The Biamp Desono CM60DTD is a professional 6.5-inch two-way ceiling loudspeaker designed for clear speech reproduction and full-range background music in commercial audio installations. Combining a coated-paper woofer, soft-dome tweeter, and versatile 70V/100V transformer, the CM60DTD provides dependable performance for conference rooms, offices, retail environments, educational facilities, and distributed sound systems.
With its 150-degree nominal conical coverage, the CM60DTD is designed to distribute sound across a broad listening area. Its tuned bass-reflex enclosure supports low-frequency performance, while the two-way driver configuration reproduces both speech and music with clarity.
The CM60DTD also offers several installer-friendly features, including a shallow 6.2-inch mounting depth, front-accessible transformer tap selector, blind-mount ceiling clamps, and a thin-edge magnetic grille. These features make it a practical choice for both new construction and commercial audio upgrades.
Clear Speech and Full-Range Background Music
The Desono CM60DTD combines a 6.5-inch coated-paper low-frequency driver with a 1-inch soft-dome tweeter to deliver balanced sound for paging, announcements, presentations, and background music.
Its published operating range of 75 Hz to 22 kHz (-10 dB) provides useful low-frequency extension and high-frequency detail for commercial audio applications.
With a nominal maximum continuous SPL of 104 dB at one meter and a peak rating of 110 dB, the CM60DTD can support a variety of room sizes and listening requirements when properly designed into the sound system.
The loudspeaker's tuned bass-reflex port helps optimize low-frequency output, providing fuller music reproduction than would typically be expected from a basic paging-only ceiling speaker.
Flexible 70V, 100V, and 16-Ohm Operation
The CM60DTD supports both constant-voltage distributed audio systems and low-impedance installations.
Its integrated transformer provides selectable power taps for matching the loudspeaker to amplifier capacity, room size, and desired listening level.
70V transformer settings:
60W, 30W, 15W, 7.5W, and 3.75W.
100V transformer settings:
60W, 30W, 15W, and 7.5W.
For applications using a conventional low-impedance amplifier, the transformer can be bypassed for 16-ohm operation.
This flexibility allows system designers to use the CM60DTD in a wide range of commercial audio systems, from multi-speaker paging installations to smaller background music systems.
The appropriate amplifier and power setting should be selected according to the total system load and installation requirements.
Wide 150-Degree Conical Coverage
The CM60DTD features a nominal 150-degree conical beamwidth, making it suitable for distributing audio over broad listening areas.
Wide coverage can help system designers achieve more consistent sound across offices, corridors, meeting spaces, and other commercial environments.
For larger rooms, multiple CM60DTD loudspeakers can be distributed throughout the ceiling to improve coverage consistency and reduce excessive level differences between listening positions.
Actual coverage depends on ceiling height, room acoustics, loudspeaker spacing, and operating frequency.
Installer-Friendly Ceiling Mounting
Biamp designed the CM60DTD to simplify installation in suspended and compatible finished ceilings.
The loudspeaker requires only 6.2 inches (157 mm) of mounting depth and uses two integrated mounting clamps with a grip range of 3–65 mm.
Its blind-mount design allows the speaker to be installed from below the ceiling, reducing the need for access above the finished surface.
Included tile rails, tile rail spacers, and a cutout template help installers position and support the loudspeaker.
The 9.1-inch cutout diameter and compact housing dimensions make it suitable for many commercial ceiling applications, provided adequate structural support and clearance are available.
Magnetic Grille and Front-Accessible Tap Selector
The CM60DTD features a thin-edge magnetic grille that creates a clean, unobtrusive appearance when installed.
The white grille can be painted to coordinate with the surrounding ceiling finish, making it suitable for offices, conference rooms, hotels, retail stores, and other architecturally sensitive spaces.
Its magnetic attachment allows the grille to be removed and reinstalled without conventional grille fasteners.
The transformer tap selector is accessible from the front of the loudspeaker, allowing installers to change the power setting without removing the speaker or accessing the ceiling cavity.
This is especially useful when balancing sound levels across a distributed audio installation.
Zoom Certified for Professional Meeting Spaces
The Biamp Desono CM60DTD is listed as Zoom Certified, making it a suitable loudspeaker option for supported Zoom Rooms audio system designs.
Its combination of speech clarity, wide coverage, and commercial installation features makes it useful in conference rooms, training spaces, and meeting facilities.
The CM60DTD is a passive loudspeaker and requires an appropriate external amplifier. It is not a standalone Zoom Rooms system.
System performance depends on the complete audio design, including microphone selection, amplification, processing, loudspeaker placement, and room acoustics.
Built for Commercial Audio Installations
The CM60DTD incorporates three-step self-resetting loudspeaker protection to help protect against overload conditions.
