signal
|
22dBu Typical.
|
|
Inputs
|
2 x 3-Pin Removable Phoenix-Type.
|
|
Outputs
|
4-Position Barrier Strip with Connectors for Dual Loudspeakers or Bridge-Mono Loudspeaker.
|
|
Power
|
100V, 120V-240V, 50/60 Hz.
|
|
Dimensions (WxHxD)
|
19 x 3.5 x 12.25" (483 x 89 x 311mm).
|
|
Weight
|
19 lb (8.6 kg).
|
