Available in four sizes, the Desono™ ENT206 models have been expertly engineered to serve the wide range of applications routinely encountered by professional sound contractors. Possessing advanced features, highly focused dispersion patterns, weather resistant construction, and most importantly sonic excellence, ENT200 columns make installations not only fast and simple, but as functionally effective as possible. Double the height of the smaller ENT203, the ENT206 provides directional control at significantly lower frequencies than the ENT203, along with enough power to effectively cover much larger areas while still remaining unobtrusive. The ENT206 employs six high-power LF cone drivers and two CRE (Compact Ribbon Emulator) HF tweeter arrays in a two-way, single-amped configuration. Ideally suited to applications such as music and speech reinforcement for reverberant houses of worship, hotel lobbies, assembly rooms, transit stations, indoor/outdoor swimming pools, outdoor smoking areas, bowling alleys, and much more, the ENT206 is a solid performer that belies its small size. Like the ENT203, the ENT206 also can be utilized to support larger systems for delay and area fill.
ENT206 FEATURES
Zoom Certified • Advanced passive crossover technology and dynamic protection circuitry • Compact Ribbon Emulator high frequency technology for narrow, well-behaved directivity control • All-weather construction for indoor/outdoor use • Simple installation using the included pan-tilt mounting bracket • Selectable low impedance or 70V/100V operation.
ENT206 SPECIFICATIONS
Operating Mode Passive Operating Environment Indoor or outdoor Operating Range2 120 Hz to 22 kHz Nominal Beamwidth (H x V) 140° x 20° Transducers LF 6 x 80 mm long excursion mylar driver HF 2 x 3-element Compact Ribbon Emulator Continuous Power Handling3 @ Nominal Impedance Passive 35 V 150 W @ 8 Ω (600 W peak) Autoformer 70 V 60 W 30 W 15 W 7.5 W 3.75 W 100 V 60 W 30 W 15 W 7.5 W Nominal Sensitivity4 Passive @ 1 W 94 dB @ 2.83 V 94 dB Nominal Maximum SPL5 (Whole Space) Passive Peak 122 dB Continuous 116 dB Equalized Sensitivity6 System @ 1 W 93 dB @ 2.83 V 93 dB Equalized Maximum SPL7 System Peak 121 dB Continuous 115 dB Required Accessories External High Pass Filter - 120 Hz, 24 dB /octave Digital Signal Processor Recommended Amplifiers Passive 150 W - 300 W @ 8 Ω (35 V - 49 V).
PHYSICAL Input Connection NL4-type connector for low impedance operation, and 8-position terminal strip for low impedance or constant voltage operation Mounting Points Small pan-tilt mounting bracket included (14° down-tilt, ± 55° panning) Environmental IP54 per IEC 60529, designed in accordance with MIL-STD-810G Included ABS plastic rain cover with integrated cable inlet and 1" (25.4mm) knockout for conduit ingress Dimensions H x W x D 19.93" x 4.63" x 7.48" (506 mm x 118 mm x 190 mm) Weight 15 lbs (6.8 kg).