Its 4-way Euroblock connector includes permanent pass-through capability, simplifying wiring in distributed loudspeaker installations.
The enclosure also provides two safety attachment points and a conduit entry provision for professional installation requirements.
The CM60DTD is ETL listed to UL 1480A and UL 2043 and certified to CSA C22.2 No. 62368-1. It is also identified by Biamp as suitable for air-handling spaces under the applicable NFPA requirements and conforms with City of Chicago codes.
These features make it a practical option for commercial buildings requiring professional sound quality and installation compliance.
Biamp Desono CM60DTD Key Features
- 6.5-inch coated-paper woofer and 1-inch soft-dome tweeter
- Two-way design for clear paging, speech, and background music
- 75 Hz–22 kHz operating range (-10 dB)
- Wide 150-degree nominal conical coverage
- Maximum SPL of 104 dB continuous and 110 dB peak
- Selectable 70V/100V transformer taps with 16-ohm bypass
- Shallow 6.2-inch mounting depth with blind-mount ceiling clamps
- Front-accessible transformer tap selector
- Thin-edge, paintable magnetic grille
- Tuned bass-reflex port for improved low-frequency performance
- Three-step self-resetting loudspeaker protection
- Zoom Certified with UL, ETL, and CSA compliance as specified
Biamp Desono CM60DTD Technical Specifications
| Specification | Details |
|---|
| Manufacturer | Biamp |
| Product Series | Desono |
| Model | CM60DTD |
| Loudspeaker Type | Two-way ceiling loudspeaker |
| Operating Mode | Passive |
| Operating Environment | Indoor |
| Low-Frequency Driver | 6.5 in (165 mm) coated-paper cone |
| High-Frequency Driver | 1 in (25 mm) soft dome |
| Operating Range (-10 dB) | 75 Hz–22 kHz |
| Nominal Beamwidth | 150° conical |
| Nominal Impedance | 16 ohms, transformer bypass |
| Continuous Power Handling | 60W at 16 ohms |
| Peak Power Handling | 240W |
| Nominal Sensitivity at 1 m | 86 dB at 1W; 83 dB at 2.83V |
| Maximum Continuous SPL at 1 m | 104 dB |
| Maximum Peak SPL at 1 m | 110 dB |
| 70V Transformer Taps | 60W, 30W, 15W, 7.5W, 3.75W |
| 100V Transformer Taps | 60W, 30W, 15W, 7.5W |
| Recommended Amplifier, 16-Ohm Mode | 60–120W at 16 ohms |
| Loudspeaker Protection | Three-step self-resetting protection |
| Input Connection | 4-way Euroblock with permanent pass-through |
| Mounting System | Two blind-mount ceiling clamps |
| Mounting Grip Range | 3–65 mm |
| Mounting Depth | 6.2 in (157 mm) |
| Overall Diameter | 10.2 in (258 mm) |
| Cutout Diameter | 9.1 in (232 mm) |
| Dimensions (H × Diameter) | 6.2 × 10.2 in (157 × 258 mm) |
| Weight | 8.8 lb (4.0 kg) |
| Grille | White, thin-edge magnetic grille |
| Safety Attachment Points | Two |
| Conduit Provision | 0.75 in NPT knockout |
| Zoom Certification | Zoom Certified |
| Safety Compliance | ETL listed to UL 1480A and UL 2043; CSA C22.2 No. 62368-1 |
| Air-Handling Space Suitability | NFPA 70 and NFPA 90, as specified by Biamp |
| Additional Compliance | City of Chicago codes |
Included Installation Accessories
- Ceiling tile rails
- Tile rail spacers
- Ceiling cutout template
- Magnetic grille
Optional accessory: Biamp SQGR square grille, available separately.
Recommended Applications
- Conference and Meeting Rooms: Clear speech reproduction for presentations and conferencing.
- Houses of Worship: Distributed speech and background music in compatible indoor spaces.
- Corporate Offices: Paging, announcements, and background music.
- Retail Stores: Evenly distributed music and customer announcements.
- Educational Facilities: Classrooms, training rooms, and multipurpose areas.
- Hotels and Hospitality: Background music in corridors, waiting areas, and common spaces.
- Manufacturing Facilities: Indoor paging and background audio where environmental conditions are appropriate.
Why Buy the Biamp Desono CM60DTD from Audio Supply?
Audio Supply offers professional Biamp loudspeakers and commercial audio equipment for businesses, integrators, houses of worship, and sound system installers.
The Biamp Desono CM60DTD combines clear speech reproduction, full-range background music performance, flexible amplifier compatibility, and practical installation features. Whether you're expanding an existing distributed audio system or designing a new commercial installation, Audio Supply can help you select appropriate professional audio equipment for your project.