The Community ALC-1604D is a professional four-channel amplified loudspeaker controller combining high-power Class D amplification, advanced digital signal processing, Dante audio networking, and comprehensive loudspeaker protection. Designed for use with Community Professional Loudspeakers, the ALC-1604D provides an integrated solution for amplification, system tuning, audio routing, and remote monitoring in demanding commercial sound installations.

Each of the four amplifier channels can deliver up to 1,600 watts, depending on the connected load and operating configuration. The amplifier's intelligent Power Sharing technology distributes available power across the outputs, supporting systems with different loudspeaker requirements while managing a total shared power capacity of up to 4,800 watts.

The ALC-1604D supports low-impedance 2-ohm, 4-ohm, and 8-ohm loudspeakers as well as 70V and 100V distributed speaker systems. Selectable output configurations, including bridged operation, provide flexibility for high-output loudspeakers, distributed audio zones, and complex installed sound systems.

Integrated DSP processing includes FIR and IIR filtering, equalization, crossovers, delay, and advanced limiting. Factory-developed Community loudspeaker presets provide optimized settings for compatible loudspeaker models, helping installers achieve consistent performance while protecting connected equipment.

Four analog input channels and four Dante network audio channels provide flexible integration with professional audio systems. Dante connectivity allows multichannel digital audio to be transported over a compatible Ethernet network, reducing the need for extensive analog cabling.

Using ArmoníaPlus System Manager software, technicians can configure amplifier settings, manage audio routing, apply loudspeaker presets, and monitor system performance remotely.

The ALC-1604D also incorporates per-channel fault reporting, GPIO connections, and a power supply designed for operation with compatible UPS systems. These features support integration into installations where continuous monitoring and system reliability are important.

Ideal for theaters, houses of worship, performance venues, stadiums, schools, and large commercial facilities, the Community ALC-1604D delivers powerful amplification and advanced loudspeaker management in one professional system component.

Features & Benefits

Four Channels of High-Power Amplification

The Community ALC-1604D provides four independently configurable amplifier output channels, each capable of delivering up to 1,600W under specified operating conditions.

Its Power Sharing architecture intelligently manages the amplifier's available output capacity, allowing power to be distributed across channels according to system requirements.

This is particularly useful in installations combining high-output loudspeakers, subwoofers, and distributed audio zones.

Low-Impedance and Constant-Voltage Speaker Compatibility

Each channel supports compatible 2Ω, 4Ω, or 8Ω loudspeaker loads, as well as 70V and 100V distributed speaker lines.

Selectable configurations allow the amplifier to accommodate different loudspeaker types within the same system.

Bridgeable channel pairs provide additional flexibility for demanding high-power applications.

Advanced FIR and IIR DSP Processing

The integrated DSP provides extensive signal processing capabilities for professional loudspeaker management.

Available functions include linear-phase FIR filtering, parametric equalization, crossover filters, signal delay, and configurable routing.

These tools help optimize loudspeaker performance, improve system integration, and support accurate tuning in acoustically challenging environments.

Factory-Optimized Community Loudspeaker Presets

Manufacturer-developed loudspeaker presets provide model-specific equalization, high-pass filtering, crossover settings, and protective limiting.

Using the appropriate presets helps achieve consistent audio performance while maintaining operating limits suited to compatible Community loudspeakers.

Dante Digital Audio Networking

The ALC-1604D incorporates four-channel Dante audio input capability for integration with compatible networked audio systems.

Dante enables digital audio distribution over standard network infrastructure, making the amplifier suitable for installations with centralized processing, multiple equipment locations, and extensive audio routing requirements.

Four Analog Audio Inputs

Four analog input channels provide connectivity for conventional professional audio systems.

The combination of analog and Dante connectivity allows the ALC-1604D to accommodate both traditional and networked audio architectures.

ArmoníaPlus Remote Control and Monitoring

ArmoníaPlus System Manager software provides centralized amplifier configuration, DSP adjustment, loudspeaker preset management, and system monitoring.

Installers can manage amplifier settings and monitor operating conditions through the control network, reducing the need for direct access to individual equipment racks.

Intelligent Power Sharing

Power Sharing technology allows the amplifier's available output power to be allocated asymmetrically across channels.

The system monitors both individual channel power and total amplifier power, applying appropriate limits to maintain safe operation.

This provides flexibility for installations where connected loudspeakers have different power requirements.

Advanced Loudspeaker Protection

Integrated protection functions include TruePower limiting, RMS voltage limiting, RMS current limiting, and peak limiting.

These functions help protect compatible loudspeakers from excessive power and potentially damaging operating conditions.

Additional amplifier monitoring supports reliable performance in demanding applications.

GPIO Fault Monitoring

Rear-panel general-purpose input/output connections support integration with compatible external monitoring and control equipment.

Configurable fault-reporting functions help system operators identify abnormal operating conditions.

UPS-Compatible Power Supply

The amplifier's power supply is engineered to support operation with appropriately specified uninterruptible power supplies.

