The mXa-1502 with AquaControl™ provides total control over four separate zones with a rich compliment of digital signal processing, including routing, auto-mixing, ducking, amplifier monitoring, event scheduling/triggering and more. All through our easy-to-use AquaControl™ that doesn’t require a week of tutorials to understand and configure. It lets you and your customers navigate using virtually any browser-enabled device. Trouble-shoot or re-configure it without having to travel to the client location. Or add our hard-wired WR-1.1 single-gang remote.
Ashly mXa1502 Features
❚ 8-balanced Mic/Line Inputs
❚ Precision Class A mic preamp design
❚ 4 Stereo Line Inputs
❚ 4 Outputs
❚ 2 x 150W Class D Amplifiers with selectable Multi-mode operation (2/4/8 Ohm + 25/70/100V)
❚ Four convenient front-panel buttons for source/preset select
❚ Scheduler and RTC (Real-Time Clock) allows user-defined automatic, timed activation of various operations
❚ Generous integration I/O, including: Network, Serial, GPIO, VC, Standby & Fault (works with the WR-1, WR-1.1, WR-1.5, and WR-2 remotes)
❚ Compact 1U design reduces rack space requirements
❚ New, advanced Ashly AquaControl™ software allows easy and convenient access from many browser-based devices. No app to install! Comprehensive DSP includes:
Inputs
❚ Programmable Analog Mic Preamps ❚ Phantom Power On/Off ❚ Gain with Link Group Assign and Polarity switch ❚ Remote Gain ❚ DVCA Gain ❚ Meter with Peak Hold Equalizers ❚ 31-band Graphic — Constant or Proportional Q ❚ 10-band Parametric EQ + HPF / LPF ❚ Signal Generator ❚ Delay
Dynamics
❚ Compressor ❚ Auto Leveler ❚ Clip (Brick Wall Limiter) ❚ Gate ❚ Matrixing ❚ Automixers ❚ Ducker
Outputs
❚ 31-band Graphic — Constant or Proportional Q ❚ 10-Band Parametric ❚ FIR Filters ❚ 2/3/4-way Crossover ❚ Ambient Noise Control ❚ Delay ❚ Dynamics (same as Inputs) ❚ Signal Generator ❚ Meter with Peak Hold
Event Scheduler (Calendar)
Event Logs
Reports
Compatibility
❚ Windows® OS 10 ❚ Mac® OS 10 and later ❚ Linux Web Browsers ❚ Chrome for Windows®, OS X, iOS, Android® ❚ Safari for OS X ❚ Edge for Windows
Ashly mXa1502 Specifications
|
Number of Input Channels
|
16 (8 Balanced Mic/Line, 4 Unbalanced Stereo Line)
|
|
Number of Output Channels
|
4 (2-Powered, 2-AUX Line)
|
|
Amplifier Power Output
|
2 X 150W @2/4/8 Ohms & 25/70/100V. 300W Bridged
|
|
Damping Factor
|
>250 (8 Ohm load <1kHz)
|
|
Distortion (SMPTE, typical)
|
<0.5%
|
|
Distortion (THD-N, typical)
|
<0.5% (8 Ohms, 10dB below rated power, 20Hz–20kHz)
|
|
Channel Separation
|
–75dB (dB from full output, 1kHz)
|
|
Signal-to-Noise (unweighted)
|
>99dB (20Hz-20kHz, Gain@26dB)
|
|
Frequency Response
|
20Hz-20kHz, ±0.05dB
|
|
Balanced Input Connector
|
Euroblock 3.5mm
|
|
Input Impedance
|
10k Ohms
|
|
Maximum Input Level
|
+21dBu
|
|
Speaker Output Connector
|
Euroblock 7.62mm
|
|
Nominal Voltage Input
|
100 – 240VAC
|
|
Operating Range
|
70 – 270VAC
|
|
Power Supply Type
|
SMPS with active PFC
|
|
AC Mains Line Cord Connector
|
Detachable Nema 5-15 for USA
|
|
Control Network
|
RJ-45 connector, 1GB Ethernet
|
|
AUX Output Connector
|
Balanced Euroblock 3.5mm
|
|
AUX Output Maximum Level
|
+21dBu
|
|
Data Connection
|
Euroblock 3.5mm – Gnd, +18V, Data Out, Data In
|
|
Fault Condition Logic Outputs
|
Euroblock 3.5mm – fault indicated by loss of 1Hz “heartbeat” pulse signal
|
|
Remote DC Level Control
|
Euroblock 3.5mm – Gnd, CV, V+ per input
|
|
Amplifier Protection
|
Shorted output power limiting, over-temperature, DC-output, power-supply fault, mains-fuses & inrush-current limiting
|
|
Cooling
|
Continuously variable temperature controlled fan
|
|
Unit Dimensions
|
19”W x 1.75”H x 14.54”D (483mm x 45mm x 369mm)
|
|
Dimensions
|
25.2”W x 2.5”H x 19.5”D / 641mm x 64mm x 495mm
|
|
Weight
|
13.0 lbs (5.4 kg)
|
