The Shure UA505-RSMA Remote Antenna Mounting Bracket Kit lets you mount an antenna away from the receiver or equipment rack.
NOTE: Antennas and bracket mounting hardware (screws, washers and nuts) are not included in this kit.
Wall bracket dimensions: 84.52 x 63.5 x 77.02 mm (H x W x D)
UA505-RSMA Included Components
|
Reverse SMA Bulkhead Adapters, lockwasher, nut
|
95A32436
|
|
Remote Antenna Mounting Bracket Kit
|
UA505-RSMA
|
|
6" Reverse SMA Cable
|
95F31216
|
UA505-RSMA Remote Antenna Placement
Follow these guidelines when mounting antennas remotely:
-
Reduce distance between transmitter and antenna.
-
Mount antennas farther from each other to improve performance.
-
Position antennas so there is nothing obstructing the line of sight to the transmitter, including the audience.
-
Keep antennas away from metal objects and any other antennas.
-
Use only low-loss reverse SMA cable to avoid poor RF signal.
-
Consult cable's specifications and calculate signal loss for desired cable run.
-
Use one continuous length of cable from the antenna to the receiver to increase signal reliability.
-
Always perform a walk-around test to verify coverage before using a wireless system during a speech or performance. Experiment with antenna placement to find the optimum location. If necessary, mark any trouble spots and ask presenters or performers to avoid those areas.
