You don’t have to sacrifice space or prohibitivly steep cost to get up to four channels of clean, robust amplifier power.
The half- and one-rack-space size FA Series high-density Class D amps belie their output: Up to 125 W x 4 in a half rack space…up to 250 W x 4 in one rack space!

FA amps fit where others won’t: kiosks, under tables, closets, etc.

FA amplifiers can nestle under conference tables, trade show exhibits, reception area counters and anywhere else a larger amplifier just won’t fit.

FA Series delivers from 250-500W in 1/2RU and 1,000W in 1RU and are great for all those tight-space installs: Under conference tables, behind displays, inside kiosks, even mounted on a wall. No rack? No problem! FA goes where you need it. Of course, mounting hardware is available for rack or surface-mounting where necessary.

This tiny footprint for a 125-watt/ch or 250 watt/ch amp means you can hide them behind big-screen TVs in conferences rooms and hotel lobbys, power BGM in retail spaces who don’t have room for a hefty amp,provide serious audio to a stand-alone kiosk, power an exhibit presenter, small church or conference room.

The possibilities are endless for amps that don’t take up a whole rack space (FA 125.4 and FA 125.2) or deliver 250 watts per channel in one rack space (FA 250.4).

FA Power Sharing feature offers greater flexibility.

A typical 125-watt per channel amp does just that: Delivers up to 125 watts to each channel. The FA Series is far more flexible. The FA-125.2 and FA-125.4 can SHARE between channel pairs…up to a total of 250W total per pair! So you can design a system with a 180W load on one channel and 70W on the other. Or if a single channel only is driven, 250W can be output to drive a heavier load such as subwoofer.

That means a level of flexibility not found in other amps, including opportunities where one amp can replace two. It breaks the time-honored rules that an X-per channel amp can only deliver X per channel from both of its outputs.

ASHLY FA 250.4 FEATURES 

  • 125W x 2, 125W x4, 250W x 4 with Class D power supplies
  • Silent Active Cooling System for noise-free operation with Energy Star compliance
  • Front Status LEDs, power switch and level controls (can be disabled for security)
  • Remote GPIO for DC Level Control, Standby & Failure mode
  • Switchable input sensitivity (-10/+4dB)
  • Remote standby polarity & front panel lockout
  • Built-in auto DSP functions such as 80Hz High-Pass Filter and Clip Limiter
  • 70V and 100V capability
  • Extensive protection circuitry
  • Front panel power switch and level controls (can be disabled for security)
  • USB Port for firmware updates
  • 1U rack kit for one FA-250.4, or two FA-125.2s or FA-125.4s side-by-side
  • Safety / Compliance: cTUVus, CE, FCC, RoHS

ASHLY FA 250.4 SPEC

FA Series Model Ch. Width @4Ω/8Ω all chs. driven 70V 100V
FA-125.2 2 1/2 19″ 125W 125W 125W
FA-125.4 4 1/2 19″ 125W 125W 125W
FA-250.4 4 1U 250W 250W 250W
List price: $1,499.00
Price: $1,199.00