The dbx 234s is a professional analog crossover designed to improve the performance of multi-amplifier loudspeaker systems. Supporting stereo 2-way, stereo 3-way, and mono 4-way operation, it provides flexible frequency management for live sound reinforcement, DJ systems, touring applications, and permanent audio installations.

Using precision 24 dB/octave Linkwitz-Riley filters, the dbx 234s divides a line-level audio signal into separate frequency bands for low-, mid-, and high-frequency loudspeaker sections. This allows each amplifier and speaker section to reproduce its intended frequency range, helping improve system clarity and reduce unwanted frequency overlap.

The 234s features independent output level controls, selectable crossover frequency ranges, output polarity reversal, and a switchable 40 Hz low-cut filter. An optional low-frequency summing function also supports systems requiring a mono subwoofer signal.

Professional balanced 1/4-inch TRS connections, clearly labeled controls, and a compact 1RU rackmount chassis make the dbx 234s a practical solution for both portable and installed sound systems.

Features & Benefits

Flexible 2-Way, 3-Way, and 4-Way Operation

The dbx 234s supports three crossover configurations:

  • Stereo 2-Way: Separates left and right signals into low- and high-frequency outputs.
  • Stereo 3-Way: Divides each stereo channel into low-, mid-, and high-frequency outputs.
  • Mono 4-Way: Separates a mono signal into four frequency bands for more complex loudspeaker systems.

These operating modes provide flexibility for different active loudspeaker configurations.

24 dB/Octave Linkwitz-Riley Filters

The 234s uses Linkwitz-Riley crossover filters with 24 dB/octave slopes. These filters provide controlled frequency separation between connected loudspeaker sections.

Proper crossover configuration helps reduce unnecessary frequency overlap and supports smoother system integration.

Adjustable Crossover Frequencies

Selectable x1 and x10 frequency ranges allow technicians to configure crossover points for different loudspeaker requirements.

The adjustable low-frequency crossover range extends from 45 Hz to 960 Hz, or from 450 Hz to 9.6 kHz when the x10 setting is engaged.

Other crossover frequency controls provide adjustment up to 9.6 kHz, depending on the selected operating mode.

Independent Output Level and Polarity Controls

Individual output level controls allow technicians to balance the relative levels of connected loudspeaker sections.

Each output also includes a polarity inversion switch, providing additional flexibility when aligning the system.

40 Hz Low-Cut Filter

The switchable 40 Hz Butterworth high-pass filter provides a 12 dB/octave slope to help reduce unwanted low-frequency energy.

This feature can be useful when protecting compatible loudspeakers from frequencies below their intended operating range.

Mono-Summed Subwoofer Output

The optional LF Sum function combines low-frequency information for mono subwoofer operation.

This allows the 234s to accommodate systems using a shared subwoofer channel rather than separate left and right low-frequency outputs.

Professional Balanced Connections

The dbx 234s features electronically balanced/unbalanced 1/4-inch TRS inputs and impedance-balanced/unbalanced outputs.

RF filtering helps reduce susceptibility to interference, while status LEDs provide visual confirmation of selected operating functions.

Key Features

  • Stereo 2-way, stereo 3-way, and mono 4-way operation
  • 24 dB/octave Linkwitz-Riley crossover filters
  • Adjustable crossover frequency controls
  • x10 crossover frequency range switches
  • Independent output level controls
  • Polarity inversion on every output
  • Switchable 40 Hz Butterworth low-cut filters
  • Optional mono-summed low-frequency output
  • Balanced 1/4-inch TRS inputs and outputs
  • Stereo/mono and function status LEDs
  • Dynamic range greater than 106 dB
  • Compact 1RU rackmount construction

Ideal Applications

The dbx 234s is suitable for professional sound systems requiring active frequency management, including:

  • Live bands and touring PA systems
  • DJ and mobile sound reinforcement
  • Houses of worship
  • Theater and auditorium installations
  • Multi-amplifier loudspeaker systems
  • Active subwoofer and full-range speaker configurations

dbx 234s Technical Specifications

Specification Details
Manufacturer dbx Professional
Model 234s
Product Type Analog Active Crossover
Operating Modes Stereo 2-way, stereo 3-way, mono 4-way
Input Connectors 1/4" TRS
Input Type Electronically balanced/unbalanced, RF filtered
Input Impedance Greater than 50kΩ balanced; greater than 25kΩ unbalanced
Maximum Input Level Greater than +22 dBu
CMRR Greater than 40 dB; typically greater than 55 dB at 1 kHz
Output Connectors 1/4" TRS
Output Type Impedance-balanced/unbalanced, RF filtered
Output Impedance 200Ω balanced; 100Ω unbalanced
Maximum Output Level Greater than +21 dBu into 2kΩ or greater
Bandwidth 20 Hz–20 kHz, ±0.5 dB
Frequency Response Below 3 Hz to above 90 kHz, +0/−3 dB
Dynamic Range Greater than 106 dB, unweighted
THD + Noise Less than 0.004% at +4 dBu, 1 kHz; less than 0.04% at +20 dBu, 1 kHz
Interchannel Crosstalk Less than −80 dB, 20 Hz–20 kHz
Stereo Low/High or Low/Mid Crossover 45–960 Hz or 450 Hz–9.6 kHz with x10
Stereo Mid/High Crossover 450 Hz–9.6 kHz
Mono Low/Low-Mid Crossover 45–960 Hz or 450 Hz–9.6 kHz with x10
Mono Low-Mid/High-Mid Crossover 450 Hz–9.6 kHz
Mono High-Mid/High Crossover 450 Hz–9.6 kHz
Crossover Filter Type Linkwitz-Riley, 24 dB/octave
Low-Cut Filter 40 Hz Butterworth, 12 dB/octave
Output Polarity Individually switchable
LF Sum Selectable mono low-frequency summing
Stereo SNR Greater than 94 dB low; 93 dB mid; 90 dB high
Mono SNR Greater than 94 dB low and low-mid; 92 dB high-mid; 88 dB high
Operating Voltage Region-specific 100V, 120V, or 230V AC versions
Operating Temperature 32°F–113°F (0°C–45°C)
Power Consumption 15W
Power Connector IEC receptacle
Rack Height 1RU
Dimensions 19"W × 1.75"H × 6.9"D
Net Weight 4.0 lbs (1.8 kg)
Shipping Weight 5.8 lbs (2.6 kg)

Installation and Compatibility

The dbx 234s is designed for professional line-level audio systems using separate amplifier channels for different loudspeaker frequency bands.

Connect the crossover between a compatible mixer or audio processor and the power amplifiers feeding the appropriate loudspeaker sections.

Select the correct operating mode, crossover frequencies, and output levels according to the connected loudspeaker specifications.

Important: The dbx 234s is a signal processor, not a power amplifier. It does not directly power passive loudspeakers.

Need XLR Connections?

For installations that prefer balanced XLR connections, consider the dbx 234xs Stereo 2/3-Way and Mono 4-Way Crossover. It offers similar crossover flexibility, including 24 dB/octave Linkwitz-Riley filters, independent output level controls, and multiple operating modes, with XLR inputs and outputs instead of 1/4-inch TRS connections.

Why Buy the dbx 234s from Audio Supply?

Audio Supply offers professional dbx signal processing equipment for live sound and installed audio systems. The dbx 234s provides flexible crossover configuration, precise analog filtering, and straightforward controls for multi-amplifier loudspeaker applications.

List price: $410.00
Price: $330.00