|
Power Source
|
120 V AC, 60 Hz
|
|
Power Consumption
|
150 W
|
|
Rated Output
|
60 W × 2 channels
|
|
Audio Input
|
Max. 8 channels, modular construction (modules optional)
Power amplifier input 1, 2: 0 dB(*1), 10 kΩ, RCA pin jack
|
|
Audio Output
|
Preamplifier output 1, 2: 0 dB(*1), 300 Ω, unbalanced, RCA pin jack
Speaker output 1, 2: 60 W, 83 Ω × 2, BTL output,
removable terminal block (4 pins)
|
|
Module Slot
|
Analog input (slot 1 - 8): -10 dB(*1), 10 kΩ, unbalanced
Digital input (slot 1 - 4): 24 bit/48 kHz
MIX output (slot 1 - 8): -14 dB(*1), 330 Ω (CH 1 prefader output), unbalanced
Digital output (slot 5 - 7): 24 bit/48 kHz
Power supply (slot 1 - 8): +24 V, -24 V, +6 V DC
|
|
Digital Audio Signal Reference Level
|
-20 dBFS
|
|
Power Bandwidth
|
20 Hz - 20 kHz, 0.008 % THD
|
|
Frequency Response
|
Power amplifier section: 20 Hz - 20 kHz, +0, -1 dB
Analog input module to speaker output: 20 Hz - 20 kHz, +1, -3 dB
|
|
Total Harmonic Distortion
|
Power amplifier section: 0.0008 % (22 kHz LPF, 1 kHz, rated power)
Analog input module to speaker output: 0.008 % (22 kHz LPF, 1 kHz, rated power)
|
|
S/N Ratio
|
At Input short, 20 Hz - 20 kHz, set to ALL FLAT or OFF setting
Output volume min.: 90 dB (preamplifier output)
Output volume max.: 61 dB
(preamplifier output, Input 1 volume: 0 dB, Other Inputs: OFF)
Power amplifier section: 110 dB
|
|
Cross Talk
|
64 dB or more (at 20 kHz)
|
|
Tone Control
|
Bass: ±12 dB (at 100 Hz)
Treble: %%p12 dB (at 10 kHz)
|
|
Parametric Equalizer
|
10 bands, Frequency: 20 Hz - 20 kHz, 31 points, Variable range: ±12 dB, Q: 0.3 - 5
|
|
Speaker Equalizer
|
10 (setup software has 30 TOA speaker presets)
|
|
High-pass Filter
|
-12 dB/oct, Variable frequency range: 20 Hz - 20 kHz, 31 points
|
|
Low-pass Filter
|
-12 dB/oct, Variable frequency range: 20 Hz - 20 kHz, 31 points
|
|
Compressor
|
Depth: 1 - 5
|
|
Delay
|
0 - 40 ms (1 ms steps), maximum 40 ms (CH 1 + CH 2), mixer mode only
|
|
Scene/Event Memory
|
32
|
|
Auxiliary Function
|
Key lock function
|
|
Control Input/Output
|
RS-232C(*2), D-sub connector (9 P, female)
Control input: 4 inputs, no-voltage make contact input, open voltage: 3.3 V DC,
short-circuit current: 1 mA or less, removable terminal block (14 pins)
Control output: 4 outputs, open collector output, withstand voltage: 27 V DC,
control current: 50 mA, removable terminal block (14 pins)
Remote volume: 2 channels, connect a 10 kΩ/linear taper variable resistor or
input the DC voltage of 0 to +10 V, removable terminal block (14 pins)
|
|
Operating Temperature
|
-10 ℃ to +40 ℃ (14゜F to 104゜F)
|
|
Operating Humidity
|
35 % to 80 %RH (no condensation)
|
|
Finish
|
Panel: Aluminum, hair-line, black
Case: Surface-treated steel plate, black, paint
|
|
Dimensions
|
420 (W) × 107.6 (H) × 395 (D) mm (16.54" × 4.24" × 15.55")
|
|
Weight
|
9 kg (19.84 lb)
|
|
Accessory
|
Power cord (2 m (6.56 ft)) …1, Rack mounting bracket …2, Bracket mounting screw …4,
Blank panel …7, Blank panel mounting screw …14,
Removable terminal plug (4 pins) …1, Removable terminal plug (14 pins) …1, CD …1
|
