The Crown CDi 6000 2-Channel Amplifier is a power amplifier that is designed for installed sound applications. The Crown CDi 6000 2-Channel Amplifier is extremely durable and lightweight. This amplifier features a LCD screen on the front panel which assissts installers through configurations. Crown CDi 6000 includes an on-board DSP for loudspeaker signal processing. This solid state amplifier features a switch-mode universal power supply, extremely useful function indicators, proportional-speed fan-assisted cooling, removable Phoenix-style inputs, barrier strip outputs for low-Z or 140V load, short-circuit protection and much more. The Crown CDi 6000 2-Channel Amplifier has outputs that can be used as dual or bridged mono modes of operation. The bridged-mono mode bridges the outputs to provide you with increased output voltage. The Crown CDi 6000 is protected against shorted, open or mismatched loads; overloaded power supplies; excessive temperature; chain destruction phenomena; excessive output current, and input overload damage. A 3 year warranty is included.
Crown Cdi 6000 2-Channel Amplifier Features
- Extremely versatile; rated for 2-, 4-, 8-ohm loads and 70V and 140V outputs.
- Switch-mode universal power supply.
- Intuitive front-panel LCD screen for quick, easy configuration.
- Onboard digital signal processing includes crossovers, EQ filters, delay, and output limiting.
- Up to 20 user defined DSP presets are available
Crown CDi 6000 Specifications
| Channels |
2 |
| Sensitivity (for full rated power at 8 ohms) |
1.4V |
| Rated Power Output (per channel @ 4 ohms) |
2100W Stereo |
| Signal to Noise Ratio (below rated 1 kHz power at 8 ohms) |
103 dB (A-weighted) |
| THD |
< 0.5% |
| Damping Factor (20 Hz to 400 Hz) |
> 500 |
| Frequency Response (at 1W, 20 Hz - 20 kHz) |
+ 0 dB, -1 dB |
| Crosstalk (below rated power) 20 Hz to 1 kHz |
>70 dB |
| Input Impedance (nominal) |
20k ohms balanced, 10k ohms unbalanced |
| Dimensions |
3.5" x 19" x 16.2" |
| Weight |
30.0 lbs |
| IEC Power Connector |
15A |
