The Shure UA874US Active Directional Antenna is a professional UHF antenna designed to improve wireless microphone reception in live sound, broadcast, corporate AV, and installed audio systems. Operating across 470–698 MHz, the UA874US uses a log-periodic dipole array to provide directional RF coverage while reducing reception of unwanted signals outside the intended coverage area.

Unlike standard omnidirectional antennas, the UA874US focuses reception toward the stage, presentation area, or other location where wireless transmitters are operating. Its cardioid reception pattern helps improve RF signal quality when properly positioned, making it a practical solution for venues where wireless receivers are installed away from performers.

An integrated low-noise amplifier offers four selectable gain settings to compensate for coaxial cable losses. With flexible mounting options and compatibility with appropriately powered Shure wireless systems, the UA874US is well suited for both portable sound systems and permanent installations.

Directional RF Reception for Wireless Microphones

The UA874US features a log-periodic dipole array with a cardioid directional reception pattern.

Its approximately 70-degree beamwidth helps concentrate reception toward the intended wireless coverage area while reducing sensitivity to signals arriving from other directions.

This directional design offers several advantages:

  • Helps reject unwanted RF signals outside the coverage area
  • Supports more controlled wireless microphone reception
  • Allows antenna placement away from receiver racks
  • Helps improve signal quality in challenging RF environments

The antenna is particularly useful in theaters, houses of worship, auditoriums, and performance venues where transmitters operate within a defined area.

Four Selectable RF Gain Settings

The UA874US incorporates a low-noise RF amplifier with four selectable signal gain settings:

  • −6 dB: Reduces signal level when transmitters are nearby or RF signals are strong
  • 0 dB: Suitable when additional amplification is unnecessary
  • +6 dB: Compensates for moderate coaxial cable signal loss
  • +12 dB: Provides additional compensation for longer or higher-loss cable runs

These settings allow installers to balance antenna output with the signal loss introduced by coaxial cable.

Proper gain selection is important because excessive amplification can overload the receiver's RF input and degrade performance.

For best results, select the lowest gain setting that provides reliable reception while compensating for the calculated cable loss.

Wide 470–698 MHz UHF Frequency Coverage

The Shure UA874US operates across the 470–698 MHz UHF frequency range, providing broad coverage for compatible professional wireless microphone systems.

Its wide frequency response makes it suitable for installations using multiple wireless channels, provided the equipment operates within the antenna's supported frequency range.

The UA874US is designed for use with compatible Shure receivers and antenna distribution systems that supply the required DC bias power through the antenna connection.

Compatibility should be confirmed using the receiver's operating frequency range and antenna power specifications.

Flexible Antenna Placement and Mounting

Proper antenna placement can make a significant difference in wireless system performance.

The UA874US supports several installation methods, including:

  • Microphone stand mounting
  • Wall mounting
  • Ceiling suspension

The included swivel adapter bracket allows the antenna to be aimed toward the desired coverage area.

For reliable operation, position the antenna with a clear path toward the wireless transmitters whenever practical. Avoid placing it directly behind large metal objects or other structures that may block RF signals.

In diversity wireless systems, two appropriately positioned antennas can help provide more consistent reception throughout the intended coverage area.

Professional RF Performance and Overload Monitoring

The UA874US provides 7.5 dBi on-axis antenna gain and a third-order output intercept point greater than 30 dBm.

Its integrated RF overload indicator helps identify excessively strong signals when operating with amplifier gain enabled.

If the overload indicator illuminates, reducing the gain setting or adjusting antenna placement may help prevent receiver input overload.

These features allow technicians to optimize antenna performance for the actual RF conditions of the installation rather than relying on maximum amplification.

Compatible Wireless Systems and Installation Requirements

The UA874US can be used with compatible Shure wireless receivers and antenna distribution equipment, including appropriately configured systems from the ULX-D, QLX-D, SLX-D, and Axient families.

Before installation, verify that:

  • The wireless system operates within 470–698 MHz
  • The receiver or antenna distribution system supplies compatible DC bias power
  • The coaxial cable uses suitable 50-ohm RF connections
  • The antenna is positioned and oriented correctly for the coverage area

The UA874US is an active antenna and requires 10–15V DC bias power supplied through its coaxial connection.

Shure UA874US Key Features

  • Professional active directional UHF antenna
  • 470–698 MHz operating frequency range
  • Log-periodic dipole array design
  • Cardioid directional reception pattern
  • Approximately 70-degree antenna beamwidth
  • 7.5 dBi on-axis antenna gain
  • Integrated low-noise RF amplifier
  • Four selectable gain settings: −6, 0, +6, and +12 dB
  • RF overload indication
  • 50-ohm female BNC connection
  • Stand, wall, or ceiling mounting options
  • Included swivel adapter bracket

Shure UA874US Technical Specifications

Specification Details
Manufacturer Shure
Model UA874US
Antenna Type Active directional UHF antenna
Antenna Design Log-periodic dipole array
Frequency Range 470–698 MHz
Reception Pattern Cardioid
3 dB Beamwidth 70 degrees
On-Axis Antenna Gain 7.5 dBi
Selectable Signal Gain −6, 0, +6, +12 dB
Gain Accuracy ±1 dB
Third-Order Output Intercept (OIP3) Greater than 30 dBm
RF Overload LED Threshold −5 dBm
RF Connector Female BNC
Impedance 50 ohms
Power Requirements 10–15V DC bias through coaxial connection
Current Consumption 75 mA
Dimensions (H × W × D) 316 × 359 × 36 mm
Weight 317 g (11.2 oz.)
Operating Temperature −18°C to 63°C (0°F to 145°F)
Storage Temperature −29°C to 74°C (−20°F to 165°F)

Typical Applications

The Shure UA874US is suitable for:

  • Concert stages and live music venues
  • Houses of worship
  • Corporate conference facilities
  • Theaters and performing arts centers
  • Broadcast and production studios
  • Schools and universities
  • Touring wireless microphone systems
  • Professional AV installations

Why Buy the Shure UA874US from Audio Supply?

At Audio Supply, we understand that reliable wireless microphone performance depends on more than selecting the right transmitter and receiver. Antenna placement, RF distribution, cable loss, and frequency compatibility all play important roles in creating a dependable wireless system.

With decades of experience supplying professional Shure wireless equipment, Audio Supply helps customers select antennas and accessories suited to their installations.

Need Compatible Antenna Accessories?

Complete your Shure UA874US antenna installation with compatible RF cables and mounting accessories.

  • Shure UA825 – 25-foot coaxial antenna cable for connecting remote antennas to compatible wireless receivers or antenna distribution systems.
  • Shure UA850 – 50-foot coaxial antenna cable for installations requiring greater distance between the antenna and receiver.
  • Shure UA8100 – Additional accessory option; verify its exact function and compatibility before linking.

Proper antenna placement and cable selection help maintain reliable RF reception. Choose the cable length appropriate for your installation and account for signal loss when selecting the UA874US amplifier gain setting.

List price: $640.00
Price: $450.00