Shure PGXD14/85 Digital Wireless System
The Shure PGXD14/85 Digital Wireless System includes a PGXD1 Bodypack Transmitter with WL185 Lavalier Microphone and a PGXD4 Wireless Receiver. The PGX Digital Vocal Wireless System adds the clarity of 24-bit digital audio to the renowned PGX line of Shure wireless products. Offering tailored wireless solutions for vocalists, guitarists, and presenters, PGX Digital combines the trusted legacy of Shure microphones with state of the art, 24-bit digital wireless technology that delivers strong, clean RF performance. The result is wireless audio that sounds like wired, rock-solid RF signal, and simple setup and operation. The rugged PGXD1 bodypack transmitter easily clips onto a belt or guitar strap, and provides you with a 20Hz - 20kHz frequency range, up to 10 hours of continuous use on 2 standard AA batteries (not included), and 200' of wireless freedom. The PGDX4 receiver offers 24-bit/48kHz accurate sound, offers technology for incredibly accurate sound, auto frequency selection, and greater reliability thanks to its true digital diversity. The WL185 is recommended for general purpose sound reinforcement applications requiring good rejection of ambient noise. Use of the included windscreen is highly recommended. It has a pickup angle of 130 degrees. FEATURES PGXD1 Bodypack Transmitter with WL185 Lavalier Microphone
- Cardioid condenser lavalier microphone for general purpose sound reinforcement
- Smooth extended frequency response with presence rise specially tailored for chest-worn microphone operation
- Power, mute, and battery status LED
- Up to 10 hours of continuous use from 2 AA batteries
- 200" (60m) operating range
- Rugged construction for reliable performance show after show
- Low-profile bodypack, easily clips onto belts or clothing
PGXD4 Wireless Receiver
- 24-bit / 48kHz digital technology for incredibly accurate sound
- Automatic frequency selection locates a clear channel instantly
- One-touch sync automatically syncs the transmitter and receiver
- True digital diversity delivers rock-solid wireless signal reliability
- Up to 5 systems can be used at once
- 1â„4" and XLR audio outputs
- Included padded carrying case for portability and protection
Applications
- Vocalists
- Guitarists/bassists
- Brass/Woodwinds
- Aerobics
- Houses of Worship
- Small Theaters
- Schools/Lecture Halls
- Karaoke
Includes
- PGXD1 Bodypack Transmitter
- PGXD4 Wireless Receiver
- WL185 Lavalier Microphone
- Tie clip
- Windscreen
- Padded carrying case
- 2 AA batteries
Shure PGXD14/85 SPECIFICATIONS
PGXD14/85 Digital Wireless System with WL185 Lavalier Mic
- PGXD1 transmitter
- Audio input level: 10 dBV maximum, at minimum gain setting -16 dBV maximum, at maximum gain
- Gain adjustment range: 26dB
- Input impedance: 1MΩ
- RF Output Level: 10 mW maximum (dependent on applicable country regulations)
- Dimensions (HxWxD): 108mm x 64mm x 19mm (4.25"x 2.50" x 0.75")
- Weight: 128g (4.5oz.) without batteries
- Housing: Molded polycarbonate case
- Power requirements:
- Battery Life: Up to 10 hours
-
- PGXD4 receiver
- Dimensions (HxWxD): 40mm x 181mm x 104mm (1.6" x 7.125" x 4.1")
- Weight: 289g (10.2oz.)
- Housing: ABS
- Audio Output Level (ref. ±38kHz deviation, 1kHz tone): XLR connector (into 3000Ω load): -2.5dBV 1/4" connector (into 10000Ω load): 10 dBV
- Impedance:
- XLR: 50Ω
- 1/4": 50Ω
- Sensitivity: -102 dBm @ 10-5 BER
- Image rejection: > 70dB, typical
- XLR output:
- Impedance balanced Pin 1: Ground (cable shield)
- Pin 2: Audio
- Pin 3: No Audio
- Audio LED:
- Red: 2dB below clip
- Amber: 12dB below clip
- Green: 50dB below clip
- Power Requirements: 12-18 Vdc at 150 mA, supplied by external power supply
- Pin Assignments: XLR: 1 = ground, 2 = hot, 3 = cold 6.35mm (1/4") TRS: Tip = audio, Ring = no audio, Sleeve = ground
-
- WL185 Lavalier Microphone
- Type: Condenser (electret bias)
- Frequency Response: 50 to 17,000Hz
- Output Impedance: 1800Ω
- Sensitivity (1 Pa = 94 dB SPL): -45.5 dBV/Pa
- Maximum Sound Pressure Level: 130.5 dB SPL
- Output Noise (A-weighted): WL185: 28.0 dB SPL
- Dynamic Range: 102.5dB
- Polarity: Positive pressure on diaphragm produces positive voltage on pins 3 and 4 relative to pin 1
- Power Requirements: Regulated nominal 5 Vdc (1.5 Vdc to 10 Vdc) provided at microphone connector pin 2 relative to pin 1 of a Shure wireless microphone transmitter