The dbx 234s is a professional analog crossover designed to improve the performance of multi-amplifier loudspeaker systems. Supporting stereo 2-way, stereo 3-way, and mono 4-way operation, it provides flexible frequency management for live sound reinforcement, DJ systems, touring applications, and permanent audio installations.
Using precision 24 dB/octave Linkwitz-Riley filters, the dbx 234s divides a line-level audio signal into separate frequency bands for low-, mid-, and high-frequency loudspeaker sections. This allows each amplifier and speaker section to reproduce its intended frequency range, helping improve system clarity and reduce unwanted frequency overlap.
The 234s features independent output level controls, selectable crossover frequency ranges, output polarity reversal, and a switchable 40 Hz low-cut filter. An optional low-frequency summing function also supports systems requiring a mono subwoofer signal.
Professional balanced 1/4-inch TRS connections, clearly labeled controls, and a compact 1RU rackmount chassis make the dbx 234s a practical solution for both portable and installed sound systems.
Features & Benefits
Flexible 2-Way, 3-Way, and 4-Way Operation
The dbx 234s supports three crossover configurations:
-
Stereo 2-Way: Separates left and right signals into low- and high-frequency outputs.
-
Stereo 3-Way: Divides each stereo channel into low-, mid-, and high-frequency outputs.
-
Mono 4-Way: Separates a mono signal into four frequency bands for more complex loudspeaker systems.
These operating modes provide flexibility for different active loudspeaker configurations.
24 dB/Octave Linkwitz-Riley Filters
The 234s uses Linkwitz-Riley crossover filters with 24 dB/octave slopes. These filters provide controlled frequency separation between connected loudspeaker sections.
Proper crossover configuration helps reduce unnecessary frequency overlap and supports smoother system integration.
Adjustable Crossover Frequencies
Selectable x1 and x10 frequency ranges allow technicians to configure crossover points for different loudspeaker requirements.
The adjustable low-frequency crossover range extends from 45 Hz to 960 Hz, or from 450 Hz to 9.6 kHz when the x10 setting is engaged.
Other crossover frequency controls provide adjustment up to 9.6 kHz, depending on the selected operating mode.
Independent Output Level and Polarity Controls
Individual output level controls allow technicians to balance the relative levels of connected loudspeaker sections.
Each output also includes a polarity inversion switch, providing additional flexibility when aligning the system.
40 Hz Low-Cut Filter
The switchable 40 Hz Butterworth high-pass filter provides a 12 dB/octave slope to help reduce unwanted low-frequency energy.
This feature can be useful when protecting compatible loudspeakers from frequencies below their intended operating range.
Mono-Summed Subwoofer Output
The optional LF Sum function combines low-frequency information for mono subwoofer operation.
This allows the 234s to accommodate systems using a shared subwoofer channel rather than separate left and right low-frequency outputs.
Professional Balanced Connections
The dbx 234s features electronically balanced/unbalanced 1/4-inch TRS inputs and impedance-balanced/unbalanced outputs.
RF filtering helps reduce susceptibility to interference, while status LEDs provide visual confirmation of selected operating functions.
