The ADX10FLP is a cardioid condenser flute microphone that utilizes a uniformly controlled cardioid polar pattern. This feature assists in isolating the miked sound at the embouchure hole from other instruments or vocals on stage. With a smooth and accurate frequency range of 50 Hz-18 kHz, the ADX10FLP is lightweight, low profile, and furnishes the flutist’s natural sound with an exceptional transient response.
The ADX10FLP, specifically for use with a standard flute, includes a clip (attaches to the head joint), an 8′ cable terminating to a mini XLR-f connector, and a phantom power adapter (APS911). Other model versions include the ADX10FL for use with Audix wireless systems.
Manufactured to high standards and tight tolerances, the ADX10FLP miniaturized condenser flute mic features a modular threaded capsule, machined brass body with a matte black finish, high quality shielded microphone cable and a variety of optional accessories.
Audix ADX10FLP Features
Miniature condenser flute microphone . Natural, accurate sound reproduction . May be used wired or with RAD360 Wireless System . Designed, assembled & tested in the USA . 3 year warranty
Audix ADX10FLPSpecifications
| Transducer Type |
Pre-polarized Condenser |
| Frequency Response |
50 Hz – 18 kHz |
| Polar Pattern |
Cardioid |
| Output Impedance |
250 ohms |
| Sensitivity |
4.5 mV / Pa @ 1k |
| Signal to Noise Ratio |
>65 dB |
| Equivalent Noise Ratio |
<29 dB (A-weighted) |
| Maximum SPL |
≥120 dB |
| Power Requirements |
5-52V phantom |
| Connector |
Shielded 3’ terminating to a minature 3 pin XLRf |
| Polarity |
Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 |
| Materials / Finish |
Machined brass capsule / Black finish |
| Weight |
110 g / 4 oz |
| Length |
25 mm / 0.98 in |
