The Crown XLC 2500 Two-Channel Power Amplifier is a compact, powerful, and cost-effective solution for cinema and installed sound applications. Available in two models – the XLC2500 (500W per channel at 4 ohms) and the XLC2800 (800W per channel at 4 ohms) – these amplifiers utilize Crown’s proprietary DriveCore™ Technology, delivering high efficiency and reduced size without sacrificing performance.
Lightweight and reliable, the XLC Series is designed for ease of installation while providing audiophile-quality sound. The amplifiers are compatible with CXM2000 and Crown Monitor System DSi-8M for monitoring, fault detection, and crossover management. Flexible output and input configurations support stereo, bridge, and parallel operation, making the XLC 2500 a versatile solution for cinema, commercial, and professional audio environments.
Crown XLC 2500 Key Features
Cinema Applications
-
Two models: XLC2500 (500W per channel) and XLC2800 (800W per channel) at 4 ohms
-
Compatible with CXM2000 for monitor, fault detection, and crossover functions
-
Compatible with Crown Monitor System DSi-8M for monitoring
-
Supports 2-ohm, 4-ohm, and 8-ohm outputs in stereo and bridge modes
-
Parallel connection support for cinema surround speakers
-
Front panel indicators for Power, Signal, Clip, and Fault
-
Rear panel volume control for easy adjustments
-
High-performance yet lightweight design (<14 lbs / 6 kg)
Installed Sound Applications
-
Minimal front panel controls; all connectors and controls at the rear
-
Configurable input operation: stereo, parallel, bridge modes
-
Configurable output operation: stereo and bridge modes
-
DriveCore™ based amplifier ensures extremely high reliability and audiophile sound quality
SPECIFICATIONS:
|
AC Line Voltage and Frequency Configurations Available
|
( /- 10%) 100VAC 50/60 Hz, 110VAC 60 Hz, 220 and 230~240VAC 50 Hz
|
|
Voltage Gain
|
35
|
|
Sensitivity
|
1.4V (for full rated power at 4 ohms)
|
|
Signal to Noise Ratio
|
(ref. rated power, 8 ohms, 1 kHz) > 103 dB
|
|
THD
|
<0.5%
|
|
Damping Factor
|
(8 ohms, 10 Hz to 400 Hz) >200
|
|
Intermodulation Distortion
|
(from full rated output to -30 dB) <0.3%
|
|
Frequency Response (at 1W, 20 Hz - 20 kHz)
|
0 dB
|
|
Crosstalk
|
>85 dB (below rated 8 ohms power, at 1 kHz); >55 dB (below rated 8 ohms power, at 20 kHz)
|
|
Input Impedance (nominal)
|
20 kilohms balanced, 10 kilohms unbalanced
|
|
Load Impedance
|
2~8 ohms per channel in Stereo; 4~8 ohms in Bridge
|
|
Dimensions
|
19" x 3.5" x 8" (48.3cm x 8.9cm x 20.6cm)
|
|
Weight
|
8.3 lbs (3.75 kg)
|
|
Shipping Weight
|
10.7 lbs (4.85 kg)
|
|
IEC Power Connector
|
15A
|
