Ashly’s CA1.04, proprietary D-MAX technology brings together smart, cutting-edge amplifier design, a brand-new ultra-fast switching power supply with silicon dioxide semiconductors and diodes, and intelligent power management to deliver ultimate efficiency. You can operate two of CA 1.54s (6,000W total each) on a single 20-amp service! That’s higher efficiency than any other currently available amp we’ve tested! As this chart shows, Two of our leading competitor’s amps exceeds 20 amps…while providing LESS power to speakers than our CA-1.54!
And along with increased efficiency, DPFC allows LEEDs qualification.
Ashly CA1.04 Features
■ 2 and 4-channel models
■ 500 to 1500W @ 4 Ohms
■ Stable down to 2 Ohms
■ 70/100V operation
■ Ultra efficient D-MAX Class D design
■ Selectable gain per channel
■ Adjustable front panel input Gain per channel with lock-out
■ Bi-lateral SailFlow cooling
■ Installer friendly Euroblock and XLR combo connectors
■ Switchable HPF and Clip Limiter per channel
■ CV remote ports per channel
■ Solid metal front panel
Power amplifiers need cooling. In most amps, heat-reducing air flow takes a convoluted path in and around internal components. Front to back, back-to-front-side-to-side…those nice perforated grilles look simple…until you look inside the amp and see the helter-skelter air flow (see drawing below left)
We didn’t want cooling air to just wander around inside the CA chassis, so we came up with our unique SailFlow™ architecture (right drawing below). It directs internal airflow strictly over the areas that generate the most heat, rather than arbitrarily over the whole amp. This keeps the already highly efficient CA Series even cooler and assures reliable, stable operation, even under heavy loads.
Stable operation at 0.2 ohms (0.2Ω) No, that’s not a misprint.
For performance spaces, the CA Series can push hard and keep on pushing. Play it loud? No problem. Big subs? Bring ‘em on! CA can take it down to 2 Ohms without missing a beat (and without a drop- off in power). Run up to SIXTEEN 8-ohm loudspeakers from a single 4-channel CA amplifier.In commercial installations CA can deliver 70V and 100V power with no reconfiguration required. And choice of both XLR and Euroblock connectivity make the CA at home just about anywhere.
Photos speak louder than words, so we’re presenting front and back panels. Click below for full technical specifications. And then specify some CA’s. You, your customer, and that lonely 20-amp breaker will be impressed.
CA1.04 SPECIFICATION
| Model |
Ch. |
2Ω |
4Ω |
8Ω |
4Ω (br) |
Constant Voltage |
| CA-502 |
2 |
500W |
500W |
250W |
1,000W |
1,000W bridged 70v |
| CA-1.02 |
2 |
1,000W |
1,000W |
500W |
2,000W |
1,000W direct @ 70v -2000W bridged @ 100v |
| CA-1.52 |
2 |
1,500W |
1,500W |
750W |
3,000W |
1,500W direct @ 70v – 3,000W bridged @ 100v |
| CA-5.04 |
4 |
500W |
500W |
250W |
1,000W |
1,000W bridged 70v |
| CA-1.04 |
4 |
1,000W |
1,000W |
500W |
2,000W |
1,000W Direct @ 70v – 2,000W bridged @ 100v |
| CA-1.54 |
4 |
1,500W |
1,500W |
750W |
3,000W |
1,500W Direct @ 70v – 3,000W bridged @ 100v |
