The Crown XLS2002 DriveCore 2 is a professional two-channel power amplifier designed for live sound reinforcement, DJ systems, passive loudspeakers, and commercial audio installations. Delivering 650 watts per channel at 4 ohms, 1,050 watts per channel at 2 ohms, and up to 2,100 watts in bridged 4-ohm operation, the XLS2002 provides substantial output power in a compact, lightweight rackmount chassis.

Positioned between the XLS1502 and XLS2502 in Crown's DriveCore 2 amplifier family, the XLS2002 offers a practical balance of power, portability, and integrated loudspeaker management. Its efficient Class D architecture helps reduce unnecessary heat and electrical consumption, making it suitable for mobile sound systems and permanent installations.

The amplifier features Crown's PureBand crossover system, providing high-pass, low-pass, and band-pass filtering for compatible loudspeakers and subwoofers. Integrated Peakx limiters help manage excessive output levels and provide additional protection for connected speakers.

For flexible system integration, the XLS2002 includes balanced XLR, 1/4-inch, and RCA audio inputs, along with professional Speakon and binding-post speaker outputs. Selectable 0.775V and 1.4V input sensitivity settings allow the amplifier to accommodate different mixers, processors, and audio sources.

A large front-panel LCD simplifies setup and configuration, while adjustable indicator lighting, automatic sleep functionality, remote power triggering, and menu security provide additional convenience.

Weighing only 10.8 pounds and measuring 10.7 inches deep, the Crown XLS2002 is well suited for professional audio systems requiring dependable amplification without excessive rack space or equipment weight.

Features & Benefits

Powerful Two-Channel Amplification

The Crown XLS2002 provides flexible output power for a variety of professional low-impedance loudspeaker systems.

Its published power ratings include:

  • 1,050W per channel at 2Ω
  • 650W per channel at 4Ω
  • 375W per channel at 8Ω
  • 2,100W bridged at 4Ω
  • 1,300W bridged at 8Ω

These output options allow users to configure the amplifier for compatible full-range loudspeakers, passive subwoofers, and other professional speaker systems.

Bridged operation combines the amplifier's two channels to provide greater output power for a single appropriately rated loudspeaker load.

Efficient Crown DriveCore 2 Technology

The XLS2002 incorporates Crown's DriveCore 2 Class D amplifier technology.

This efficient amplifier design provides substantial power while maintaining a lightweight and compact chassis.

For DJs, musicians, and installation professionals, reduced amplifier weight simplifies transportation and equipment rack planning.

Integrated PureBand Crossover System

The Crown XLS2002 includes built-in crossover processing that allows users to control the frequency range delivered to connected loudspeakers.

Available filtering options include:

  • High-pass filtering
  • Low-pass filtering
  • Band-pass filtering

High-pass filtering can help reduce unwanted low-frequency content reaching compatible full-range loudspeakers.

Low-pass filtering can be used when configuring the amplifier for appropriately matched passive subwoofer applications.

Band-pass filtering provides additional control when a loudspeaker should operate within a selected frequency range.

Crown Peakx Loudspeaker Protection

The XLS2002 features Crown Peakx limiters to help control excessive amplifier output.

These limiters provide additional protection for connected loudspeakers during demanding sound reinforcement applications.

Correct amplifier gain, loudspeaker power ratings, and system configuration remain important for reliable operation.

Flexible Professional Audio Inputs

The amplifier supports several common audio input formats, allowing integration with a wide range of sound equipment.

Available connections include:

  • Balanced XLR inputs
  • 1/4-inch inputs
  • RCA inputs

This makes the XLS2002 suitable for professional mixers, DJ controllers, audio processors, and other compatible signal sources.

Selectable Input Sensitivity

The XLS2002 provides selectable input sensitivity settings of:

  • 0.775Vrms
  • 1.4Vrms

These options allow users to match amplifier sensitivity to the output characteristics of their audio equipment.

Proper input sensitivity selection helps establish appropriate gain structure and minimize unwanted noise.

Professional Loudspeaker Outputs

The amplifier includes Speakon and binding-post speaker connections.

These output options accommodate common professional loudspeaker wiring methods for compatible passive speaker systems.

Large Front-Panel LCD

The Crown XLS2002 features an enlarged LCD display that simplifies amplifier configuration.

Users can access supported crossover settings, input sensitivity, and other operating functions directly from the front panel.

The clear display is particularly helpful when configuring amplifier racks during system setup.

Adjustable Front-Panel Lighting

For theaters, clubs, and other low-light environments, the XLS2002 allows most front-panel LED indicators to be disabled.

Essential clip and thermal indicators remain active to provide important operating information.

This helps reduce distracting equipment lighting during performances.

Automatic Sleep Mode

The amplifier includes configurable sleep functionality to reduce unnecessary power consumption during periods of inactivity.

A remote power trigger provides additional flexibility for compatible equipment installations.

Menu Security and Factory Reset

The XLS2002 includes a front-panel security feature that helps prevent unauthorized changes to amplifier settings.

This is useful in permanent installations where maintaining the approved system configuration is important.

A factory reset option allows users to restore default settings when necessary.

Efficient Forced-Air Cooling

The amplifier uses forced-air cooling to help maintain appropriate operating temperatures.

This supports reliable performance during extended operation when the amplifier is installed with proper ventilation.

Lightweight 2RU Rackmount Construction

The XLS2002 combines substantial amplifier power with a compact chassis.

Measuring 19 inches wide, 3.5 inches high, and 10.7 inches deep, it fits standard professional equipment racks.

Its 10.8-pound weight makes it practical for portable PA racks and permanent audio installations.

