The Crown DCi4 600N Network Amplifier combines DriveCore technology with advanced network monitoring, DSP, and energy-efficient design to deliver superior audio for professional and commercial installations. This 4-channel amplifier powers low-impedance or 70/100V speaker systems with consistent performance, reliability, and flexibility.
Crown DCi4 600N Key Features:
-
Power Ratings: 300W into 2Ω, 600W into 4Ω, 8Ω, 70V, or 100V.
-
DriveCore Technology: Patented Class D PWM design, delivering high efficiency, durability, and audio quality comparable to touring amps.
-
Direct Drive Constant Voltage: Amplification on a per-channel basis without step-up transformers for optimal sound quality.
-
Network Monitoring & Control: TCP/IP-based HiQnet protocol allows remote monitoring, continuous load monitoring, error reporting, and pilot tone monitoring.
-
DSP Capabilities: Includes LevelMAX™ limiters, input/output EQ, and advanced audio routing.
-
BLU Link Compatibility: Low-latency digital audio transport, fault-tolerant, capable of routing 256 channels over Cat 5e cabling up to 100m.
-
Energy-Efficient Cooling: Optimized airflow minimizes noise and heat while maximizing efficiency.
-
Universal AC Input & PFC Power Supply: Works reliably with 100–240VAC, 50/60Hz, providing consistent power anywhere.
Perfect for auditoriums, houses of worship, commercial venues, and professional audio systems, the Crown DCi4 600N Network Amplifier delivers reliable, high-quality sound, networked control, and flexible installation options in a compact, 4-channel design.
Crown DCi4 600N DriveCore Amplifier Specifications:
Dual Mode (All Ch. Driven)
|
2-ohm:
|
300W.
|
|
4-ohm:
|
600W.
|
|
8-ohm:
|
600W.
|
|
16-ohm:
|
300W.
|
|
70Vrms:
|
600W.
|
|
100Vrms:
|
600W.
|
Crown DCi4 600N DriveCore Amplifier Bridge Mono Mode (All Ch. Driven)
|
4-ohm:
|
600W.
|
|
8-ohm:
|
1200W.
|
|
16-ohm:
|
1200W.
|
|
140Vrms:
|
1200W.
|
|
200Vrms:
|
1200W.
|
Crown DCi4 600N DriveCore Amplifier Voltage Gain (max level settings)
|
4/8-ohm Operation:
|
34dB
|
|
70V Operation:
|
34dB
|
|
100V Operation:
|
34dB
|
Crown DCi4 600N DriveCore Amplifier Input Sensitivity
|
2/4/8-ohm:
|
1.4V.
|
|
70V:
|
1.4V.
|
|
100V:
|
2.0V.
|
Crown DCi4 600N DriveCore Amplifier Performance
|
Frequency Response (at 1W, 20 hz - 20 kHz):
|
±0.25dB
|
|
Signal to Noise Ratio (ref. Rated power, 8 Ohms, 20 Hz - 20 kHz):
|
>108dB
|
|
Total Harmonic Distortion (at full rated power, from 20 Hz - 20 kHz):
|
< 0.35%
|
|
Intermodulation Distortion (60Hz and 7 kHz at 4:1, from -30dB to full rated power):
|
?0.35%.
|
|
Damping Factor (20 Hz to 100 Hz):
|
>900.
|
|
Crosstalk (below rated power, 20Hz to 100Hz):
|
>80dB.
|
|
Common Mode Rejection (20 Hz to 100 Hz):
|
>70dB.
|
|
DC Output Offset (with inputs shorted):
|
±10mV.
|
|
Input Impedance (Nomminally balanced, nominally unbalanced):
|
20 kOhms, 10 kOhms.
|
|
Maximimum Input Level Before Compression:
|
20dbu.
|
|
Maximimum Input Level Before Clipping:
|
26dbu.
|
|
Required AC Mains (±15%):
|
100V - 240V, 60/50Hz.
|
|
Cooling:
|
Continuously variable speed forced air, front-to-back airflow
|
|
Load Impedance Stereo/Dual Mode:
|
2 - 16Ohms; 70Vrms and 100Vrms
|
|
Load Impedance Bridge Mono:
|
4 - 16Ohms; 70Vrms and 100Vrms.
|
Crown DCi4 600N DriveCore Amplifier Dimensions
|
Width:
|
19 in. (48.3 cm).
|
|
Height:
|
3.5 in. (8.9 cm).
|
|
Depth:
|
14.25 in. (36.2 cm).
|
|
Weight:
|
20.1 lbs (9.1 kgs).
|
