Features

  • Exclusive PowerLight switch-mode power supply technology for high performance and compact size
  • Custom integrated security cover for tamper proof installations
  • Variable speed fan for low noise
  • 1-dB detented gain controls for fast and accurate gain settings
  • Active inrush limiting eliminates AC inrush current, removing the need for expensive power sequencers
  • XLR and detachable Euro style input connectors
  • HD15 DataPort connector for Q-SYS networked control and monitoring
  • Dip switch control for clip limiters, high pass filters, bridge mono and parallel operation
  • Selectable high pass filters protect speakers and prevent speaker transformer saturation with minimal effect on program material (33 Hz or 75 Hz)
  • Comprehensive front panel indicators including signal, clip, protect and QSC's exclusive bridge mono and parallel input LEDs
  • Barrier strip output connector
  • Comprehensive protection circuitry including DC, infrasonic, thermal overload and short circuit protection
  • Optional external transformer accessory pack for isolated 25-, 70-, and 100-volt outputs (converts CX302 to 400 watts per channel, or 300 watts into 25 V)
  • Compact size - only 2 rack units high and 14" deep for reduced rack cost and floor space
  • Lightweight - weighs only 21 pounds (9.5 kg) for easier racking and shipping
  • 3-year warranty plus optional 3-year extended service contract
  • All CX Series amplifiers meet the European Union's 2006 RoHS directive to restrict the use of hazardous materials used in electronic devices.
SPECIFICATIONS CX302 CX502 CX702 CX902 CX1102 CX302V CX602V CX1202V
  POWER PER CHANNEL, STEREO MODE, Both Channels Driven
8Ω, 20 Hz–20 kHz, 0.05% THD 200 W 300 W 425 W 550 W 700 W - 550 W 700 W
4Ω, 20 Hz–20 kHz, 0.05% THD 325 W 500 W 700 W 900 W 1100 W - - 1100 W
2Ω, 1 kHz, 1% THD 600 W 800 W 1200 W 1500 W 1700 W - - -
70V, 20 Hz–20 kHz, 0.05% THD 400 W with IT-42* - - 400 W 800 W 200 W 400 W 800 W
70 V, 1 kHz, 0.05% THD - - - 440 W 1000 W 250 W 440 W 1000 W
70 V, 1 kHz, 1% THD - - - 600 W 1200 W 300 W 600 W 1200 W
  POWER, BRIDGED MONO MODE
16Ω, 20 Hz–20 kHz, 0.1% THD 400 W 600 W 850 W 1100 W 1400 W - 1100 W 1400 W
8Ω, 20 Hz–20 kHz, 0.1% THD 700 W 1100 W 1500 W 2000 W 2200 W - - 2200 W
4Ω, 1 kHz, 1% THD 1200 W 1600 W 2400 W 3000 W 3400 W - - -
140 V, 20 Hz–20 kHz, 0.05% THD - - - 800 W 1600 W 400 W 800 W 1600 W
140 V, 1 kHz, 0.05% THD - - - 880 W 2000 W 500 W 880 W 2000 W
140 V, 1 kHz, 1% THD - - - 1200 W 2400 W 600 W 1200 W 2400 W
Noise, 20 Hz–20 kHz -107 dB -107 dB -106 dB -106 dB -106 dB -106 dB -106 dB -106 dB
Input Sensitivity @ 8 ohms 1.26 Vrms 1.23 Vrms 1.16 Vrms 1.17 Vrms 1.35 Vrms 1.26 Vrms 1.26 Vrms 1.26 Vrms
Maximum Voltage Gain 30 dB 32 dB 34 dB 35 dB 35 dB 35 dB 35 dB 35 dB
Output Circuitry Class AB+B AB+B H, 2-tier H, 2-tier H, 2-tier AB+B AB+B H, 2-tier
  ALL MODELS
Distortion (SMPTE-IM) Less than 0.02%
Distortion (Typical) 20 Hz–20 kHz: 10 dB below rated power 1.0 kHz and below: full rated power Less than 0.01% THD Less than 0.01% THD
Frequency Response 20 Hz–20 kHz, ±0.2 dB
Damping Factor  

Greater than 500
Input Impedance  

6 kΩ unbalanced, 12 kΩ balanced
Input Clipping  

10 V rms (+22 dBu)
Cooling  

Variable-speed fan, rear-to-front air flow
Connectors, each channel    

Input: 3-pin XLR & 3-pin detachable terminal blocks (1 each per channel) Output: Safety-shrouded barrier strip
Amplifier Protection  

Full short circuit, open circuit, thermal, ultrasonic, and RF protection. Stable into reactive or mismatched loads.
Load Protection  

On/off muting, DC-fault power supply shutdown
Dimensions (HWD) inches  

3.5 x 19 x 14 / 2RU
Dimensions (HWD) mm  

89 x 483 x 356 / 2RU
Weight  

21 lb (9.5 kg) net 27 lb (12.3 kg) shipping
List price: $1,535.00
Price: $1,535.00
SKU: CX302
Catalog: 
Commercial Amplifiers
Brand: 
QSC Audio
Dimensions: 24 in × 18 in × 6 in
Weight: 27 lb