Key Features

  • Professional two-channel Crown power amplifier
  • Crown DriveCore 2 Class D technology
  • 1,050W per channel at 2Ω
  • 650W per channel at 4Ω
  • 375W per channel at 8Ω
  • 2,100W bridged at 4Ω
  • 1,300W bridged at 8Ω
  • Stereo and bridged operating configurations
  • Integrated Crown PureBand crossover system
  • High-pass, low-pass, and band-pass filtering
  • Crown Peakx output limiters
  • Selectable 0.775V and 1.4V input sensitivity
  • Balanced XLR inputs
  • 1/4-inch audio inputs
  • RCA audio inputs
  • Speakon loudspeaker outputs
  • Binding-post loudspeaker outputs
  • Large front-panel LCD
  • Adjustable LED indicator lighting
  • Configurable automatic sleep mode
  • Remote power trigger
  • Menu security lockout
  • Factory reset capability
  • Efficient forced-air cooling
  • Signal-to-noise ratio greater than 103 dB at 1.4V sensitivity
  • Total harmonic distortion below 0.5%
  • Damping factor greater than 200
  • Lightweight 10.8 lb construction
  • Standard 2RU rackmount design

Ideal Applications

DJ and Mobile Sound Systems

The Crown XLS2002 provides substantial output power for mobile DJs using compatible passive PA loudspeakers.

Its lightweight construction simplifies transportation, while the integrated crossover and limiting functions provide useful system control.

Live Bands and Performance Venues

Musicians, sound engineers, and small to medium-sized venues can use the XLS2002 to power properly matched passive loudspeaker systems.

Its flexible output configurations accommodate different sound reinforcement requirements.

Passive Subwoofer Systems

The XLS2002 can be configured for compatible passive subwoofer applications using its integrated low-pass filtering.

Bridged operation provides additional output capability when connected to an appropriately rated subwoofer load.

Houses of Worship

Churches and worship facilities can use the XLS2002 in professionally designed sound reinforcement systems requiring dependable two-channel amplification.

School Auditoriums and Multipurpose Rooms

The amplifier is suitable for educational facilities using compatible passive loudspeakers for presentations, assemblies, and performances.

Bars and Entertainment Venues

The XLS2002 provides a practical amplification solution for low-impedance loudspeaker systems in clubs, bars, and entertainment facilities.

Home Audio Systems

Audio enthusiasts can use the XLS2002 with compatible passive loudspeakers where professional amplifier output power and flexible input connectivity are desired.

Crown XLS2002 Technical Specifications

Specification Details
Manufacturer Crown Audio
Model XLS2002 / XLS 2002
Series XLS DriveCore 2
Amplifier Type Two-channel power amplifier
Amplifier Technology Class D / DriveCore 2
Output Channels 2
Power at 2Ω Stereo 1,050W per channel
Power at 4Ω Stereo 650W per channel
Power at 8Ω Stereo 375W per channel
Power at 4Ω Bridged 2,100W
Power at 8Ω Bridged 1,300W
Input Sensitivity Selectable 0.775Vrms / 1.4Vrms
Frequency Response +0 dB, −1 dB at 1W, 20 Hz–20 kHz
Signal-to-Noise Ratio Greater than 103 dB at 1.4V sensitivity
Total Harmonic Distortion Less than 0.5%
Intermodulation Distortion Less than 0.3%
Damping Factor Greater than 200
Crosstalk at 1 kHz Greater than 85 dB
Crosstalk at 20 kHz Greater than 55 dB
Audio Inputs XLR, 1/4-inch, RCA
Speaker Outputs Speakon and binding posts
Crossover Crown PureBand
Filtering High-pass, low-pass, band-pass
Output Limiting Crown Peakx
Front-Panel Interface LCD display
Display Lighting Adjustable
Sleep Mode Configurable
Remote Power Trigger Supported
Menu Security Supported
Factory Reset Supported
Cooling Forced-air
Rack Height 2RU
Width 19 inches (48.3 cm)
Height 3.5 inches (8.9 cm)
Depth 10.7 inches (27.2 cm)
Net Weight 10.8 lbs (4.9 kg)

Published amplifier output ratings are based on Crown's specified test conditions. Actual output depends on loudspeaker impedance, operating mode, and system conditions.

Installation and Compatibility

The Crown XLS2002 is designed for use with compatible passive low-impedance loudspeakers.

The amplifier supports stereo operation with 2Ω, 4Ω, and 8Ω loads, along with bridged operation for appropriately configured 4Ω and 8Ω loads.

Before connecting speakers, verify the loudspeaker impedance, power handling, amplifier operating mode, and required headroom.

The integrated PureBand crossover system provides frequency filtering for compatible full-range speakers and passive subwoofers.

Crown Peakx limiters offer additional output management to help protect connected loudspeakers.

The amplifier accepts XLR, 1/4-inch, and RCA inputs, making it compatible with a variety of professional audio sources.

Speakon and binding-post outputs provide flexible speaker connection options.

The XLS2002 should be installed with appropriate ventilation for its forced-air cooling system. Electrical circuit capacity must also be evaluated according to the amplifier's operating requirements.

Need More Amplifier Power?

For applications requiring additional output power, consider the Crown XLS2502 DriveCore 2 Power Amplifier. It delivers 775 watts per channel at 4 ohms and up to 2,400 watts in bridged 4-ohm operation, making it a useful upgrade for compatible high-output PA speakers and passive subwoofers.

Why Buy the Crown XLS2002 from Audio Supply?

Audio Supply offers professional Crown amplifiers and sound reinforcement equipment for DJs, live venues, and commercial installations. The XLS2002 combines powerful DriveCore 2 amplification, integrated crossover processing, and lightweight construction for versatile passive loudspeaker systems.

List price: $990.00
Price: $795.00