The Shure MX184 Microflex Lavalier Microphone is a Microflex Lavalier microphones bring a new level of sophistication to personal voice reproduction. Like all Microflex family microphones, the Lavaliers use Shure's interchangeable condenser cartridges, available in cardioid, supercardioid or omnidirectional polar patterns. That means you can be sure there's a Microflex Lavalier that's right for your job.
Shure MX184 Microflex Lavalier Microphone Features:
Interchangeable cartridges for omni-directional, cardioid and super-cardioid polar patterns
Includes pivoting, single-microphone tie clip and dual microphone tie clip
Black, Snap-fit Foam Windscreen
Compatible with all Shure wireless transmitters
Attached 4-foot cable with Tini Q-G connector
Shure MX184 Microflex Lavalier Microphone Specs:
| Transducer |
Electret Bias Condenser |
| Polar Pattern |
Supercardioid |
| Frequency Response |
50 Hz - 17 kHz |
| Dynamic Range (Typical) |
94 dB, (@ 1 kHz, A-Weighted) |
| Signal-to-Noise Ratio |
66 dB |
| Maximum Input Sound Level |
122 dB, (@ 1 kHz, 1% THD) |
| Power Requirements |
11 - 52v DC (with Belt Clip Preamp) |
| Output Impedance |
150 ohms (180 Ohms Actual) |
| Output Connectors |
XLR-3M Type |
| Pad |
None |
| Low Frequency Roll-Off |
None |
| Applications |
Radio, Videography, Television and Broadcast. |
| Dimensions |
Microphone Housing: .85 x .46" (22 x 12mm) LxDiameter In-Line Pre-Amp: 3.89 x .79" (99 x 20mm) LxW Cable: Approximately 4' (1.2m) Long (w/TA4F Connector) |
| Weight |
.12 oz. (3.4 g) |
