FURMAN M-8S 15A Standard Power Conditioner with Sequencer

The Furman Merit M-8S Power Sequencer is an ideal, cost-effective AC power management solution for any professional rack-mount audio, video, or broadcast system where safe and orderly power sequencing is essential. Designed for reliability and ease of installation, the M-8S ensures your equipment powers up and shuts down in a controlled sequence to prevent harmful inrush currents and protect sensitive gear.

Simply install the M-8S in the top slot of your rack, and its six delayed, rear-panel outlets—organized into three sequenced banks—will automatically power on in order, delivering clean, consistent power for loads up to 15 amps. Two additional unswitched outlets (rear) and one front convenience outlet allow always-on operation for critical devices.

FURMAN M-8S  Key Features

Advanced Power Sequencing

• Protects connected equipment by preventing excessive inrush current.

• Three delayed outlet banks (two outlets each) for orderly power-up and power-down sequencing.

• Supports momentary or maintained sequencing via rear terminal block or front panel control.

Superior Noise Filtration

• Built-in RF and EMI noise filtering helps reduce interference and maintain optimal audio and video performance.

Reliable Surge Protection

• Comprehensive surge suppression keeps your devices safe from unexpected voltage spikes.

Convenient Outlet Layout

• 9 total outlets: eight on the rear and one front-panel convenience outlet.

• Rear outlets are generously spaced to accommodate large wall-wart adapters without blocking adjacent sockets.

15-Amp Power Capacity

• Supports up to a 15A load, protected by an integrated circuit breaker.

Status Indicators

• Front-panel LED indicators display Outlet Bank Status, Protection OK, and Power Status for quick visual verification.

Easy Configuration

• All sequencing and control settings are accessible from the rear panel for streamlined integration into any rack system.

Ideal For

• Professional audio racks

• Recording studios

• Live sound systems

• Broadcast installations

• AV integrators

• Commercial and church installations

The Furman M-8S combines essential protection, sequencing, and noise filtration—making it one of the best value power sequencers for professional and commercial rack systems.

FURMAN M-8S  Specifications

Maximum AC Current Rating 15 Amps, 120 VAC (Thermal breaker)
AC Cord 14AWGx3, 10 feet, black, fixed, NEMA 5-15P plug
Convenience Outlet (Front Panel) 1 Un-switched NEMA 15-5R
Rear Panel Outlets 2 Un-switched NEMA 5-15R (1 duplex)
6 Sequenced NEMA 5-15R (3 duplexes, each controlled by separate relay)
AC Surge Protection Merit Class (sacrificial)
Spike Protection Mode Line to neutral, zero ground leakage
Max Continuous Operating Voltage 130V RMS
Max Clamp Voltage 500 Volts Peak
Peak Impulse Current 12,000 Amps
Energy Rating (2 X 820µS) 225 Joules
AC Filtering Pi LCR Filter
Noise Attenuation >26dB, 100 Khz to 1 MHz
Operating Temperature Range 5C (40F) to 40C (105F) degrees
Humidity Range <90% rH (Relative Humidity)
Rocker Switch Front panel, Sequence (ON, OFF)
Thermal Circuit Breaker Front panel, push to reset
Front panel indicators Delay 1, Delay 2, Delay 3, Power, Protection OK
Control/Status/Triggering (Rear Panel) Rear Panel DIP Switches: 12V Mode On/Off,
GND Mode On, Momentary/Maintained
Potentiometer Rear panel, time calibration fine tune delay adjust
Remote Terminal +5-30VDC In, 12VDC (12mA) Out
Remote Terminal Phoenix type 4-Pin Connector with Screw terminals; +12V, STAT, REM, GND (Class 2 Wiring)
Size 1.75” X 19.00” X 6.5” (HWD) – ANSI 1RU
Mass 5.3 lbs.
Power Consumption (No Load) 5 Watts
Safety Agency C/CSA/US