The Shure UA8100 100-Foot Coaxial Antenna Cable provides extended RF connectivity for professional wireless microphone systems requiring remote antenna placement. Featuring 50-ohm RG213/U-type coaxial construction and BNC connectors on both ends, the UA8100 is designed to connect compatible wireless antennas, receivers, and antenna distribution equipment over longer distances.
With a length of 100 feet (approximately 30.5 meters), the UA8100 allows installers to position wireless receiver antennas away from equipment racks and closer to areas where reliable RF coverage is needed.
This cable is suitable for live sound, theater, broadcast, houses of worship, corporate AV, and other professional installations where antenna location is critical to wireless system performance.
100-Foot Extension for Remote Antenna Placement
Proper antenna placement is one of the most important considerations in a professional wireless microphone installation.
When receivers are installed in equipment rooms, backstage racks, or enclosed cabinets, their antennas may not have a clear RF path to the performance or presentation area.
The Shure UA8100 provides 100 feet of cable length, allowing compatible antennas to be positioned at more favorable locations.
Remote mounting can help installers avoid obstructions such as equipment racks, walls, and large metal structures.
The UA8100 is particularly useful for installations where antennas must be positioned in a theater, auditorium, worship space, or event venue while the wireless receivers remain in a separate equipment location.
RG213/U-Type 50-Ohm Coaxial Construction
The UA8100 uses RG213/U-type coaxial cable designed for professional 50-ohm RF applications.
Its coaxial construction provides a shielded signal path between compatible antennas and wireless equipment.
The 50-ohm impedance is appropriate for professional wireless microphone systems using matching RF connections.
Compared with shorter antenna cables, a 100-foot cable run introduces additional RF attenuation.
The UA8100 does not amplify or restore RF signal strength. Proper antenna selection, cable routing, and system gain planning are essential when using longer antenna extensions.
BNC Male-to-Male Antenna Connections
The Shure UA8100 features BNC male connectors on both ends.
These connectors are widely used with professional wireless microphone receivers, remote antennas, and antenna distribution equipment.
The BNC twist-lock design provides a secure RF connection for fixed and portable installations.
The cable can be used to connect compatible antennas to receiver antenna inputs or to the appropriate RF input on an antenna distribution system.
Before installation, confirm that both connection points use compatible BNC connectors and 50-ohm RF connections.
Compatible with Modern Shure Wireless Systems
The Shure UA8100 can be used with compatible professional wireless systems that support external BNC antenna connections.
Potential applications include:
-
Shure BLX4R rack-mount wireless receivers
-
Shure SLX-D digital wireless receivers
-
Shure SLX-D+ digital wireless receivers
-
Shure QLX-D digital wireless receivers
-
Shure ULX-D digital wireless receivers
-
Compatible Shure antenna distribution systems
-
Compatible Shure remote antenna mounting accessories
The UA8100 is also suitable for other professional RF equipment requiring a 50-ohm BNC-to-BNC coaxial connection.
Compatibility depends on the receiver's antenna connection requirements, operating frequency, and overall RF system design.
Managing RF Signal Loss Over Long Cable Runs
All coaxial antenna cables introduce signal loss, and attenuation increases with cable length and operating frequency.
For a 100-foot antenna installation, RF loss can become significant.
Shure recommends carefully evaluating cable type, antenna gain, operating frequency, and cable length when designing remote antenna systems.
Depending on the installation, a lower-loss cable or properly selected antenna amplifier may be necessary to maintain adequate RF signal levels.
Amplifier gain should be selected to compensate for appropriate system losses rather than simply maximizing signal strength.
For reliable operation, installers should minimize unnecessary connectors and avoid using longer cable runs than required.
Flexible Installation for Professional Venues
The UA8100 is useful for both permanent and temporary wireless microphone installations.
In fixed installations, it can connect antennas positioned in performance spaces to receivers located in equipment rooms.
For portable sound systems, the cable provides flexibility when antenna placement must be adjusted to suit a particular venue.
The 100-foot length can also support remote antenna locations in large conference rooms, auditoriums, theaters, and multipurpose facilities.
Proper cable routing and protection are important to prevent connector damage, excessive bending, and mechanical strain.
Shure UA8100 Key Features
-
Genuine Shure 100-foot coaxial antenna extension cable
-
Approximately 30.5-meter cable length
-
RG213/U-type coaxial construction
-
50-ohm characteristic impedance
-
BNC male connector on each end
-
Designed for compatible professional wireless microphone systems
-
Supports remote antenna placement
-
Connects antennas to compatible receivers and RF distribution equipment
-
Suitable for longer antenna extension applications
-
Shielded coaxial construction
-
Useful for fixed and portable AV installations
-
No external power required
Technical Specifications
|
Specification
|
Details
|
|
Manufacturer
|
Shure
|
|
Model
|
UA8100
|
|
Product Type
|
Coaxial Antenna Extension Cable
|
|
Cable Length
|
100 ft. (approximately 30.5 m)
|
|
Cable Type
|
RG213/U
|
|
Characteristic Impedance
|
50 Ω
|
|
Connector A
|
BNC Male
|
|
Connector B
|
BNC Male
|
|
Connector Configuration
|
BNC-to-BNC
|
|
Cable Construction
|
Shielded Coaxial
|
|
Primary Application
|
Remote Wireless Antenna Connections
|
|
RF Amplification
|
None
|
|
External Power Required
|
No
|
|
Quantity Included
|
1 Cable
|
Ideal Applications
Live Sound and Concert Venues: Position compatible wireless receiver antennas away from equipment racks and closer to performance areas.
Theater and Performing Arts: Connect remotely mounted antennas to wireless receivers located backstage or in equipment rooms.
Houses of Worship: Extend antenna connections to locations offering more favorable wireless microphone coverage.
Broadcast and Video Production: Support remote antenna placement for professional wireless microphone installations.
Corporate AV Systems: Connect wireless receiver antennas in conference facilities and presentation environments.
Educational Facilities: Provide longer antenna connections for auditoriums, lecture halls, and multipurpose spaces.
Why Buy the Shure UA8100 from Audio Supply?
Audio Supply offers genuine Shure wireless microphone equipment, coaxial antenna cables, and RF accessories for live sound, theater, broadcast, houses of worship, and commercial AV installations.
The Shure UA8100 provides a 100-foot BNC-to-BNC connection for professional wireless systems requiring remote antenna placement. Audio Supply can help customers identify appropriate antenna accessories and cable configurations for their installations.
Need a Remote Antenna Mounting Bracket?
The Shure UA505 Remote Antenna Mounting Bracket Kit provides a convenient mounting solution for compatible half-wave wireless receiver antennas.
When used with an appropriately designed RF system, the UA505 and UA8100 can support remote antenna placement away from equipment racks and other obstructions.