With a FreeSpeak II FSII-BP19-X4-US you can roam freely around a site or facility while talking and listening to all, or selected, members of the production team. With its four communication routes, the beltpack gives you the flexibility to communicate quickly and seamlessly with individuals or groups, and to change communication routes as often as needed.
With FS II you can set up a wireless system specifically tailored to local needs by locating transceivers and beltpacks in areas where they are needed most. And because the beltpacks operate in the unlicensed 1.90 and 2.4 GHz frequency spectrum, there is no interference with existing wireless systems, even those located in the same area.
FreeSpeak II offers a choice of two transceivers:
-
FS II transceiver that operates using E1 digital transmission
-
FS II IP transceiver (IPT) that leverages your existing IP infrastructure for convenience and ease of installation.
With FreeSpeak II for Eclipse HX, wireless beltpack users can communicate with any Eclipse HX panel users on a one-to-one or group basis.
FSII-BP19-X4-US Speacification
|
Beltpack Frequency Response
|
100 Hz to 7.1 kHz
|
|
Beltpack Assignment-Select Buttons
|
2, used to edit beltpack menu options
|
|
Number of sumultaneous Full-Duplex Audio Paths
|
Up to 7 including Reply Key and two PTT keys. Only four with individual level control.
|
|
Level/Talk Controls
|
2 top-mounted rotary encoders
|
|
Headset Connector
|
XLR-4M, Clear-Com standard
|
|
Headphone Impedance
|
≥32 ohm
|
|
Microphone Type
|
Dynamic or electret, selectable in beltpack menu
|
|
Input Level
|
70 to -40 dBu
|
|
Electret headphone voltage
|
2.3V
|
|
Microphone and Headset Limiters
|
Selectable in beltpack menu
|
|
Powering
|
Li-Ion Battery, 3 AA alkaline cells
|
|
Latency for E1
|
|
|
Latency for AES67
|
|
|
Battery Charging
|
In unit, via 5-way AC60 charger
|
|
Battery Life
|
Approximately 18 hours
|
|
Range from Single FSII-TCVR-19 Transceiver
|
500 m from transceiver in line-of-sight conditions; 50 m indoors;
use multiple transceivers for larger, custom coverage areas
|
|
Approx. dimensions
|
38 x 130 x 100 mm (dwh) (1.5 x 5 x 3.75 inches)
|
|
Weight (with batteries)
|
Approx. 400g (9 oz)
|
