SoundTube WLL-RX1P-II Tri-band Uncompressed Wireless Receiver

The SoundTube WLL-RX1P-II wireless receiver unit contains a 2-channel 50W/ch Class D amplifier which will power up to two speakers. An additional 5 receivers (for a total of 6) may be ordered to accompany a single transmitter. Two additional transmitters can be used with separate frequencies with a total of up to 18 receiver units. Each transmitter/receiver contains 3 RF channels to minimize interference from other devices. Each channel contains 3 bands, alternating between them to preemptively counteract interference, keeping the signal clear and latency less than 20ms. Receiver output options include Push-On phoenix connectors or 1/4" connections. The SoundTube WLL-RX1P-II also includes stereo line output for connecting auxiliary audio components. A Local Audio source may also be used at the receiver via stereo mini which mutes the wireless signal when connected.

SoundTube WLL-RX1P-II Features

3 RF channels to minimize interference from other devices. • Each band contains 3 channels, alternating between them to preemptively counteract interference, keeping the signal clear and latency less than 20 ms. • Uncompressed 2-channel audio for maximum fidelity. • Multiple receiver/amplifier units may be used with a single transmitter. • Up to 6 receivers may be used for each transmitter. For more than 6, use an additional transmitter on another frequency. • USB, stereo mini or 1/4” balanced input connections at the transmitter. • Push-On or 1/4” connections speaker level outputs at the receiver. Also includes stereo line output for connecting auxiliary audio components, such as ADA (Americans with Disabilities Act) adapters. • Local Audio source at the receiver via stereo mini (mutes the wireless signal when connected). • High/Low power selector switch on transmitter limits RF range where needed.

SoundTube WLL-RX1P-II Specs