The Crown XTi 1002 is a professional two-channel power amplifier designed for live sound reinforcement, portable PA systems, and permanent audio installations. Part of Crown's XTi 2 Series, the XTi 1002 combines dependable output power with integrated digital signal processing, configurable speaker protection, and flexible system control.
Delivering 500 watts per channel at 4 ohms, the XTi 1002 provides the amplification needed for compatible passive loudspeakers in performance venues, houses of worship, school auditoriums, and touring sound systems. Its built-in DSP functions allow users to manage amplifier output and tailor system performance without relying entirely on separate external processing equipment.
The amplifier features Crown's Peakx Plus limiters, offering adjustable threshold, attack, and release settings to help manage output levels and protect connected loudspeakers. An enhanced subharmonic synthesizer provides additional low-frequency processing options, with adjustable frequency, gain, and filter type for system-specific tuning.
For demanding applications, the XTi 1002 includes three selectable fan operating modes, allowing users to adjust cooling behavior according to the installation environment. Software monitoring also provides visibility into AC line voltage and power supply temperature.
With support for up to 50 presets, including 49 user-definable configurations, the XTi 1002 makes it easier to maintain consistent amplifier settings across different sound systems or venues.
Integrated cast-aluminum handles, a locking power cord clip, and a standard 2RU rackmount chassis make the amplifier practical for both portable and installed applications.
Features & Benefits
Reliable Two-Channel Amplification
The Crown XTi 1002 provides two independent amplifier channels for compatible professional loudspeaker systems.
Its rated output capabilities include:
-
700W per channel at 2Ω
-
500W per channel at 4Ω
-
275W per channel at 8Ω
These power ratings allow the amplifier to accommodate a variety of low-impedance speaker configurations.
The XTi 1002 is suitable for systems requiring dependable amplification with integrated signal processing and adjustable output protection.
Integrated Digital Signal Processing
The XTi 1002 includes onboard DSP functionality for configuring amplifier performance and managing connected loudspeakers.
This integrated processing helps simplify system setup and provides control over supported audio parameters without requiring a separate processor for every application.
For portable sound systems and fixed installations, built-in DSP can reduce equipment complexity while providing useful system tuning capabilities.
Crown Peakx Plus Limiters
The amplifier incorporates Crown Peakx Plus limiting technology.
Unlike basic output limiting, Peakx Plus provides user-adjustable control over important limiting parameters, including:
These settings allow sound system technicians to tailor limiting behavior to the requirements of compatible loudspeakers.
Proper limiter configuration can help reduce the risk of excessive amplifier output and support more consistent system operation.
Enhanced Subharmonic Synthesizer
The Crown XTi 1002 includes an enhanced subharmonic synthesizer for applications requiring additional low-frequency processing.
Users can adjust frequency, gain, and filter type to suit the connected loudspeaker system.
This feature provides additional flexibility when tuning compatible low-frequency loudspeakers and professionally configured PA systems.
Three Selectable Cooling Modes
The XTi 1002 offers three user-configurable fan operating modes:
-
Normal: Standard cooling behavior for typical operation.
-
Early: Adjusts fan response for applications requiring earlier cooling intervention.
-
Full Speed: Operates the cooling system continuously at full speed.
These options allow installers and technicians to select cooling behavior appropriate for the equipment environment.
Adequate ventilation remains essential regardless of the selected mode.
Software-Based System Monitoring
The amplifier supports monitoring of important operating information through compatible Crown control software.
Available monitoring includes:
-
AC line voltage
-
Power supply temperature
This information can help technicians evaluate operating conditions and troubleshoot potential system issues.
HiQnet System Architect Control
The XTi 1002 supports Crown's HiQnet System Architect software for compatible amplifier configuration and monitoring.
Software control provides additional flexibility when managing DSP settings, amplifier presets, and supported operating parameters.
This is especially useful for technicians working with multiple amplifiers or maintaining consistent settings across installations.
Up to 50 Amplifier Presets
The XTi 1002 supports a total of 50 presets, including 49 user-definable configurations.
Presets allow users to store amplifier settings for different loudspeaker systems or applications.
This is particularly helpful for mobile sound companies using the same amplifier with different speaker configurations.
Integrated Cast-Aluminum Handles
The amplifier features cast-aluminum front-panel handles for easier handling and improved durability.
These handles are useful when installing equipment in racks or transporting amplifier systems between venues.
Locking Power Cord Clip
The Crown XTi 1002 includes a locking power cord clip designed to help prevent accidental disconnection.
This provides additional connection security in portable sound systems and professional equipment racks.
Rackmount Design for Professional Audio
The amplifier features a standard 19-inch rackmount chassis with a height of 3.5 inches.
Its 12.25-inch depth makes it suitable for many professional equipment racks, while its 18.5-pound weight provides a manageable option for portable and installed systems.
