The JBL Control 65P/T is a professional compact pendant loudspeaker designed to deliver clear, consistent sound in commercial spaces with open ceilings or exposed architectural structures. Featuring JBL's Radiation Boundary Integrator® (RBI) technology and a 120° conical coverage pattern, the Control 65P/T provides wide, even sound distribution for background music, paging, and distributed audio systems.

With a 5.25-inch low-frequency driver, integrated high-frequency driver, and built-in 60-watt multi-tap transformer, this pendant speaker combines full-range audio performance with flexible installation options. Its contemporary hanging design makes it especially suitable for restaurants, retail stores, hotels, offices, and other commercial environments where traditional ceiling speakers may not be practical.

Wide, Consistent Coverage with JBL RBI Technology

The JBL Control 65P/T uses Radiation Boundary Integrator® technology to provide smooth sound distribution throughout the listening area. Its wide 120° conical coverage helps distribute music and announcements evenly across open spaces.

This broad dispersion can be especially beneficial in commercial installations where consistent sound coverage and speech intelligibility are important.

Flexible 70V/100V and 8-Ohm Operation

The JBL Control 65P/T features an integrated 60-watt multi-tap transformer for use with commercial 70V and 100V distributed audio systems.

For installations using conventional low-impedance amplification, the speaker also supports 8-ohm operation.

This flexibility allows system designers to incorporate the Control 65P/T into a variety of commercial sound reinforcement and background music applications.

Designed for Open-Ceiling Commercial Installations

Unlike traditional in-ceiling speakers, the JBL Control 65P/T hangs from the ceiling using its included suspension cable system.

The pendant design is particularly useful in spaces with exposed ductwork, high ceilings, or architectural features that make flush-mounted loudspeakers impractical.

Two suspension cable assemblies are included, providing primary and secondary safety suspension for appropriate installations.

JBL Control 65P/T Key Features

  • Compact Pendant Design: Ideal for open-ceiling and exposed-structure commercial environments
  • JBL RBI Technology: Radiation Boundary Integrator technology provides smooth, consistent sound coverage
  • 120° Conical Coverage: Wide dispersion for background music and paging
  • 5.25-Inch Low-Frequency Driver: Delivers balanced low- and mid-frequency reproduction
  • Integrated High-Frequency Driver: Supports clear vocals and detailed music playback
  • 60W Multi-Tap Transformer: Supports 70V and 100V distributed audio systems
  • 8-Ohm Operation: Compatible with appropriately matched low-impedance amplifiers
  • Included Suspension Hardware: Primary and secondary cable suspension systems
  • Durable Construction: High-impact polystyrene enclosure and protective steel grille
  • Paintable Finish: Available in black or white to complement architectural designs
  • IP44 Capability: Splash-resistant construction for suitable protected installations

JBL Control 65P/T Technical Specifications

Specification Details
Frequency Range (-10 dB) 55 Hz – 20 kHz
Frequency Response (±3 dB) 78 Hz – 18 kHz
Power Rating 75W continuous pink noise / 150W continuous program / 300W peak
Nominal Sensitivity 86 dB
Coverage Angle 120° conical
Directivity Factor (Q) 5.3
Directivity Index (DI) 7.2 dB
Maximum SPL (1m) 105 dB continuous / 111 dB peak
Nominal Impedance 8 ohms
Transformer Taps (70V) 60W, 30W, 15W, 7.5W
Transformer Taps (100V) 60W, 30W, 15W
Transformer Insertion Loss 0.5 dB @ 7.5W; 0.5 dB @ 15W; 0.6 dB @ 30W; 0.7 dB @ 60W
Low-Frequency Driver 130 mm (5¼ in) polypropylene-coated paper cone, pure butyl rubber surround, 25 mm (1 in) copper voice coil, vented fiberglass-resin voice-coil former
High-Frequency Driver 20 mm (¾ in) textile soft dome, neodymium magnet assembly, ferrofluid cooling, aluminum voice-coil former
Enclosure High-impact polystyrene
Grille Zinc-plated steel with powder-coat finish and removable foam backing for painting
Outdoor Capability Exceeds MIL-STD-810 environmental requirements for humidity, salt spray, temperature, and UV; IP44 splashproof capability per IEC 529
Input Connectors Two removable locking 2-pin Euroblock connectors with screw terminals, wired in parallel for input and loop-through; maximum 12 AWG (2.5 mm²) wire; rubber covers included
Suspension System Two independent suspension systems (primary and safety), each with a 15 ft (4.5 m) galvanized-steel cable, spring clips, and adjustable Gripple fasteners; safe working load 99 lb (45 kg) per cable
Safety Certifications Speaker UL1480; transformer UL1876; IEC60849/EN60849; suspension hardware UL1598, UL2239, TÜV, and CSA Class 3426-01 / 3426-81
Dimensions 9.3 in (234 mm) diameter × 10.2 in (259 mm) cabinet height; 11.0 in (279 mm) to top of suspension bracket
Net Weight 8 lbs (3.7 kg) each
Shipping Weight 19 lbs (8.7 kg) per pair
Included Accessories Two suspension cable systems, two removable locking 2-pin Euroblock connectors, and two rubber connector covers
Optional Accessories JBL MTC-PC60 top panel / terminal cover
Available Colors Black or white (-WH); paintable

These specifications are based on the table you provided, with formatting cleaned up for readability.

Recommended Applications

The JBL Control 65P/T is well suited for:

  • Restaurants, cafés, and hospitality spaces
  • Retail stores and shopping centers
  • Hotels, lobbies, and common areas
  • Offices and commercial buildings
  • Museums, galleries, and visitor centers
  • Fitness facilities and recreational spaces
  • Commercial background music and paging systems

Why Buy the JBL Control 65P/T from Audio Supply?

Audio Supply offers professional JBL loudspeakers and commercial audio equipment for contractors, system integrators, and facility managers. We can help you select compatible amplification and accessories for your JBL Control 65P/T installation.

List price: $330.00
Price: $275.00