The Crown XFMR-4 is a professional four-channel output transformer designed to connect compatible Crown ComTech DriveCore amplifiers to 70V and 100V distributed loudspeaker systems. This rackmount transformer accessory provides the impedance matching needed to use supported low-impedance amplifier outputs with commercial constant-voltage speaker installations.
Designed specifically for the ComTech DriveCore Series, the XFMR-4 provides a practical solution for commercial audio systems requiring multiple distributed speaker circuits. Rather than replacing an existing compatible amplifier with a dedicated constant-voltage model, installers can use the XFMR-4 to adapt the amplifier for supported 70V or 100V applications.
The transformer provides four channels of impedance matching, allowing compatible ComTech DriveCore amplifiers to power distributed audio systems commonly found in retail stores, offices, educational facilities, houses of worship, and hospitality environments.
With a maximum input rating of 32Vrms/125W, a specified insertion loss of no more than 1.0 dB at 70VAC, and a frequency response of ±1.0 dB from 70 Hz to 15 kHz, the XFMR-4 is designed to provide dependable audio signal transfer for commercial sound distribution.
The unit features pluggable barrier block output connectors accepting wire up to 14 AWG and includes jumper cables for connection to compatible Crown ComTech DriveCore amplifiers.
Its rackmount chassis provides a convenient installation option for commercial equipment rooms and professional audio racks.
Features & Benefits
Four Channels of Constant-Voltage Impedance Matching
The Crown XFMR-4 provides four independent transformer channels for compatible distributed audio applications.
Each channel allows a supported ComTech DriveCore amplifier output to interface with an appropriately configured constant-voltage loudspeaker circuit.
This is particularly useful when multiple speaker zones or separate distributed audio circuits are required.
70V and 100V Distributed Audio Compatibility
The XFMR-4 enables compatible ComTech DriveCore amplifiers to operate with 70Vrms and 100Vrms distributed loudspeaker systems.
Constant-voltage audio distribution is commonly used in commercial facilities where multiple transformer-equipped loudspeakers share an amplifier circuit.
The XFMR-4 provides the output transformation required for supported installations without requiring an amplifier with built-in direct-drive constant-voltage capability.
Designed for Crown ComTech DriveCore Amplifiers
Unlike general-purpose audio transformers, the XFMR-4 is designed specifically for Crown's ComTech DriveCore amplifier family.
This provides an integration option for compatible amplifiers that do not include native 70V/100V outputs.
Amplifier model compatibility, available output power, and transformer configuration should be confirmed before installation.
Simplifies Commercial Speaker Distribution
The XFMR-4 helps installers adapt supported amplifier systems for distributed loudspeaker installations.
This can be useful in facilities where multiple ceiling speakers, wall-mounted loudspeakers, or other transformer-equipped commercial speakers must operate on a common circuit.
Each connected speaker's transformer tap setting must be considered when calculating the total load.
Low Insertion Loss
Crown specifies a maximum insertion loss of 1.0 dB at 70VAC.
This helps minimize signal loss through the transformer while providing the impedance conversion needed for constant-voltage distribution.
Frequency Response for Commercial Audio
The XFMR-4 provides a specified frequency response of ±1.0 dB from 70 Hz to 15 kHz.
This performance range is suitable for many distributed commercial audio applications involving speech, paging, and background music.
Included Amplifier Jumper Cables
The XFMR-4 includes jumper cables designed to simplify connection with compatible ComTech DriveCore amplifiers.
These cables help streamline installation and reduce the need to source separate amplifier-to-transformer connections.
Pluggable Barrier Block Connections
The transformer uses pluggable barrier block output connectors that accept wire up to 14 AWG.
These connectors provide a practical termination method for professional installed audio wiring.
Rackmount Design
The XFMR-4 features a rackmount chassis measuring 19 inches wide, 1.72 inches high, and 15.6 inches deep.
Its compact height allows installation alongside compatible Crown amplifiers and other commercial audio equipment.
The unit weighs approximately 17 pounds.
