The Cloud Z4MK4 and Z8MK4 are multi-zone, rack-mounting (3U) audio mixers. They combine simple control of background music with versatile microphone paging for up to eight separate areas. They are suitable for use in many types of premises, including pubs, bars, clubs, shops, offices, hotels, etc. Both models have six stereo line inputs – four balanced and two unbalanced - and three microphone inputs, one of which is configured specifically for use with paging mics. The Z4MK4 has four separate mono zone outputs, and the Z8MK4 eight; apart from the number of supported zones, the models are identical. The front panel provides separate controls for music source selection, music level and two mic levels in each zone. EQ cards suitable for various popular makes and models of installed sound loudspeakers may be fitted to any or all outputs. The Z4MK4 and Z8MK4 are directly compatible with Cloud PM Series paging microphones via the Cloud Digital Paging Interface, which requires a single Cat 5 cable for connection. The interface allows a second mixer to be cascaded, permitting up to 16 zones to be addressed. The paging mic input can alternatively be configured to suit most OEM paging systems, zone selection for paging being via short-to-ground access connections. Each zone may be independently configured for music ducking, triggered either by the access port or VOX control. The ducking feature has selectable release times. The paging mic has priority over the other mic inputs (Mic 1 and Mic 2). Paging mic level to each zone is set with a recessed front panel preset control. When Mic1 and/or Mic 2 are in use, music ducking can also be enabled on a per-zone basis. Additionally, Line input 6 may be set to have priority over any other selected music source in any zone, to facilitate connection of a digital sound store, juke-box, emergency message system or similar source. Music level only, or music level and source selection may be controlled remotely in each zone if wished, using standard Cloud RL-1 Series or RSL-6 Series remote control plates. Each zone section of the Z4MK4 and Z8MK4 is also provided with a multi-purpose Facility Port. The main purpose of this port is to connect optional LM-2 remote input plates, which allow mic and/or line level sources located in the zone – such as local mics, DJ consoles, laptops, MP3 player docks, etc. - to be routed to the zone’s audio system. Various options are available to configure the priorities that sources connected via the Facility Port have relative to the unit’s primary sources. The Facility Port can also be used as a general purpose, balanced, line level, auxiliary zone input.
Cloud Electronics Z8MK4 Features
-
8 Zone Mono Mixer
-
NEW Digital Paging Interface for PM Paging Mics with IN/THRU Connections for Multi Mixer Configuration
-
NEW Digital Switch Mode Power Supply (600mA Input Optional Paging & Message Announcer (PM-4SA)
-
NEW Lines 1-6 now 2 x Unbalanced on PHONO + 4 x Balanced on Phoenix 3pin 3.5mm connectors
-
Line 6 priority, can be selected on a Zone by Zone basis
-
Optional Facility input plates on all zones (LM-2/A, B&W)
-
Zone Music Level and Source Selection via RSL-6/A (B&W) or RL-1/A (B&W) Wall Remotes
-
2 Mic Inputs with Volume Controls
-
Input for Paging Mic with Priority and Zone Selection
-
Separate EQ for Mic and Music
-
All Mics have Priority over Music
-
Fire Alarm “Music Mute” Interface
-
Optional custom equalizer modules for various loudspeakers brands can be fitted to any independent zone
