Biamp Desono D SERIES DP6-W 6.5" Pendant Loudspeaker – White

The Biamp Desono DP6-W is a high-performance 6.5-inch pendant loudspeaker designed for open architecture spaces and modern commercial environments where aesthetics and audio quality are equally important. Part of the renowned D SERIES, the DP6-W delivers exceptional clarity, wide dispersion up to 16 kHz, and high output for both paging and background/foreground music applications.

Featuring a true coaxial design with high-efficiency LF and HF drivers, the DP6 ensures low distortion and high intelligibility even in demanding acoustic environments. Its built-in 70V/100V autoformer and selectable 8-ohm operation make it flexible for distributed audio systems. The Tru-Phase™ waveguide and Carbon Ring Cone Technology™ provide smooth, uniform coverage and increased durability.

Ideal for a wide range of venues including retail stores, restaurants, hotels, fitness centers, houses of worship, and airports, the DP6 comes equipped with integrated suspension hardware, adjustable Gripple™ fasteners, and a rear cover for clean, professional installation. With its sleek, Zoom Rooms Certified design and weather-resistant construction, this loudspeaker is perfect for both indoor and covered outdoor spaces.

Key Features:

  • 6.5” coaxial pendant loudspeaker with true HF compression driver

  • Consistent wide dispersion up to 16 kHz

  • 70V/100V or 8-ohm selectable operation via front-access switch

  • Stylish, paintable ABS plastic enclosure in white

  • Patented Tru-Phase™ waveguide and Carbon Ring Cone Technology™

  • Integrated wire concealment and suspension system

  • Weather-resistant design with treated drivers and dual-layer grilles

  • ETL listed (UL1480 compliant)

  • 5-year warranty

Applications:
Bars and restaurants, hotels and casinos, retail environments, fitness clubs, worship spaces, meeting rooms, airports, convention centers, and more.

Biamp Desono DP6-W White Specifications

GENERAL  
Height 14.73 inches (374.2 mm) high enclosure
Width 11.22 inches (285 mm) face diameter
Weight 11.8 lbs (5.4 kg)
Mounting Two PHK-15 pendant hang kits (one for main suspension and one as a safety cable), each including 15ft (4.5m) long 2mm (0.77") high tensile galvanized steel wire rope suspension cables with integrated spring clips for attaching the cable to the loudspeaker bracket and Gripple™ brand adjustable height cable fasteners.
Accessories Two PHK-15 pendant hang kits
Enclosure ABS plastic rear cover
Rear cover ingress weather plug
Required Accessories: Electronic high pass filter
ENVIRONMENTAL  
POWER  
CONTROLS & INDICATORS  
Control Front-face wattage / low impedance selector switch

 

LOUDSPEAKER  
Loudspeaker Type Two-way, full-range, coaxial pendant mount loudspeaker, 8 ohm or 70V/100V operation
Operating Range 65 Hz - 22 kHz
Crossover Crossover Frequency: 1.2 kHz
Transformer Transformer Taps - 70V: 60W, 30W, 15W, 7.5W and low impedance
100V: 60W, 30W, 15W
Sensitivity Sensitivity (1W/1m): 94 dB SPL (125 Hz to 12.5 kHz 1/3 octave bands)
92 dB SPL (250 Hz to 4 kHz speech range)
Coverage Nominal Coverage: 115º conical (1 kHz to 6 kHz)
125º conical (500 Hz to 6 kHz)
Signal Processing Recommended Signal Processing: 65 Hz high pass filter
Drivers LF 1 x 6.5-inch
HF 1 x 1-inch exit compression driver
Driver Protection: Self-resetting solid state circuit breaker
AUDIO  
Audio Input Connection: Two 2-position Euroblock connectors
Impedance Nominal Impedance: 8 ohms
Minimum Impedance: 6.9 ohms @ 210 Hz
Maximum Input 100W continuous, 250W program
28 volts RMS, 63 volts momentary peak
Maximum Output 114 dB SPL / 120 dB SPL (peak 8 ohm)
Frequency Response 80 Hz - 20 kHz (±5 dB)
CERTIFIED SOLUTIONS  
Zoom Zoom Certified
COMPLIANCE  
Safety Features Safety Features: Included safety cable. Each cable has an SWL of 99 lbs (45 kg).
Safety Agency Ratings: EETL listed to comply with UL1480 and CSA60065.
Suspension system and Gripple™ brand cable fastener listed per UL1598 and UL2239, TUV and CSA Class 3426-01 and Class 3426-81.
NOTES  
Specification Notes

Distortion - 10% Full Power: 2nd Harmonic 3rd Harmonic
500 Hz 1.74% 1.19%
2 kHz 1.18% 0.35%
8 kHz 0.77% 0.04%

Enclosure: UL 94V-0 rated ABS plastic, matte finish, paintable

Finish: White

Grille: Powder coated steel with safety line, black or white finish, paintable

Baffle: Reflex loaded UL 94V-0 rated ABS

Axial Q / DI: 4.7 / 6.7, 500 Hz to 6 kHz

List price: $496.00
Price: $496.00