The Audix f2 Dynamic Instrument Microphone is an affordable professional microphone designed for capturing drums, percussion, guitar amplifiers, and brass instruments in live sound and studio applications. Part of the Audix Fusion Series, the f2 combines a focused hypercardioid pickup pattern, punchy mid-bass response, and rugged construction in a compact, easy-to-position design.
Equipped with Audix's LM (Low Mass) Type A diaphragm, the f2 delivers natural instrument reproduction with clear attack and controlled low-midrange response. Its frequency range of 52Hz–15kHz makes it particularly effective for rack toms, floor toms, congas, saxophones, and amplified instruments.
The hypercardioid pickup pattern helps isolate the instrument from nearby sound sources, reducing unwanted drum and cymbal bleed during live performances and multitrack recording. With maximum SPL handling of at least 139dB, the f2 can be positioned close to loud drums and instrument cabinets.
Designed, assembled, and tested by Audix in the USA, the f2 features a precision-cast zinc alloy body, durable black E-coat finish, steel mesh grille, and gold-plated XLR connector. Its balanced, transformerless output supports dependable performance with professional microphone cables.
Features and Benefits
LM Type A Diaphragm for Natural Instrument Reproduction
The Audix f2 uses Low Mass diaphragm technology to capture instrument attack and tonal detail with a full, punchy mid-bass character.
This makes it especially suitable for percussion instruments that require both body and definition.
Hypercardioid Pickup Pattern for Improved Isolation
The f2 features a focused hypercardioid polar pattern with greater than 20dB off-axis rejection.
This helps reduce unwanted sound from adjacent drums, cymbals, monitors, and amplifiers, making it useful for close-miking in crowded stage and studio environments.
Optimized for Rack Toms, Floor Toms, and Congas
With a 52Hz–15kHz frequency response, the f2 captures the attack and resonance of toms and hand percussion.
Its tonal character provides a useful balance of low-midrange body and high-frequency articulation for live mixing and recording.
Handles High Sound Pressure Levels
The f2 handles sound pressure levels of at least 139dB SPL, allowing close placement near powerful drums, brass instruments, and guitar cabinets.
Its dynamic capsule requires no batteries or phantom power.
Compact Design for Flexible Placement
Measuring approximately 4.09 inches long, the f2 fits conveniently around drum kits and amplifier setups.
Its compact construction makes positioning easier where microphone stands, cymbals, and drum hardware compete for space.
Balanced, Transformerless XLR Output
The f2 features a low-impedance, balanced output designed to help minimize interference during professional audio transmission.
Its gold-plated 3-pin male XLR connector provides a reliable connection to compatible microphone cables, mixers, and recording interfaces.
Durable Construction for Stage and Studio
A cast zinc alloy body, protective steel mesh grille, and black E-coat finish help the f2 withstand regular handling and performance use.
The microphone is backed by a three-year Audix manufacturer warranty.
Audix f2 Key Features
- Affordable dynamic instrument microphone for live sound and studio recording
- Hypercardioid polar pattern for focused pickup and reduced instrument bleed
- Audix LM Type A Low Mass diaphragm
- Punchy mid-bass response with natural instrument detail
- 52Hz–15kHz frequency response
- Handles sound pressure levels of at least 139dB SPL
- Greater than 20dB off-axis rejection
- Ideal for rack toms, floor toms, congas, brass, and guitar cabinets
- Compact body for convenient close-miking
- Transformerless, low-impedance balanced output
- No phantom power or batteries required
- Rugged cast zinc alloy housing
- Durable black E-coat finish
- Steel mesh grille and gold-plated XLR connector
- Includes DCLIP microphone clip and P1 carrying pouch
- Designed, assembled, and tested by Audix in the USA
- Three-year manufacturer warranty
Audix f2 Audio Specifications
| Specification | Details |
|---|
| Transducer Type | Dynamic |
| Capsule Technology | LM Type A |
| Polar Pattern | Hypercardioid |
| Frequency Response | 52Hz–15kHz |
| Output Impedance | 580 Ohms |
| Sensitivity | 2mV/Pa at 1kHz |
| Maximum SPL | ≥139dB |
| Off-Axis Rejection | Greater Than 20dB |
| Power Requirements | None |
| Output Design | Balanced, Transformerless |
Audix f2 Technical Specifications
| Specification | Details |
|---|
| Manufacturer | Audix |
| Model | f2 |
| Series | Fusion |
| Product Type | Dynamic Instrument Microphone |
| Connector | 3-Pin Male XLR |
| Polarity | Positive Pressure Produces Positive Voltage on Pin 2 Relative to Pin 3 |
| Body Material | Cast Zinc Alloy |
| Finish | Black E-Coat |
| Grille | Steel Mesh |
| Length | 104mm / 4.09 Inches |
| Weight | 247g / Approximately 8.7oz |
| Included Accessories | DCLIP Microphone Clip, P1 Carrying Pouch |
| Warranty | 3 Years |
Recommended Applications
Rack Toms: Captures punchy attack and mid-bass definition while reducing bleed from nearby cymbals and drums.
Floor Toms: Reproduces the body and resonance of larger toms for live performance and recording.
Congas and Hand Percussion: Provides detailed transient capture and natural low-midrange response.
Guitar Cabinets: Captures amplified guitar tone with focused pickup and controlled background rejection.
Bass Cabinets: Useful for capturing midrange articulation and attack from amplified bass instruments.
Saxophones and Brass: Handles high sound levels while helping isolate individual instruments from surrounding stage noise.
Home Recording Studios: Offers an economical professional microphone for recording drums and amplified instruments.
Need a Compatible Drum Microphone Mount?
The Audix f2 includes a DCLIP microphone clip for standard microphone stand mounting.
For additional mounting flexibility, compatible Audix accessories include:
- Audix DVICE: Flexible mini-gooseneck rim clamp for mounting microphones directly to compatible drums.
- Audix DFLEX: Dual-pivot rim clamp for adjustable drum microphone placement.
- Audix DCLAMP: Flexible mini-gooseneck mount that attaches to a drum tension lug.
- Audix CBL20: 20-foot balanced XLR microphone cable for connecting the f2 to a mixer or audio interface.
These accessories can help simplify microphone positioning and reduce stand clutter around a drum kit.
Why Buy the Audix f2 from Audio Supply?
Audio Supply offers professional Audix microphones and accessories for live sound, recording studios, schools, and commercial audio applications. The Audix f2 combines focused instrument pickup, durable construction, and affordable professional performance for drums, percussion, and amplified instruments.