Key Features
-
Four-channel output transformer for distributed audio
-
Designed for compatible Crown ComTech DriveCore amplifiers
-
Enables 70Vrms and 100Vrms constant-voltage operation
-
Provides impedance matching for supported amplifier outputs
-
Suitable for multichannel commercial speaker systems
-
Maximum input rating of 32Vrms/125W
-
Frequency response of ±1.0 dB from 70 Hz to 15 kHz
-
Maximum insertion loss of 1.0 dB at 70VAC
-
Pluggable barrier block output connectors
-
Accepts speaker wire up to 14 AWG
-
Includes jumper cables for compatible amplifier connections
-
Professional rackmount construction
-
Approximately 1RU chassis height
-
Designed for commercial distributed loudspeaker installations
Ideal Applications
Retail Stores and Shopping Facilities
The XFMR-4 allows compatible Crown ComTech DriveCore amplifiers to support distributed ceiling and wall-mounted loudspeakers for background music and announcements.
Houses of Worship
For worship facilities using distributed speaker circuits, the XFMR-4 provides an option for connecting compatible ComTech DriveCore amplification to 70V or 100V loudspeaker systems.
Corporate Offices
The transformer can be used in professionally designed office audio systems requiring distributed background music, speech reinforcement, or paging.
Educational Facilities
Schools and institutional buildings can use the XFMR-4 in compatible commercial audio installations serving classrooms, hallways, and common areas.
Hospitality Environments
Hotels, restaurants, and other hospitality facilities can use the XFMR-4 for supported multizone distributed speaker installations.
Commercial Paging and Background Music
The XFMR-4 is well suited for compatible constant-voltage systems where multiple transformer-equipped speakers must be connected to supported amplifier channels.
Crown XFMR-4 Technical Specifications
|
Specification
|
Details
|
|
Manufacturer
|
Crown Audio
|
|
Model
|
XFMR-4
|
|
Product Type
|
Four-channel output transformer
|
|
Compatible Amplifier Family
|
Crown ComTech DriveCore Series
|
|
Transformer Channels
|
4
|
|
Output System Type
|
Constant-voltage distributed audio
|
|
Supported Constant-Voltage Outputs
|
70Vrms / 100Vrms
|
|
Maximum Input
|
32Vrms / 125W
|
|
Frequency Response
|
±1.0 dB, 70 Hz–15 kHz
|
|
Insertion Loss
|
≤1.0 dB maximum at 70VAC
|
|
Output Connectors
|
Pluggable barrier block
|
|
Maximum Wire Size
|
14 AWG
|
|
Included Connections
|
Amplifier jumper cables
|
|
Mounting
|
Rackmount
|
|
Width
|
19 inches (48.3 cm)
|
|
Height
|
1.72 inches (4.4 cm)
|
|
Depth
|
15.6 inches (39.7 cm)
|
|
Net Weight
|
17 lbs (7.7 kg)
|
Installation and Compatibility
The Crown XFMR-4 is intended for use with compatible Crown ComTech DriveCore amplifiers that require external output transformers for 70V or 100V distributed loudspeaker operation.
Before installation, confirm that the amplifier model supports the XFMR-4 and that the selected transformer configuration matches the intended loudspeaker system.
The XFMR-4 provides four transformer channels, making it suitable for supported multichannel applications.
For constant-voltage systems, the total wattage of connected loudspeaker transformer taps must remain within the allowable amplifier and transformer ratings. Appropriate system headroom should also be considered.
The included jumper cables provide the connection between the compatible amplifier and transformer unit, while the pluggable barrier block connectors accommodate the distributed speaker wiring.
The XFMR-4 should be installed according to Crown's approved wiring instructions and the requirements of the connected amplifier and loudspeaker system.
Important: The XFMR-4 is a passive output transformer accessory. It does not generate amplifier power or operate as a standalone power amplifier.
Why Buy the Crown XFMR-4 from Audio Supply?
Audio Supply offers professional Crown amplifiers and commercial audio accessories for installed sound systems. The XFMR-4 provides a practical way to adapt compatible ComTech DriveCore amplifiers for 70V/100V distributed loudspeaker applications.