The V2-8 is a two-way, full-range loudspeaker system suitable for use in a wide variety of fixed installations. Compact but powerful, it is ideal for distributed systems such as those found in cafés, restaurants, shopping centers and airports. When paired with a subwoofer such as the V2-210S, a V2-8 system will produce high-fidelity, broad-spectrum sound that belies its modest size. The V2-8 is also an excellent choice for ancillary delay applications. When used to augment a front-of-house system in such venues as auditoria, theaters and houses of worship, delay loudspeakers can significantly even out the difference in sound pressure level from the front of the room to the rear of the room. Units may be positioned for under balcony fill, over balcony fill, or simply placed towards the rear of the seating areas. By deploying V2-8 loudspeakers in such a manner, the system designer will have far greater control over relative levels and relative tonal response when commissioning and equalizing the installation. The V2-8 may be mounted to a wall or ceiling surface using its included yoke bracket, suspended from its M6 threaded rigging points, or installed using a third-party mounting device. It includes a rotatable horn design that allows optimal dispersion in either vertical or horizontal mounting positions. An optional model with a built-in 100W auto former with taps at 100W, 50W, 25W and 12.5W (model V2-8T) is also available from the factory.
V2-8 FEATURES
DYNA-TECH™ driver protection circuitry • Ferrofluid-treated HF driver for improved heat dissipation • Carbon Ring Cone Technology provides 30% more piston area with increased excursion capability • Constant-directivity rotatable square horn • Terminal strip and NL4-compatible connectors • Available in standard black or white finishes • Mounting yoke included with 10° and 20° vertical standoffs • Optional V2-8T auto former model for 70V/100V applications.
V2-8 SPECIFICATIONS
Loudspeaker Type: Compact two-way, full-range, trapezoidal, vented bass, user rotatable horn Operating Range: 70 Hz to 18 kHz (-10 dB) Frequency Response: 100 Hz to 16 kHz (±3 dB) Max Input Ratings: 150W continuous, 375W program 34.6 volts RMS, 69.2 volts momentary peak Sensitivity (1W/1m): 92 dB (100 Hz to 12.5 kHz) free space Maximum Output: 114 dB SPL / 120 dB SPL (peak) Nominal Impedance: 8 ohms Minimum Impedance: 6.1 ohms @ 180 Hz Nominal –6dB Beamwidth: 90° H x 70° V (in vertical position) Crossover Frequency: 1.3 kHz Recommended Signal Processing: 90 Hz, 24 dB/octave Butterworth high pass filter Drivers: LF 1 x 8-inch cone HF 1 x 1-inch Driver Protection: DYNA-TECH protection circuitry Input Connection: NL4-compatible locking connector with terminal strip in parallel Controls: None Enclosure: Trapezoidal (22.5° included angle) 18mm, 11-ply cross-laminated birch Mounting/Rigging Provisions: 9 x M6 threaded rigging fittings 4 x M6 threaded fittings for third-party suspension products Finish: Catalyzed polyester two-part paint, black or white Grille: Powder coated steel, black or white finish Required Accessories: None Supplied Accessories: Yoke-style mounting bracket with optional 10° and 20° standoffs that allow a 10° or 20° downward or upward vertical tilt
