The Shure UA505 Remote Antenna Mounting Bracket Kit provides a practical solution for positioning a compatible half-wave wireless receiver antenna away from an equipment rack or receiver. Designed for professional wireless microphone installations, the UA505 allows technicians to relocate an antenna to a wall or suitable microphone stand position where improved line-of-sight coverage may help deliver more reliable RF reception.

The kit includes one antenna mounting bracket, a BNC bulkhead adapter, and a retaining nut. Its compact design makes it useful for live sound, houses of worship, theaters, broadcast facilities, conference rooms, and other professional AV environments where antenna placement is important.

By allowing flexible antenna positioning, the UA505 helps installers address reception challenges caused by equipment racks, metal obstructions, and unfavorable antenna locations.

Remote Antenna Mounting for Improved RF Coverage

Proper antenna placement is essential for reliable wireless microphone performance.

Antennas positioned behind equipment racks or near large metal surfaces may experience reduced reception because of signal obstruction and reflections.

The Shure UA505 allows a compatible half-wave antenna to be mounted remotely, helping establish a clearer RF path between the antenna and wireless microphone transmitters.

For best results, antennas should be positioned away from metal obstructions and located where the transmitter has a clear path to the receiving antenna.

The UA505 does not amplify RF signals or eliminate interference. Its purpose is to provide a secure mounting location that supports effective antenna placement.

Flexible Wall and Microphone Stand Installation

The UA505 supports multiple mounting arrangements for professional wireless installations.

Wall Mounting: Install the bracket on a suitable wall or structural surface to position the antenna away from equipment racks and other obstructions.

Microphone Stand Mounting: Use an appropriate microphone stand mounting arrangement when temporary or adjustable antenna positioning is required.

This flexibility makes the UA505 useful for both permanent installations and portable wireless microphone systems.

The compact bracket allows installers to place the antenna where reception conditions are more favorable rather than being limited to the receiver's physical location.

Designed for Compatible Half-Wave Antennas

The Shure UA505 is intended for remote mounting of compatible half-wave receiver antennas.

Half-wave antennas are commonly used in professional wireless microphone systems because they can operate effectively when mounted away from the receiver chassis.

The UA505 uses a BNC bulkhead adapter to provide a connection point for a suitable antenna and coaxial cable.

It can be incorporated into compatible Shure wireless installations, including systems using external BNC antenna connections.

Potential applications include Shure BLX4R, SLX-D, SLX-D+, QLX-D, and ULX-D wireless receiver systems when paired with suitable antennas and RF cabling.

Important: Shure does not recommend quarter-wave antennas for this remote mounting arrangement. Confirm antenna type, frequency range, and connector compatibility before installation.

Proper Antenna Placement and Cable Selection

A remote antenna installation should account for antenna position, separation, cable length, and RF signal loss.

Shure recommends locating receiving antennas as high as practical, away from metal obstructions, and maintaining clear visibility toward the wireless transmitter whenever possible.

For systems using two diversity antennas, appropriate antenna separation is also important.

The UA505 is designed for use with suitable 50-ohm low-loss coaxial antenna cables.

Examples include Shure UA825 and UA850 antenna cables, depending on the installation distance and system requirements.

Longer cable runs introduce additional RF loss, so cable selection should be considered when designing the wireless system.

Compact Construction for Professional Installations

The UA505 provides a dedicated mounting location for one compatible receiver antenna without requiring a complete antenna rack panel.

Its compact bracket design is especially useful when an antenna must be installed at a specific location within a venue.

The included bulkhead adapter creates a secure antenna connection point, while the retaining nut helps hold the adapter in position.

Because the UA505 is a passive mechanical mounting accessory, it requires no electrical power, software configuration, or RF adjustment.

It is suitable for professional installations where clean antenna positioning and accessible connections are priorities.

Shure UA505 Key Features

  • Remote mounting bracket for compatible wireless receiver antennas
  • Designed for one half-wave antenna
  • Supports wall mounting applications
  • Supports suitable microphone stand mounting arrangements
  • Allows antennas to be positioned away from equipment racks
  • Helps improve antenna line-of-sight placement
  • Includes BNC bulkhead adapter
  • Includes bulkhead adapter retaining nut
  • Compatible with appropriate 50-ohm low-loss coaxial cables
  • Compact design for professional wireless installations
  • No external power required
  • Suitable for permanent and portable AV systems

Technical Specifications

Specification Details
Manufacturer Shure
Model UA505
Product Type Remote Antenna Mounting Bracket Kit
Antenna Capacity One
Antenna Type Compatible Half-Wave Receiver Antenna
Mounting Applications Wall or Suitable Microphone Stand
RF Connection BNC Bulkhead Adapter
Recommended Cable Type 50 Ω Low-Loss Coaxial
Bracket Length 4.662 in. (118.4 mm)
Bracket Width 1.25 in. (31.8 mm)
Bracket Height 1.662 in. (42.2 mm)
External Power Required No
RF Amplification None
Antenna Included No
Coaxial Cable Included No

What's Included

  • (1) Shure UA505 antenna mounting bracket
  • (1) BNC bulkhead adapter
  • (1) Bulkhead adapter retaining nut

Note: Antenna, coaxial antenna cable, and bracket mounting hardware, including screws and washers, are sold separately.

Ideal Applications

Live Sound and Touring: Position receiver antennas away from equipment racks to establish more favorable RF reception locations.

Houses of Worship: Install wireless receiver antennas on walls or other suitable mounting locations for improved coverage.

Theater and Performing Arts: Relocate antennas away from backstage equipment racks and metal obstructions.

Broadcast and Video Production: Provide flexible antenna placement for compatible professional wireless microphone receivers.

Corporate AV Installations: Support organized antenna positioning in meeting rooms, presentation spaces, and conference facilities.

Educational Facilities: Mount wireless microphone antennas in auditoriums, classrooms, and multipurpose venues.

Need Front-Mounted Antennas for an Equipment Rack?

For installations requiring multiple antenna connections on a standard 19-inch equipment rack, consider the Shure UA440 Front Mount Antenna Rack Kit.

While the UA505 remotely mounts one compatible half-wave antenna, the UA440 provides four front-panel antenna connections for organized wireless receiver rack installations.

Why Buy the Shure UA505 from Audio Supply?

Audio Supply offers genuine Shure professional wireless microphone equipment and RF accessories for live sound, theater, broadcast, houses of worship, and commercial AV installations.

The Shure UA505 provides a straightforward way to remotely position compatible receiver antennas, helping installers create cleaner and more effective wireless microphone installations.

List price: $70.00
Price: $46.00