The Shure UA864US Wall-Mounted Wideband Antenna is a professional active directional UHF antenna designed to provide reliable wireless microphone reception in permanent AV installations. Operating across 470–698 MHz, the UA864US combines wideband RF coverage, adjustable signal gain, and a discreet, low-profile enclosure for conference rooms, classrooms, houses of worship, theaters, and commercial facilities.

Unlike traditional external antennas that require visible mounting hardware, the UA864US features a paintable neutral-white housing that blends into walls and ceilings. Its directional reception pattern provides approximately 100° coverage, helping system designers position antennas toward the intended wireless microphone operating area.

Compatible with select Shure ULX-D, UHF-R, ULX, and Axient wireless systems operating within its supported frequency range, the UA864US offers flexible antenna placement and adjustable RF performance for professional wireless installations.

Shure UA864US Features and Benefits

Wideband UHF Coverage – 470–698 MHz

The UA864US supports wireless microphone systems operating between 470 and 698 MHz, providing flexibility for compatible Shure UHF receivers and antenna distribution equipment.

Its wideband design is useful in facilities operating multiple wireless microphone channels across different supported frequency bands.

Actual usable frequencies depend on regional regulations and the connected wireless system.

Directional Reception with 100° Coverage

The UA864US provides a nominal 100° reception beamwidth measured at the 3 dB points near the center of its operating frequency range.

This directional pattern allows installers to aim antenna coverage toward conference seating, presentation areas, stages, or other locations where wireless microphones are used.

Strategic placement helps improve RF reception while reducing unnecessary exposure to signals arriving from outside the intended coverage area.

Four-Position Adjustable RF Gain

A built-in four-position gain switch allows installers to adjust antenna signal levels to suit the installation.

  • +10 dB: Provides active amplification to compensate for appropriate coaxial cable losses.
  • 0 dB: Provides nominal signal gain for installations requiring no additional amplification.
  • −10 dB: Attenuates RF signals when received levels are excessive.
  • −20 dB: Provides additional attenuation for strong RF environments.

This flexibility helps optimize receiver input levels and reduce the possibility of excessive RF gain.

The +10 dB setting requires compatible DC bias power through the coaxial antenna connection. The 0, −10, and −20 dB settings do not require external power.

Low-Profile, Paintable Housing

The UA864US features a neutral-white enclosure designed to blend into professional interior spaces.

Its low-profile construction is suitable for wall and ceiling mounting, while the paintable exterior allows the antenna to match surrounding architectural finishes.

This makes the UA864US particularly useful in corporate offices, educational facilities, boardrooms, and other environments where visible RF equipment may be undesirable.

Flexible Wall and Ceiling Installation

The UA864US supports surface mounting on walls, ceilings, and suitable metal surfaces.

An attached BNC cable allows convenient surface or through-wall cable routing, helping installers maintain a clean appearance.

For optimal performance, antennas should be positioned with appropriate line-of-sight coverage and separation from potential sources of RF interference.

The UA864US is intended for indoor installations and should not be installed outdoors or exposed to excessive moisture.

Compatible with Shure Antenna Distribution Systems

The UA864US can be connected to compatible Shure wireless receivers and antenna distribution systems that support its operating frequency range.

For example, the Shure UA844+SWB Antenna Distribution System can distribute signals from a pair of compatible UA864US antennas to multiple wireless receivers.

The UA844+SWB also provides 15V DC antenna bias power, supporting the UA864US when its active +10 dB gain setting is required.

For diversity wireless microphone systems, two appropriately positioned antennas are typically used to maintain separate Antenna A and Antenna B reception paths.

Shure UA864US Key Features

  • Wideband UHF operation from 470–698 MHz
  • Active directional antenna for professional wireless microphones
  • Nominal 100° reception beamwidth
  • Four selectable gain settings: +10, 0, −10, and −20 dB
  • 2.5 dBi nominal antenna gain at the 0 dB setting
  • Low-profile neutral-white enclosure
  • Paintable housing for architectural integration
  • Wall, ceiling, and compatible metal-surface mounting
  • Attached BNC cable for convenient installation
  • 50-ohm RF impedance
  • Compatible with select Shure wireless systems
  • Suitable for permanent indoor AV installations

Technical Specifications

Specification Details
Manufacturer Shure
Model UA864US
Product Type Active Directional Wideband Antenna
RF Frequency Range 470–698 MHz
Reception Pattern Directional
3 dB Beamwidth 100° at center frequency
Antenna Gain 2.5 dBi at 0 dB setting
Selectable Signal Gain +10, 0, −10, −20 dB
Gain Tolerance ±1 dB
RF Impedance 50 ohms
RF Connector BNC Female
Power Requirements 10–15V DC bias through coaxial connection
Current Consumption 75 mA
Third-Order Overload Intercept Point Greater than +30 dBm
RF Overload LED Threshold −15 dBm
Dimensions (H × W × D) 176 × 176 × 51 mm
Dimensions (Inches) 6.9 × 6.9 × 2 in
Weight 487 g (17.2 oz)
Operating Temperature −7°C to 49°C (20°F to 120°F)
Storage Temperature −29°C to 74°C (−20°F to 165°F)
Housing Color Neutral White
Mounting Wall, Ceiling, or Suitable Metal Surface
Installation Environment Indoor

Ideal Applications

Corporate Boardrooms and Conference Facilities: Provides discreet wireless microphone antenna coverage without visually distracting equipment.

Classrooms and Lecture Halls: Supports reliable wireless microphone reception for instructors, presenters, and educational AV systems.

Houses of Worship: Allows antennas to be positioned discreetly throughout sanctuaries and performance areas.

Theaters and Performing Arts Centers: Provides directional RF coverage for compatible wireless microphone systems in permanent installations.

Commercial AV Installations: Offers flexible mounting and adjustable RF gain for professionally designed wireless microphone systems.

Why Buy the Shure UA864US from Audio Supply?

Audio Supply provides professional Shure wireless microphone systems, antennas, distribution equipment, and RF accessories for commercial AV, broadcast, and live sound applications.

Whether you're designing a new wireless microphone installation or improving an existing system, Audio Supply can help you select compatible antennas, coaxial cables, and RF distribution equipment.

Need a Compatible Antenna Extension Cable?

The Shure UA850 50-Foot UHF Antenna Extension Cable provides additional installation flexibility when the UA864US must be positioned away from the wireless receiver rack.

Featuring 50-ohm RG8X/U coaxial construction and BNC connectors, the UA850 is suitable for compatible Shure remote antenna installations.

When using longer coaxial cable runs, the UA864US selectable gain settings can help compensate for appropriate RF cable losses without automatically requiring a separate in-line antenna amplifier.

List price: $760.00
Price: $540.00