You don’t have to sacrifice space or prohibitivly steep cost to get up to four channels of clean, robust amplifier power.
The half- and one-rack-space size FA Series high-density Class D amps belie their output: Up to 125 W x 4 in a half rack space…up to 250 W x 4 in one rack space!
FA amps fit where others won’t: kiosks, under tables, closets, etc.
FA amplifiers can nestle under conference tables, trade show exhibits, reception area counters and anywhere else a larger amplifier just won’t fit.
FA Series delivers from 250-500W in 1/2RU and 1,000W in 1RU and are great for all those tight-space installs: Under conference tables, behind displays, inside kiosks, even mounted on a wall. No rack? No problem! FA goes where you need it. Of course, mounting hardware is available for rack or surface-mounting where necessary.
This tiny footprint for a 125-watt/ch or 250 watt/ch amp means you can hide them behind big-screen TVs in conferences rooms and hotel lobbys, power BGM in retail spaces who don’t have room for a hefty amp,provide serious audio to a stand-alone kiosk, power an exhibit presenter, small church or conference room.
The possibilities are endless for amps that don’t take up a whole rack space (FA 125.4 and FA 125.2) or deliver 250 watts per channel in one rack space (FA 250.4).
FA Power Sharing feature offers greater flexibility.
A typical 125-watt per channel amp does just that: Delivers up to 125 watts to each channel. The FA Series is far more flexible. The FA-125.2 and FA-125.4 can SHARE between channel pairs…up to a total of 250W total per pair! So you can design a system with a 180W load on one channel and 70W on the other. Or if a single channel only is driven, 250W can be output to drive a heavier load such as subwoofer.
That means a level of flexibility not found in other amps, including opportunities where one amp can replace two. It breaks the time-honored rules that an X-per channel amp can only deliver X per channel from both of its outputs.
ASHLY FA 125.4 FEATURES
- 125W x 2, 125W x4, 250W x 4 with Class D power supplies
- Silent Active Cooling System for noise-free operation with Energy Star compliance
- Front Status LEDs, power switch and level controls (can be disabled for security)
- Remote GPIO for DC Level Control, Standby & Failure mode
- Switchable input sensitivity (-10/+4dB)
- Remote standby polarity & front panel lockout
- Built-in auto DSP functions such as 80Hz High-Pass Filter and Clip Limiter
- 70V and 100V capability
- Extensive protection circuitry
- Front panel power switch and level controls (can be disabled for security)
- USB Port for firmware updates
- 1U rack kit for one FA-250.4, or two FA-125.2s or FA-125.4s side-by-side
- Safety / Compliance: cTUVus, CE, FCC, RoHS
ASHLY FA 125.4 SPEC
| FA Series Model |
Ch. |
Width |
@4Ω/8Ω all chs. driven |
70V |
100V |
| FA-125.2 |
2 |
1/2 19″ |
125W |
125W |
125W |
| FA-125.4 |
4 |
1/2 19″ |
125W |
125W |
125W |
| FA-250.4 |
4 |
1U |
250W |
250W |
250W |