Key Features
-
Stereo 2-way, stereo 3-way, and mono 4-way operation
-
24 dB/octave Linkwitz-Riley crossover filters
-
Adjustable crossover frequency controls
-
x10 crossover frequency range switches
-
Independent output level controls
-
Polarity inversion on every output
-
Switchable 40 Hz Butterworth low-cut filters
-
Optional mono-summed low-frequency output
-
Balanced 1/4-inch TRS inputs and outputs
-
Stereo/mono and function status LEDs
-
Dynamic range greater than 106 dB
-
Compact 1RU rackmount construction
Ideal Applications
The dbx 234s is suitable for professional sound systems requiring active frequency management, including:
-
Live bands and touring PA systems
-
DJ and mobile sound reinforcement
-
Houses of worship
-
Theater and auditorium installations
-
Multi-amplifier loudspeaker systems
-
Active subwoofer and full-range speaker configurations
dbx 234s Technical Specifications
|
Specification
|
Details
|
|
Manufacturer
|
dbx Professional
|
|
Model
|
234s
|
|
Product Type
|
Analog Active Crossover
|
|
Operating Modes
|
Stereo 2-way, stereo 3-way, mono 4-way
|
|
Input Connectors
|
1/4" TRS
|
|
Input Type
|
Electronically balanced/unbalanced, RF filtered
|
|
Input Impedance
|
Greater than 50kΩ balanced; greater than 25kΩ unbalanced
|
|
Maximum Input Level
|
Greater than +22 dBu
|
|
CMRR
|
Greater than 40 dB; typically greater than 55 dB at 1 kHz
|
|
Output Connectors
|
1/4" TRS
|
|
Output Type
|
Impedance-balanced/unbalanced, RF filtered
|
|
Output Impedance
|
200Ω balanced; 100Ω unbalanced
|
|
Maximum Output Level
|
Greater than +21 dBu into 2kΩ or greater
|
|
Bandwidth
|
20 Hz–20 kHz, ±0.5 dB
|
|
Frequency Response
|
Below 3 Hz to above 90 kHz, +0/−3 dB
|
|
Dynamic Range
|
Greater than 106 dB, unweighted
|
|
THD + Noise
|
Less than 0.004% at +4 dBu, 1 kHz; less than 0.04% at +20 dBu, 1 kHz
|
|
Interchannel Crosstalk
|
Less than −80 dB, 20 Hz–20 kHz
|
|
Stereo Low/High or Low/Mid Crossover
|
45–960 Hz or 450 Hz–9.6 kHz with x10
|
|
Stereo Mid/High Crossover
|
450 Hz–9.6 kHz
|
|
Mono Low/Low-Mid Crossover
|
45–960 Hz or 450 Hz–9.6 kHz with x10
|
|
Mono Low-Mid/High-Mid Crossover
|
450 Hz–9.6 kHz
|
|
Mono High-Mid/High Crossover
|
450 Hz–9.6 kHz
|
|
Crossover Filter Type
|
Linkwitz-Riley, 24 dB/octave
|
|
Low-Cut Filter
|
40 Hz Butterworth, 12 dB/octave
|
|
Output Polarity
|
Individually switchable
|
|
LF Sum
|
Selectable mono low-frequency summing
|
|
Stereo SNR
|
Greater than 94 dB low; 93 dB mid; 90 dB high
|
|
Mono SNR
|
Greater than 94 dB low and low-mid; 92 dB high-mid; 88 dB high
|
|
Operating Voltage
|
Region-specific 100V, 120V, or 230V AC versions
|
|
Operating Temperature
|
32°F–113°F (0°C–45°C)
|
|
Power Consumption
|
15W
|
|
Power Connector
|
IEC receptacle
|
|
Rack Height
|
1RU
|
|
Dimensions
|
19"W × 1.75"H × 6.9"D
|
|
Net Weight
|
4.0 lbs (1.8 kg)
|
|
Shipping Weight
|
5.8 lbs (2.6 kg)
|
Installation and Compatibility
The dbx 234s is designed for professional line-level audio systems using separate amplifier channels for different loudspeaker frequency bands.
Connect the crossover between a compatible mixer or audio processor and the power amplifiers feeding the appropriate loudspeaker sections.
Select the correct operating mode, crossover frequencies, and output levels according to the connected loudspeaker specifications.
Important: The dbx 234s is a signal processor, not a power amplifier. It does not directly power passive loudspeakers.
Need XLR Connections?
For installations that prefer balanced XLR connections, consider the dbx 234xs Stereo 2/3-Way and Mono 4-Way Crossover. It offers similar crossover flexibility, including 24 dB/octave Linkwitz-Riley filters, independent output level controls, and multiple operating modes, with XLR inputs and outputs instead of 1/4-inch TRS connections.
Why Buy the dbx 234s from Audio Supply?
Audio Supply offers professional dbx signal processing equipment for live sound and installed audio systems. The dbx 234s provides flexible crossover configuration, precise analog filtering, and straightforward controls for multi-amplifier loudspeaker applications.