This Shure ULXD4Q Quad Digital Wireless Receiver is a top-of-the-line addition to your pro audio equipment. It boasts wireless connectivity and a wireless handheld feature for easy use. With a G50 Band of 470-534MHz, this microphone receiver is perfect for musicians and performers who demand the best sound quality possible. The ULXD4Q model is a must-have for any musical instrument and gear enthusiast.
The Shure ULXD4Q 4-Channel Digital Wireless Receiver features 4 wireless channels with independent gain control, LED meters, and XLR outputs. It is tuned to Shure's J50 band and operates between 572 to 636 MHz. The ULXD4Q is capable of handling 24-bit/48 kHz audio and can provide AES-256-bit encryption to assure your wireless signal is kept secure.
The dual Ethernet ports allow multiple units to share RF signal as well as be networked together and controlled via Shure's Wireless Workbench 6 Software. The Ethernet ports also provide compatibility with the Dante digital networking system. Each of the four channels can provide up to 60 dB of adjustable gain. The dual antennas are capable of digital predictive switching diversity to reduce interference and signal dropouts. The unit can be rack mounted with the included rack hardware.
Shure ULXD4Q Features:
-
Four receivers in a 1RU metal chassis with internal power supply
-
Individual gain controls, LED meters, and XLR outputs for each channel
-
Up to 64 MHz tuning range (region dependent)
-
Digital predictive switching diversity
-
High Density mode optimizes ULX-D systems to simultaneously operate significantly more channels in applications up to 30 meters
-
RF cascade ports allow distribution of RF signal to another unit
-
Optimized scanning automatically finds, prioritizes, and deploys the cleanest frequencies to transmitters over IR sync
-
Bodypack frequency diversity ensures uninterrupted audio for mission-critical applications
-
Audio summing routes two or more audio channels to combinations of receiver outputs. Use each channel's gain adjustment to reach the desired mix
-
Ethernet networking for streamlined frequency coordination and deployment across multiple receivers
-
Interference detection and alerts provided on both the receiver and WWB6
-
Wireless Workbench 6 (WWB6) software integration for advanced coordination, monitoring, and control
-
AMX/Crestron control
-
Compatible with the AXT600 Axient Spectrum Manager
-
Intuitive front panel LCD meNUand controls with lockout feature
-
Upgraded LCD with adjustable contrast and brightness
-
Audio and RF LED meters with peak indicator
-
Switchable mic/line output level
-
Remoteable 1/2 wave antennas
Shure ULXD4Q Specifications:
Receiver
|
RF Input
|
Spurious Rejection: > 80 dB, Typical Connector Type: BNC Impedance: 50 ? Bias Voltage: 12 to 13 V DC, 150 mA Maximum, Per Antenna
|
|
Cascade Output
|
Connector Type: BNC (For Connecting of One Additional Receiver in the Same Band) Configuration: Unbalanced, Passive Impedance: 50 ? Insertion Loss: 0 dB
|
|
Audio Output
|
Gain Adjustment Range: -18 to 42 dB (in 1 dB Steps, Plus Mute Setting) 4x Balanced XLR Outputs Impedance: 100 ? Line Setting: 18 dBV Mic Setting: -12 dBV Mic/Line Switch: 30 dB Pad Phantom Power Protection: Yes
|
|
Network
|
Network Interface: Dual Port Ethernet 10/100 Mbps, 1 Gbps, Dante Digital Audio Network Addressing Capability: DHCP or Manual IP Address Maximum Cable Length: 328' (100 m)
|
|
Power Requirement
|
100 to 240 V AC, 50 to 60 Hz, 0.32 A Maximum
|
|
Dimensions (H x W x D)
|
1.7 x 18.9 x 10.7" (44 x 482 x 274 mm)
|
|
Weight
|
7.6 lb (3.45 kg)
|
Shipping Info
|
Shipping Weight
|
14.2 lb
|
|
Box Dimensions (WxHxD)
|
18.0 x 3.5 x 27.3
|