Key Features
-
Professional two-channel Crown XTi 2 Series power amplifier
-
700W per channel at 2Ω
-
500W per channel at 4Ω
-
275W per channel at 8Ω
-
Integrated digital signal processing
-
Crown Peakx Plus adjustable output limiters
-
User control over limiter threshold, attack, and release
-
Enhanced subharmonic synthesizer
-
Adjustable subharmonic frequency, gain, and filter type
-
Three selectable cooling fan modes
-
Normal, Early, and Full Speed fan settings
-
Software monitoring of AC line voltage
-
Software monitoring of power supply temperature
-
Compatible with Crown HiQnet System Architect
-
Up to 50 amplifier presets
-
49 user-definable preset configurations
-
Integrated cast-aluminum handles
-
Locking power cord clip
-
Signal-to-noise ratio of 100 dB, A-weighted
-
Total harmonic distortion below 0.5%
-
Standard 2RU rackmount chassis
-
15A IEC power connector
-
Suitable for live sound and installed audio applications
Ideal Applications
Live Sound Reinforcement
The Crown XTi 1002 is suitable for musicians, sound engineers, and performance venues using compatible passive loudspeakers.
Its integrated DSP and adjustable limiters provide useful control for professional sound reinforcement systems.
Touring and Portable PA Systems
For mobile sound companies, the XTi 1002 combines amplifier power, built-in processing, and durable construction.
The integrated handles and locking power cord clip are especially useful in equipment racks that are transported regularly.
Houses of Worship
Churches and worship facilities can use the XTi 1002 in professionally designed sound systems requiring dependable amplification and configurable loudspeaker processing.
School Auditoriums
The amplifier is suitable for educational facilities using passive loudspeakers for assemblies, performances, and presentations.
Its preset capabilities help maintain consistent settings when equipment is used for different events.
Small and Medium-Sized Performance Venues
Clubs, theaters, and entertainment spaces can use the XTi 1002 for compatible low-impedance loudspeaker systems.
Built-in processing and monitoring provide useful options for system configuration and maintenance.
Commercial Installed Audio
The XTi 1002 can be integrated into permanent professional sound systems where two-channel amplification, adjustable limiting, and DSP control are required.
Crown XTi 1002 Technical Specifications
|
Specification
|
Details
|
|
Manufacturer
|
Crown Audio
|
|
Model
|
XTi 1002 / XTi1002
|
|
Series
|
XTi 2
|
|
Product Type
|
Two-channel power amplifier with DSP
|
|
Number of Channels
|
2
|
|
Rated Power at 2Ω
|
700W per channel
|
|
Rated Power at 4Ω
|
500W per channel
|
|
Rated Power at 8Ω
|
275W per channel
|
|
Input Sensitivity
|
1.4V
|
|
Signal-to-Noise Ratio
|
100 dB, A-weighted, referenced to rated 8Ω power at 1 kHz
|
|
Total Harmonic Distortion
|
Less than 0.5%
|
|
Frequency Response
|
+0 dB, −1 dB at 1W, 20 Hz–20 kHz
|
|
Crosstalk
|
Greater than 70 dB, 20 Hz–1 kHz, below rated power
|
|
Signal Processing
|
Integrated DSP
|
|
Output Limiting
|
Crown Peakx Plus
|
|
Limiter Adjustments
|
Threshold, attack, release
|
|
Subharmonic Processing
|
Adjustable frequency, gain, and filter type
|
|
Fan Modes
|
Normal, Early, Full Speed
|
|
System Monitoring
|
AC line voltage, power supply temperature
|
|
Control Software
|
Crown HiQnet System Architect
|
|
Preset Capacity
|
50 total
|
|
User-Definable Presets
|
49
|
|
Power Connector
|
15A IEC
|
|
Rack Height
|
2RU
|
|
Height
|
3.5 inches (8.9 cm)
|
|
Width
|
19 inches (48.3 cm)
|
|
Depth
|
12.25 inches (31.1 cm)
|
|
Net Weight
|
18.5 lbs (8.4 kg)
|
|
Shipping Weight
|
21.5 lbs (9.8 kg)
|
Installation and Compatibility
The Crown XTi 1002 is designed for professional audio systems using compatible passive low-impedance loudspeakers.
Its output power varies according to the connected speaker impedance, with published stereo ratings at 2Ω, 4Ω, and 8Ω.
Before installation, verify the loudspeaker impedance, power handling, amplifier configuration, and appropriate system headroom.
The integrated DSP provides processing options for tuning the amplifier to the connected loudspeaker system.
Crown Peakx Plus limiters can be configured to help control output levels, while the subharmonic synthesizer offers additional low-frequency processing when appropriate.
For installations using multiple amplifiers, compatible HiQnet System Architect software can assist with configuration, preset management, and supported monitoring functions.
The amplifier should be installed with appropriate rack ventilation and electrical power capacity. Cooling fan settings should be selected according to the operating environment and Crown's installation recommendations.
Need More Amplifier Power?
For applications requiring additional output power, consider the Crown XTi 2002 Two-Channel Power Amplifier with DSP. Delivering 800 watts per channel at 4 ohms, the XTi 2002 offers greater output capacity while retaining the integrated DSP, Peakx Plus limiters, and advanced system control features of the XTi 2 Series.
It's an excellent upgrade option for compatible passive loudspeaker systems requiring additional amplifier power.
Why Buy the Crown XTi 1002 from Audio Supply?
Audio Supply offers professional Crown amplifiers and sound reinforcement equipment for live venues, houses of worship, and commercial installations. The XTi 1002 combines dependable two-channel amplification, integrated DSP, and adjustable speaker protection for versatile professional audio systems.