The R.35COAX is a two-way, full-range loudspeaker system designed to provide high quality voice and music reproduction in applications requiring extreme weather resistance. It is designed to withstand long-term exposure to tough, environmental conditions and to provide performance normally associated only with indoor loudspeakers. The R.35COAX has a 1.25-inch (32mm) exit HF compression driver and a 10-inch (254mm) cone LF driver with a 2-inch voice coil. The HF assembly is coaxially mounted with the LF driver allowing 90° conical coverage with low distortion. The carbon ring cone design provides a cone area nearly equivalent to a typical 12-inch driver cone. The Music / Voice switch provides an out-of the-box selectable flat response or 3dB boost for increased vocal intelligibility allowing for additional application flexibility. The design uses Biamp's proprietary Tru-Phase™ high frequency compression driver phase plug to provide wide dispersion, low distortion and increased intelligibility. The LF driver cone is treated with the same hydrophobic protection as the grille cloth to provide full weather-resistance. The enclosure has a reinforced ribbed interior with weather-treated wooden inserts to reduce resonance, increase rigidity and reduce rear and lateral radiation. The R.35COAX carries a 5-year product warranty and a 15-year enclosure warranty.
R.35COAX FEATURES
Excellent musicality and intelligibility, and low distortion in an extremely compact enclosure • Weather-resistant, compact, matte finish paintable high impact ABS plastic modified-trapezoidal enclosure • Hydrophobically-treated grille and LF driver cone, polymer HF diaphragm, and moisture-sealed crossover • 200W Auto former (standard), selectable 8 ohm or 70V/100V operation • Corrosion-resistant dual-layer powder-coated low-profile steel yoke and aluminum grille.
R.35COAX SPECIFICATIONS
Operating Mode Passive, Selectable Low Impedance or 70V/100V Operating Environment Indoor or Weather-Resistant Outdoor Operating Range2 70 Hz to 16 kHz Nominal Beamwidth (H x V) 90° x 90° Transducers LF 1 x 10" (254mm) Carbon ring cone with hydrophobic treatment, 2" (51mm) Voice Coil HF 1 x 1.25" (32mm) exit compression Continuous Power Handling3 @ Nominal Impedance Passive 40V 200W @ 8 Ohms (800W peak) Auto former Taps 70V: 200W,100W, 50W, 25W 100V: 200W,100W, 50W MUSIC VOICE Nominal Sensitivity4 Passive @ 1W 97 dB @ 2.83V 97 dB @ 1W 99 dB @ 2.83V 99 dB Nominal Maximum SPL5 (Whole Space) Passive Peak 126 dB Continuous 120 dB Peak 128 dB Continuous 122 dB Equalized Sensitivity6 System @ 1W 97 dB @ 2.83V 97 dB Equalized Maximum SPL7 System Peak 126 dB Continuous 120 dB Required Accessories High Pass Filter - 70 Hz, 24 dB /octave, Digital Signal Processor Recommended Amplifiers Passive 200W - 400W @ 8 Ohms, (40V - 57V).
PHYSICAL Input Connection NL4 Speak on-type connector (low impedance only), and 7-position terminal strip for low impedance or constant voltage operation Controls Music / Voice switch, 70V/100V operation jumper Mounting Points Two (2) M8 rigging points Included Accessories Zinc-rich epoxy dual-layer powder-coated yoke, included integral safety cable mounting point Environmental IP55W per IEC 529, designed to MIL-STD-810G Color-matched ABS plastic input panel weather cover with 13.5mm ID gland nut installed in .82" knockout Dimensions H x W x D 11.00" x 13.00" x 13.50" (279 x 330 x 343 mm) Weight 26 lbs. (11.8 kg) with included yoke.
