The Listen LR-5200-216 RF Receiver provides high-performance audio and outstanding reception in a compact, easy-to-wear design. Ideal for classrooms, lecture halls, theaters, houses of worship, and other venues, this receiver offers best-in-class sensitivity and ultra-low noise, making it a reliable choice for assistive listening applications.
Equipped with an integrated neck loop and lanyard with DSP loop driver, the LR-5200-216 delivers an enhanced T-coil listening experience for users with hearing aids. Its OLED display provides at-a-glance information on channel selection, battery level, and volume, while a micro-USB connection allows for fast charging and convenient firmware updates via free iDSP software. Advanced rechargeable battery technology ensures long-lasting power while reducing operating costs, making this receiver an economical and environmentally friendly solution.
Compact, reliable, and user-friendly, the LR-5200-216 is an excellent choice for venues looking to expand or upgrade their assistive listening systems.
LISTEN LR-5200-216 Highlights
-
Ultra-sensitive RF receiver with best-in-class reception and lowest noise
-
Compact, lightweight design for easy wear, storage, and maintenance
-
Advanced rechargeable battery for extended use and cost savings
-
Integrated neck loop and DSP loop driver for T-coil-equipped hearing aids
-
OLED display shows channel status, battery level, volume, and more
-
Ideal for classrooms, conferences, theaters, and houses of worship
LISTEN LR-5200-216 Specifications
+Audio
|
System Distortion
|
< 2% total harmonic distortion (THD) at 80% deviation
|
|
Output/s
|
Two (2) 3.5 mm (0.14 in.) connectors, unbalanced, 0 dBu nominal output level, 16 mW maximum, impedance 32 ohm
|
|
System Frequency Response
|
50 Hz - 15 kHz (±3 dB)
|
|
System Signal to Noise Ratio
|
SQ enabled 70 dB, SQ disabled 50 dB
|
+Controls
|
User Controls
|
Power, up/down volume, Listen button for end user channel selection
|
|
Programming
|
Via software and USB port
|
|
Set-up Controls
|
Press and hold up/down volume buttons for 5 seconds to enter channel adjust, use up/down to select channel
|
+Indicators
|
LEDs
|
White, illuminated when unit is on, flashes when batteries are low or to indicate charging, solid when fully charged
|
|
Display
|
Channel designation, battery level, unit number, charging status
|
+RF
|
Frequency Range
|
216.0125 - 216.9875MHz
|
|
Number of Channels
|
19 wide band, 38 narrow band
|
|
Sensitivity
|
.6uV typical, 1 uV maximum for 12 dB sinad
|
|
Frequency Accuracy
|
± .005% stability 32 to 122 ºF (0 to 50 ºC)
|
|
Squelch
|
Programmable in 20 steps, automatic on loss of RF signal
|
|
Antenna Type
|
Uses ear phone/neck loop lanyard and short ear phone cable or standard earphone cable
|
+Power
|
Power Supply
|
Micro USB connector, 5 V, 500 mA
|
|
Battery Type
|
Lithium-ion
|
|
Battery Life
|
8 Hours of continuous use
|
|
Battery Charging Time
|
Fully charged in 2 Hours
|
+Physical
|
Color
|
Dark Grey
|
|
Unit Weight with Batteries
|
2.4 oz (68.1 g)
|
|
Shipping Weight
|
3.2 oz (90.8 g) with 16 oz (454 g) minimum
|
|
Dimensions (H x W x D)
|
3.75 x 2.0 x 0.64 in. (9.6 x 5.0 x 1.7 cm)
|
|
Unit Weight
|
1.6 oz (45.4 g)
|
|
Dimensions with Belt Clip
|
3.75 x 2.0 x 0.80 in. (9.6 x 5.0 x 2.1 cm)
|
+Environmental
|
Temperature - Operation
|
14 to 104 ºF (-10 to 40 ºC)
|
|
Temperature - Storage
|
(-)4 to 122 °F (-20 to 50 °C)
|
|
Relative Humidity
|
0 to 95% relative humidity, non-condensing
|
