Transducer
|
Condenser
|
Frequency Response
|
50 to 17,000 Hz
|
Output Impedance
|
180 ohms actual (EIA rated at 150 ohms)
|
Sensitivity
|
-33.5 dBV/Pa (21.1 mV)
|
Maximum SPL
|
122.7 dB (1 kHz at 1% THD, 1 k ohm load)
|
Equivalent Output Noise (A-weighted)
|
26.5 dB SPL
|
Signal to Noise Ratio
|
67.5 dB (referenced at 94 dB SPL)
|
Dynamic Range at 1 k ohm load
|
96.2 dB 100 dB at 0 gain
|
Common Mode Rejection
|
45.0 dB minimum
|
Preamplifier Output Clipping Level
|
-6.0 dBV (0.5 V) -12 dBV at 0 gain (1% THD)
|
Polarity
|
Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector
|
Power Requirements
|
11 to 52 Vdc phantom, 2.0 mA
|
Environmental Requirements
|
Operating Temperature Range: -18 to 57 degrees C (0 to 135 degrees F) Relative Humidity: 0 to 95%
|
Cable Length
|
30 ft (9.1 m)
|
Dimensions (L x Dia)
|
Microphone: 5.69 x .46" (144.5 x 11.7 mm) Mounting Plate: 4.45 x 2.70"(113 x 68.58 mm)
|
Weight
|
17.8 oz. (504.6 g)
|