The M70 is an innovative flush mount condenser microphone designed for distance miking. Features include a fully integrated preamp, an extremely high sensitivity rating of 38 millivolts and a small footprint of only 3 inches in diameter. The M70 applications include video conferencing, distance learning, hospital rooms, surveillance and ambient room miking. The M70 offers a flush mount solution, easy installation and allows the microphone to completely disappear from view without sacrificing sound quality. The M70 capsule is housed within a patented cradle that enables the microphone to be aimed and focused up to an angle of 45 degrees towards the sound source. In addition, the M70 has complete immunity from RF interference caused by cell phones and GSM devices. The M70 terminates in a terminal block connector and is easy to install, requiring just a 2 inch hole to be drilled with no additional tools. The M70 comes in stock white and is also available in a satin nickel finish.
Audix M70 Features
High output for distance miking · Immunity from RF interference · Miniaturized integrated preamp circuitry · 12 mm gold vapor diaphragm · Includes plenum rated box · No external power adaptor · Point and shoot directivity · Designed, assembled & tested in the USA · 3 year warranty
Applications
Video Conferencing · Distance Learning · Surveillance · Hospital and Medical Procedures · Ambient Room Miking
Audix M70 Specifications
| Transducer Type |
Condenser |
| Frequency Response |
60 Hz – 10 kHz |
| Polar Pattern |
Cardioid |
| Output Impedance |
150 ohms |
| Sensitivity |
38 mV / Pa @ 1k |
| Equivalent Noise Level |
22 dB |
| Signal to Noise Ratio |
72 dB |
| Maximum SPL |
≥130 dB |
| Dynamic Range |
108 dB |
| Power Requirements |
18 – 52 V phantom |
| Connector |
3-pin Phoenix fe |
| Polarity |
Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector |
| Materials / Finish |
Brass, Aluminum and Steel White or Nickel |
| Recommended Cable |
Belden 9451 P or 82761 |
| Length |
176 mm / 6.9 in |
