The Crown DCi 8|300N 8-channel Power Amplifier is a 300W, 8-Channel power amplifier with network control. This amp is part of Crown's new DriveCore install series amplifiers.The while line of high performance installation amplifiers is based on the proprietary DriveCore technology. DCi Series amplifiers truly raise the bar with the highest quality standards. They provide system integrators with the advanced features and flexibility that you demand today's challenging sound needs. Versatile, compact and highly energy-efficient are just a few ways to describe the Crown DCi 8|300N 8-channel Power Amplifier. DCi Series amplifiers continue the unbroken Crown tradition of leadership in professional and commercial power amplifier technology.
Crown DCi 8|300N 8-channel Power Amplifier Features:
ANALOG & DIGITAL INPUTS . With digital audio transport via HARMAN’s proprietary BLU-Link, plus balanced analog inputs, Crown DCi 8|300N 8-channel Power Amplifier gives you a tremendous audio advantage – at a much lower cost. The priority input router allows you to specify a primary input, and if audio is lost the amp automatically switches to the other input.
NETWORK MONITORING & CONTROL. Better monitoring, control and audio manipulation with the HiQnet™ protocol that’s over standard TCP/IP. Remotely see how all networked DCi amplifiers are performing and control them as needed. In addition, this allows Audio Architect software and the Powered by Crown app to work with DCi amplifiers. PROGRAMMABLE GENERAL PURPOSE INPUT/OUTPUT PORTS. GPIO ports can be configured in many different ways, such as volume controls, recall presets, or to report errors to a master computer. DIGITAL SIGNAL PROCESSING. DSP capabilities include the following:
- LevelMAX Limiters.
- Input/Output EQ.
- Delay.
- Matrix Mixer.
- Speaker Line Monitoring.
Crown DCi 8|300N 8-channel Power Amplifier Specifications:
-
| Output Channels |
8 |
| Frequency Response (8Ω, 20Hz - 20kHz) |
±0.25dB |
| Total Harmonic Distortion (at full rated power, 20Hz - 20kHz) |
0.35% |
| Damping Factor (20Hz to 100Hz) |
>1000 |
| Load Impedance (Stereo/Dual Mode) |
2Ω - 16Ω; 70Vrms and 100Vrms |
| Load Impedance Bridge Mono |
4Ω - 16Ω; 140Vrms and 200Vrms |
| Cooling |
Continuously variable speed forced air, front to back airflow |
| Maximum Fan Noise (re dBA SPL @ 1M) |
47 |
| Required AC Mains (±10%) |
100V-240V ~ 50/60Hz |
| Power Connector |
15A IEC |
| Dimensions (W x H x D) |
483 mm x 89 mm x 362 mm
19 in x 3.5 in x 14.25 in |
| Weight |
10.66 kg (23.5 lbs) |
