The D SERIES Distributed Design DP6 is a high-performance 6.5-inch pendant loudspeaker designed for open architecture spaces or any location where a stylish pendant form factor is desired. Featuring high power handling, high sensitivity, and realistic sound reproduction, the DP6 can be used in a wide variety of speech and music applications. It is equipped with a built-in autoformer, allowing the full loudspeaker output to be realized with 70V or 100V distribution lines. Uniform voicing means that the DP6 can be combined with other D SERIES ceiling and surface mount models without compromising consistency from zone to zone. The genuine coaxial design uses separate magnets for the LF and HF drivers for reduced distortion and industry-leading sensitivity, thereby permitting 3 dB to 6 dB greater output level while requiring half the amplification power of competing products. The proprietary Tru-Phase™ waveguide and perfectly centered driver produce a consistently wide conical polar response up to 16 kHz. Community’s patented Carbon Ring Cone Technology™ increases the effective cone area to further reduce distortion while reinforcing the cone for improved durability. An easy-access selector switch is conveniently located on the face of the loudspeaker for selectable 8 ohms or 70V/100V operation, while an integrated rear cover hides all wiring and hanging hardware for an aesthetically pleasing installation. Two 15-foot (4.5m) long 2mm (0.079”) high tensile galvanized steel wire rope suspension cables with integrated spring clips for attaching the cable to the enclosure are included, along with Gripple™ brand adjustable height cable fasteners. Optional accessories include 30ft (9.1m) and 50ft (15.2m) hang kits, a replacement Gripple™ speed clamp, and trimmable 14ft (4.3m) decorative split loom tubing. The powerful and versatile D SERIES DP6 provides high-quality paging and musical performance suitable for retail environments, restaurants, resorts, and numerous other applications where the importance of sonic quality cannot be ignored.
Applications
Bars and restaurants - Hotels, ballrooms and casinos - Shopping malls and retail environments - Health and fitness clubs - Houses of worship - Corporate meeting rooms - Airports, convention centers and exhibit halls
Biamp Desono DP6-B Black Key Features
-
Zoom Rooms Certified
-
Stylish, contoured contemporary pendant design
-
Same components and voicing as the DX ceiling and surface mount loudspeaker family
-
Consistent, wide dispersion up to 16 kHz
-
True coaxial loudspeakers with HF compression drivers
-
Tru-Phase high-frequency waveguide
-
Patented Carbon Ring Cone Technology
-
High efficiency, high output, high intelligibility, low distortion
-
Paintable enclosure constructed of high-impact ABS plastic to reduce resonances
-
Easy-access power tap switch for selectable 8 ohm or 70V/100V operation
-
Integrated rear cover hiding all wires and hanging hardware
-
Weather-resistant constructed with treated drivers and two-layer powder coated grilles
-
ETL listed to comply with UL1480
-
Available in standard black or white finishes
-
5-year warranty
Biamp Desono DP6-B Black Specifications
|
Height
|
14.73 inches (374.2 mm) high enclosure
|
Width
|
11.22 inches (285 mm) face diameter
|
Weight
|
11.8 lbs (5.4 kg)
|
Finish
|
Black
|
Material
|
Grille: Powder coated steel with safety line, black or white finish, paintable
|
Mounting
|
Two PHK-15 pendant hang kits (one for main suspension and one as a safety cable), each including 15ft (4.5m) long 2mm (0.77") high tensile galvanized steel wire rope suspension cables with integrated spring clips for attaching the cable to the loudspeaker bracket and Gripple™ brand adjustable height cable fasteners.
|
Accessories
|
Two PHK-15 pendant hang kits
Enclosure ABS plastic rear cover
Rear cover ingress weather plug
Required Accessories: Electronic high pass filter
|
|
Control
|
Front-face wattage / low impedance selector switch
|
|
Distortion
|
Distortion - 10% Full Power: 2nd Harmonic 3rd Harmonic
500 Hz 1.74% 1.19%
2 kHz 1.18% 0.35%
8 kHz 0.77% 0.04%
|
|
Loudspeaker Type
|
Two-way, full-range, coaxial pendant mount loudspeaker, 8 ohm or 70V/100V operation
|
Operating Range
|
65 Hz - 22 kHz
|
Crossover
|
Crossover Frequency: 1.2 kHz
|
Transformer
|
Transformer Taps - 70V: 60W, 30W, 15W, 7.5W and low impedance
100V: 60W, 30W, 15W
|
Sensitivity
|
Sensitivity (1W/1m): 94 dB SPL (125 Hz to 12.5 kHz 1/3 octave bands)
92 dB SPL (250 Hz to 4 kHz speech range)
|
Coverage
|
Nominal Coverage: 115º conical (1 kHz to 6 kHz)
125º conical (500 Hz to 6 kHz)
|
Signal Processing
|
Recommended Signal Processing: 65 Hz high pass filter
|
Drivers
|
LF 1 x 6.5-inch
HF 1 x 1-inch exit compression driver
Driver Protection: Self-resetting solid state circuit breaker
|
|
Audio
|
Input Connection: Two 2-position Euroblock connectors
|
Impedance
|
Nominal Impedance: 8 ohms
Minimum Impedance: 6.9 ohms @ 210 Hz
|
Maximum Input
|
100W continuous, 250W program
28 volts RMS, 63 volts momentary peak
|
Maximum Output
|
114 dB SPL / 120 dB SPL (peak 8 ohm)
|
Frequency Response
|
80 Hz - 20 kHz (±5 dB)
|
|
Zoom
|
Zoom Certified
|
|
Safety Features
|
Safety Features: Included safety cable. Each cable has an SWL of 99 lbs (45 kg).
Safety Agency Ratings: EETL listed to comply with UL1480 and CSA60065.
Suspension system and Gripple™ brand cable fastener listed per UL1598 and UL2239, TUV and CSA Class 3426-01 and Class 3426-81.
|
|
Specification Notes
|
Baffle: Reflex loaded UL 94V-0 rated ABS
Axial Q / DI: 4.7 / 6.7, 500 Hz to 6 kHz
|