This can be useful in applications where maintaining amplifier operation during interruptions to normal AC power is important.

UPS compatibility and fault monitoring do not independently establish certification for emergency voice evacuation or fire-alarm use. Any life-safety application requires verification against the applicable system standards and approvals.

Energy-Saving Operation

Selectable energy-saving functionality reduces amplifier power consumption when no audio activity is detected.

This helps improve operating efficiency in commercial installations with extended periods of inactivity.

Key Features

  • Four-channel professional amplified loudspeaker controller
  • Up to 1,600W output per channel, depending on load
  • Up to 4,800W total shared amplifier power
  • Intelligent Power Sharing technology
  • Class D amplifier design
  • Supports 2Ω, 4Ω, and 8Ω loudspeakers
  • Supports 70V and 100V distributed speaker systems
  • Bridgeable amplifier channel pairs
  • Four analog audio input channels
  • Four-channel Dante digital audio input capability
  • Advanced FIR and IIR DSP processing
  • Linear-phase crossover and filtering capabilities
  • Manufacturer-optimized Community loudspeaker presets
  • Parametric equalization and signal delay
  • Configurable audio routing and input matrix
  • TruePower, RMS voltage, RMS current, and peak limiting
  • Remote configuration through ArmoníaPlus software
  • Ethernet-based system monitoring
  • Per-channel fault reporting
  • Rear-panel GPIO connections
  • UPS-compatible power supply design
  • Energy-saving operating mode
  • Professional rack-mount construction
  • Four-year manufacturer limited warranty for new units, subject to Biamp's terms

Applications

Houses of Worship

Power compatible Community loudspeaker systems for worship services, music performances, and speech reinforcement.

Theaters and Performing Arts Centers

Provide high-output amplification, loudspeaker processing, and system monitoring for installed performance sound systems.

Stadiums and Sports Facilities

Support demanding loudspeaker installations requiring substantial power, flexible routing, and centralized system management.

Schools and Auditoriums

Deliver professional amplification and loudspeaker control for assemblies, performances, and multipurpose facilities.

Large Commercial Facilities

Manage distributed loudspeaker systems with configurable audio zones and remote monitoring.

Entertainment and Performance Venues

Power compatible full-range loudspeakers and subwoofers using manufacturer-developed processing presets.

Community ALC-1604D Technical Specifications

Specification Details
Manufacturer Community / Biamp
Model ALC-1604D
Product Type Amplified Loudspeaker Controller
Amplifier Channels 4
Amplifier Topology Class D
Maximum Power at 2Ω 1,600W per channel
Maximum Power at 4Ω 1,400W per channel
Maximum Power at 8Ω 1,250W per channel
Maximum Power at 70V 1,600W per channel
Maximum Power at 100V 1,600W per channel
Maximum Bridged Power at 4Ω 3,200W per bridged pair
Maximum Bridged Power at 8Ω 2,800W per bridged pair
Total Shared Power Up to 4,800W
Analog Input Channels 4
Dante Input Channels 4
Dante Network Capacity 4 × 4 channels
DSP Processing FIR and IIR filtering, EQ, crossover, delay
Input DSP Delay Up to 2 seconds
Output DSP Delay Up to 100 ms
DSP Architecture Latency 2.5 ms fixed
Audio Routing 4 × 4 input matrix
Loudspeaker Presets Community/Biamp manufacturer-developed library
Protection Limiters TruePower, RMS voltage, RMS current, peak
Control Software ArmoníaPlus System Manager
Remote Monitoring Ethernet
Fault Monitoring GPIO and amplifier status monitoring
Power Supply Universal switch-mode with power factor correction
AC Input 100–240V nominal, 50/60 Hz
Cooling Variable-speed forced-air fan
Airflow Front to rear
Energy Saving Selectable
Warranty 4 years for new Community ALC products, subject to warranty terms

Installation and Loudspeaker Compatibility

The Community ALC-1604D is intended for professional installed sound systems using compatible Community loudspeakers and other appropriately specified loudspeaker loads.

Each amplifier channel can be configured for low-impedance or constant-voltage operation according to the system design.

When using distributed 70V or 100V loudspeakers, installers must account for the total connected speaker load and the amplifier's available shared power capacity.

For high-output loudspeaker applications, bridged configurations may provide additional power when supported by the selected load and manufacturer specifications.

Community loudspeaker presets should be selected for the exact connected models. These presets include processing and protection settings intended to optimize system performance.

Dante audio networking and ArmoníaPlus control require appropriate network configuration, compatible software, and professional commissioning.

Installers should provide adequate rack ventilation and follow the manufacturer's electrical, network, and loudspeaker wiring requirements.

Why Buy the Community ALC-1604D from Audio Supply?

Audio Supply offers professional Community and Biamp audio equipment for demanding installed sound applications. The ALC-1604D combines high-power amplification, Dante networking, advanced DSP, and manufacturer-optimized loudspeaker control in one professional solution.

 

List price: $6,042.00
Price: $6,042.00