The QSC AcousticDesign™ AD-C4T-LP is a 4.5" two-way low profile ceiling loudspeaker ideally suited for a wide variety of foreground and background sound reinforcement applications which utilize 70/100V or 16Ω bypass configurations. The AcousticDesign™ Series offers integrators a premium quality installed sound solution where performance, consistent coverage, and aesthetics are paramount. Specifically designed to maintain a consistent tonal characteristic across the entire family in ceiling, surface, and pendant applications, the AcousticDesign series allows integrators seamless transitions within blended installations. The AD-C4T features a high quality 4.5" weather treated paper cone woofer with a 1" voice coil and a .75" aluminum dome tweeter which is positioned on a DMT waveguide. DMT (Directivity Matched Transition™) is QSC’s design philosophy where the high frequency waveguide is matched to the natural conical behavior of the woofer at the crossover point. The result is a coherent transition between transducers with improved off-axis power response for consistent 150° conical DMT coverage. The accurate frequency response of the AD-C4T-LP is maintained even in 70/100V applications by use of a low-loss, lowsaturation 30-watt transformer with selectable taps, including 16Ω bypass, using a rotary selector located under the snap-fit magnetically attached powder coat steel grille.
|
Effective frequency range1
|
70 Hz – 20 kHz
|
|
Rated noise power / voltage2
|
30 watts / 22 volts (rms)
|
|
Sensitivity [dB]3
Sensitivity at 4m, 100V maximum tap
|
87
TBD
|
|
Rated coverage (-6 dB)4
|
150° conical DMT
|
|
Directivity factor (Q)
|
4.5
|
|
Directivity index (DI) [dB]
|
6.5
|
|
Maximum continuous SPL [dB]5
|
102
|
|
Maximum peak SPL [dB]5
|
108
|
|
Nominal impedance [ohms]
|
16
|
|
Recommended amplifier
|
60 watts
|
|
Transformer taps / impedance
|
16Ω (in bypass setting)
3.75W (70V); 7.5W (100V) Tap: 1333Ω
7.5W (70V); 15W (100V) Tap: 667Ω
15W (70V); 30W (100V) Tap: 333Ω
30W (70V); N/A (100V) Tap: 167Ω
|
|
LF transducer
|
114 mm [4.5-inch] weather resistant paper cone woofer
|
|
HF transducer
|
19 mm [0.75-inch] aluminum dome tweeter
|
|
Input connector type
|
Euroblock connector with parallel output
|
|
Enclosure material
|
ABS baffle on powder coated steel back can
|
|
Grille material
|
Powder coated steel
|
|
Ingress protection
|
IP-34
|
|
Operating environment
|
Designed for indoor use
|
|
Operating temperature range
|
-20 to 50° C [-4 to 122° F]
|
|
Cutout dimension
|
Ø 245 mm [Ø 9.65-inch]
|
|
Net weight
|
3 kg [6.6 lb]
|
|
Product dimensions (Diameter x Height)
|
Ø 280 x 100 mm [Ø 11.02 x 3.93-inch]
|
|
Shipping weight
|
10.2 kg [22.5 lb] (pair packed)
|
|
Shipping dimensions (H x W x D)
|
183 x 699 x 394mm [7.2 x 27.5 x 15.5-inch](pair packed)
|
|
Included accessories
|
C-ring and tile rails, rail screws, euroblock connector, cut-out template, tether grille
|
|
Optional accessories
|
AD-MR6 (pre-install mud ring)
AD-CC6 (pre-install conduit cover)
|
|
Safety Agency
|
UL1480, UL2043, NFPA90, NFPA70 suitable for use in air handling spaces. Transformer UL registered per UL1876, ROHS, C-Tick X000, CE compliant. Baffle meets UL94-V0 and UL94-5VB flammability rating; in accordance with IEC60849 / EN60849 systems.
|
