The H10-G is a very compact industrial compression driver horn. It offers high sound pressure, making this loudspeaker ideally suited for speech and the reproduction of alarm signals. The H10-G is suited for use in both indoor and outdoor direct exposure applications. The H10-G will remain rust free (IP66) with its attached stainless steel bracket. The bracket allows horn rotation of more than 180 degrees. This loudspeaker is constructed of high impact ABS, it is able to withstand even the harshest of elements. The loudspeaker is equipped with a high quality 70 V/100 V transformer with four to five power taps, and can also be used in low impedance (8 Ohm) systems. Our technology avoids any overload of your amplifier by controlling the impedance with driver protection circuitry inside. Optional accessories provide installers with multiple methods for mounting and aiming horn as well as options to help adjust mounting trim height easily. Using the 1/2" NPT conduit adapter allows the installer to run conduit directly to the horn input.
H10-G FEATURES
Cost effective voice paging and signal horn • Rugged construction for industrial applications • IP66 Indoor/Outdoor ready • Permanently attached and water-sealed input wire • Externally accessible 6-position tap switch.
H10G Specifications
Operating Mode Passive with selectable low-impedance or 70 V/100 V operation, Single-amplified with DSP Operating Environment Indoor or Outdoor Direct Exposure Operating Range (-10 dB)2 530 Hz to 6.5 kHz Nominal Beamwidth (H x V) 135° x 135° Transducer MF: 1 x 1.4" (36 mm) voice coil compression driver Sensitivity3 @ 1 m 104 dB (2.83 V) 104 dB (1 W, 8 Ω) Nominal Continuous Power Handling 4 9 V (10 W, 8 Ω rated Impedance) Nominal Maximum SPL5 (Processed) @ 1 m Continuous 113 dB Peak 119 dB Rated Continuous Voltage6 8.9 V (19 dBV) Rated Maximum SPL7 (Processed) @ 1 m Continuous 113 dB Peak 125 dB Transformer 70 V: 10 W, 5 W, 2.5 W, 1.25 W, 0.625 W 100 V: 10 W, 5 W, 2.5 W, 1.25 W Protection Internal DC-blocking capacitor Required Accessories 425 Hz, 6 dB / oct. Butterworth high pass filter; DSP preset Recommended Amplifiers 10 W - 20 W, 8 Ω (9 V - 13 V)
