The GS1 is an innovative flush-mount wall microphone that can also be used as a ceiling microphone when drop ceiling tiles are not available. Designed for distance miking, the GS1 features include a fully integrated preamp, an extremely high sensitivity rating of 38 millivolts, and complete immunity from RF interference caused by cell phones and GSM devices. The GS1 capsule is housed within a patented cradle that enables the microphone to be aimed up to an angle of 40 degrees towards the sound source. Its small footprint and flush-mount configuration allow the microphone to be unobtrusive without sacrificing sound quality. The GS1 terminates in a terminal block connector and is easy to install into a standard single gang box. A 2.75-by-4.5-inch mounting plate is included. The GS1 comes in stock satin nickel finish and is also available in white.
Audix GS1 Features
High output for distance miking
Immunity from RF interference
Miniaturized integrated preamp circuitry
Includes x 2.75″ by 4.5″ metal mounting plate · No external power adapter
Point and shoot directivity
Designed, assembled & tested in the USA
3-year warranty
Applications
Video conferencing • Distance learning • Surveillance • Hospital and medical procedure • Ambient room miking
Audix GS1 Specifications
| Transducer Type |
Condenser |
| Frequency Response |
60 Hz – 10 kHz |
| Polar Pattern |
Cardioid |
| Output Impedance |
150 ohms |
| Sensitivity |
38 mV / Pascal @ 1k |
| Equivalent Noise Level |
22 dB |
| Signal to Noise Ratio |
72 dB |
| Maximum SPL |
≥130 dB |
| Dynamic Range |
108 dB |
| Power Requirements |
18 – 52 V phantom |
| Connector |
3-pin Phoenix fe |
| Polarity |
Positive pressure on diaphragm produces positive voltage on blue (center) Phoenix conductor |
| Materials / Finish |
Brass aluminum and steel White or Nickel |
| Weight |
Belden 9451 P or 82761 |
| Length |
176 mm / 6.9 in |
